New status queues page

Ocid

And the Borrows/Suspends/Drops are constantly zero even though /tmp/qstats -file shows dropped packets:

![Screen Shot 2013-02-14 at 13.37.33.JPG](/public/imported_attachments/1/Screen Shot 2013-02-14 at 13.37.33.JPG)
![Screen Shot 2013-02-14 at 13.37.33.JPG_thumb](/public/imported_attachments/1/Screen Shot 2013-02-14 at 13.37.33.JPG_thumb)

Cino

any update when this page will display the interface then the queues?

Ocid

@Cino:

any update when this page will display the interface then the queues?

For me now snapshot built on Wed Feb 13 16:46:49 EST 2013 (and few before that) shows interface and then queues, but only if I select scheduler type HFSC or CBQ. If I use scheduler FAIRQ or PRIQ then the interfaces are not shown.

![HFSC or CBQ.JPG](/public/imported_attachments/1/HFSC or CBQ.JPG)
![HFSC or CBQ.JPG_thumb](/public/imported_attachments/1/HFSC or CBQ.JPG_thumb)
![FAIRQ or PRIQ.JPG](/public/imported_attachments/1/FAIRQ or PRIQ.JPG)
![FAIRQ or PRIQ.JPG_thumb](/public/imported_attachments/1/FAIRQ or PRIQ.JPG_thumb)

Cino

i'm using PRIQ :-(

Cino

Do we have an ETA when the new queue status page will be fully operational?

mdima

Hi Cino,
I just released a version that fixes the drops issue. The borrows/suspends should also be shown.
Btw, I will check also the other types of queues, I need to see what qstats saves in that cases.

Ciao,
Michele

mdima

Hey,
everything should be fixed in the next release…

Ciao,
Michele

Cino

@mdima:

Hey,
everything should be fixed in the next release…

Ciao,
Michele

Thank you Michele… The page looks sweet!

mdima

You're welcome Cino! Even if the best result is with a hierarchical queue scheduler type (see image).

I can't wait to implement version 2.1 in my production environment when it will be ready, so I can see it in action with real traffic!

Ciao,
Michele

queues.png_thumb

xbipin

the length field never gets populated

mdima

@xbipin:

the length field never gets populated

well… which scheduler type are you using? And, please post your /tmp/qstats file, so we can take a look at it

xbipin

CBQ

 <altqstats><queue><name>root_pppoe0</name>
	<interface>pppoe0</interface>
	<bandwidth>1Mb</bandwidth>
	<priority>0</priority>
	<pkts>5261</pkts><bytes>920848</bytes><droppedpkts>0</droppedpkts><droppedbytes>0</droppedbytes><qlength>0/50</qlength><borrows>0</borrows><suspends>0</suspends><measured>84.8</measured><measuredspeed>110.17Kb</measuredspeed><measuredspeedint>110173.5</measuredspeedint>
	 <queue><name>qACK</name>
		<interface>pppoe0</interface>
		<bandwidth>1Mb</bandwidth>
		<priority>6</priority>
		<qlimit>150</qlimit>
		<pkts>4552</pkts><bytes>186740</bytes><droppedpkts>0</droppedpkts><droppedbytes>0</droppedbytes><qlength>0/150</qlength><borrows>0</borrows><suspends>0</suspends><measured>74.4</measured><measuredspeed>24.40Kb</measuredspeed><measuredspeedint>24401.0</measuredspeedint></queue> 
	 <queue><name>qOthersDefault</name>
		<interface>pppoe0</interface>
		<bandwidth>1Mb</bandwidth>
		<priority>4</priority>
		<qlimit>150</qlimit>
		<pkts>581</pkts><bytes>724307</bytes><droppedpkts>0</droppedpkts><droppedbytes>0</droppedbytes><qlength>0/150</qlength><borrows>507</borrows><suspends>0</suspends><measured>8.5</measured><measuredspeed>84.58Kb</measuredspeed><measuredspeedint>84575.1</measuredspeedint></queue> 
	 <queue><name>qP2P</name>
		<interface>pppoe0</interface>
		<bandwidth>1Mb</bandwidth>
		<qlimit>100</qlimit>
		<pkts>17</pkts><bytes>2234</bytes><droppedpkts>0</droppedpkts><droppedbytes>0</droppedbytes><qlength>0/100</qlength><borrows>0</borrows><suspends>0</suspends><measured>0.3</measured><measuredspeed>265.96 b</measuredspeed><measuredspeedint>266.0</measuredspeedint></queue> 
	 <queue><name>qVoIP</name>
		<interface>pppoe0</interface>
		<bandwidth>1Mb</bandwidth>
		<priority>7</priority>
		<qlimit>120</qlimit>
		<pkts>8</pkts><bytes>752</bytes><droppedpkts>0</droppedpkts><droppedbytes>0</droppedbytes><qlength>0/120</qlength><borrows>0</borrows><suspends>0</suspends><measured>0.1</measured><measuredspeed>86.04 b</measuredspeed><measuredspeedint>86.0</measuredspeedint></queue> 
	 <queue><name>qOthersHigh</name>
		<interface>pppoe0</interface>
		<bandwidth>1Mb</bandwidth>
		<priority>5</priority>
		<pkts>103</pkts><bytes>6815</bytes><droppedpkts>0</droppedpkts><droppedbytes>0</droppedbytes><qlength>0/50</qlength><borrows>0</borrows><suspends>0</suspends><measured>1.6</measured><measuredspeed>845.35 b</measuredspeed><measuredspeedint>845.4</measuredspeedint></queue></queue> 
 <queue><name>root_vr0</name>
	<interface>vr0</interface>
	<bandwidth>16Mb</bandwidth>
	<priority>0</priority>
	<pkts>10087</pkts><bytes>14014218</bytes><droppedpkts>0</droppedpkts><droppedbytes>0</droppedbytes><qlength>0/50</qlength><borrows>0</borrows><suspends>0</suspends><measured>164.6</measured><measuredspeed>1.84Mb</measuredspeed><measuredspeedint>1840151.0</measuredspeedint>
	 <queue><name>qACK</name>
		<interface>vr0</interface>
		<bandwidth>16Mb</bandwidth>
		<priority>6</priority>
		<qlimit>150</qlimit>
		<pkts>434</pkts><bytes>26388</bytes><droppedpkts>0</droppedpkts><droppedbytes>0</droppedbytes><qlength>0/150</qlength><borrows>0</borrows><suspends>0</suspends><measured>6.4</measured><measuredspeed>3.10Kb</measuredspeed><measuredspeedint>3098.7</measuredspeedint></queue> 
	 <queue><name>qOthersDefault</name>
		<interface>vr0</interface>
		<bandwidth>16Mb</bandwidth>
		<priority>4</priority>
		<qlimit>150</qlimit>
		<pkts>9525</pkts><bytes>13916340</bytes><droppedpkts>0</droppedpkts><droppedbytes>0</droppedbytes><qlength>0/150</qlength><borrows>8409</borrows><suspends>0</suspends><measured>156.2</measured><measuredspeed>1.83Mb</measuredspeed><measuredspeedint>1827647.6</measuredspeedint></queue> 
	 <queue><name>qP2P</name>
		<interface>vr0</interface>
		<bandwidth>16Mb</bandwidth>
		<qlimit>100</qlimit>
		<pkts>115</pkts><bytes>70684</bytes><droppedpkts>0</droppedpkts><droppedbytes>0</droppedbytes><qlength>0/100</qlength><borrows>0</borrows><suspends>0</suspends><measured>1.8</measured><measuredspeed>9.30Kb</measuredspeed><measuredspeedint>9298.2</measuredspeedint></queue> 
	 <queue><name>qVoIP</name>
		<interface>vr0</interface>
		<bandwidth>16Mb</bandwidth>
		<priority>7</priority>
		<qlimit>120</qlimit>
		<pkts>0</pkts><bytes>0</bytes><droppedpkts>0</droppedpkts><droppedbytes>0</droppedbytes><qlength>0/120</qlength><borrows>0</borrows><suspends>0</suspends><measured>0.0</measured><measuredspeed>0 b</measuredspeed><measuredspeedint>0.0</measuredspeedint></queue> 
	 <queue><name>qOthersHigh</name>
		<interface>vr0</interface>
		<bandwidth>16Mb</bandwidth>
		<priority>5</priority>
		<pkts>13</pkts><bytes>806</bytes><droppedpkts>0</droppedpkts><droppedbytes>0</droppedbytes><qlength>0/50</qlength><borrows>0</borrows><suspends>0</suspends><measured>0.2</measured><measuredspeed>106.47 b</measuredspeed><measuredspeedint>106.5</measuredspeedint></queue></queue></altqstats>

mdima

Hi xbipin,
I was forcing my development pfSense to load your qstats output, and I can confirm you that the length field gets populated. The values "0/50", "0/150" and so on are the exact values that qstats reports as length of the queue.

Probably you mean "why 0"? Because just there are not any packets in the queue, your internet connection is fast enough to handle the packets without "parking" them in the queue. Try to lower the bandwidth available in your root queue (try for example 1Mbit) and you will see some packets left in the queue.

Ciao,
Michele

xbipin

i tried lowering the download speed to 1mbps and i do see the length now getting populated but it seems the root queue doesnt populate, only the child queues do

xbipin

also i modified the root queue length to 150 but it still shows 0/50 instead of 0/150, the child queue length show fine as configured

mdima

Ok, that works then!

About the root queue, it is normal, since each queue has his own length and is managed individually (I can't aggregate that data as I do for the rest of the statistics, it would not make any sense).

Ciao,
Michele

xbipin

so wouldnt it be better to simply remove length field from root queue

mdima

Well, qstats (the program that extracts the statistics from the queues) and the page (that reads/aggregate/shows that data) do not know which traffic is assigned to which queue. I can't exclude that the root queue can handle some traffic…

If someone in this forum can confirm that the root queue will not handle ANY traffic in ANY case I can just hide the field "length" for the root queue (it really takes a second)...

athurdent

IIRC the root queue is just the definition for your queues. It's something like

altq on  em1 hfsc bandwidth 5Mb queue {  qACK,  qDefault,  qVoIP  }

You cannot put anything in there, everything that is not classified goes into the default queue.

mdima

@athurdent:

IIRC the root queue is just the definition for your queues. It's something like
altq on  em1 hfsc bandwidth 5Mb queue {  qACK,  qDefault,  qVoIP  }
You cannot put anything in there, everything that is not classified goes into the default queue.

Ok, that's valid for HFSC, but for the other types of scheduler?