Dansguardian package for 2.0

wheelz

It turns out to be exactly 488 MB is the most I can give it. If I do 489 MB or higher the error seems to indicate that it didn't actually do it and it is still set to 128MB. I still get the memory errors with 488 MB as well.

wheelz

Any ideas on this? I guess I'm kind of stuck in my configuration until this is resolved.

marcelloc

@marcelloc:

The hard limit is configured to 512. Try 500.

I'll find the option to increase it and post here.

The other value to increase is
suhosin.memory_limit = 512435456 on /etc/rc.php_ini_setup

Until I find a way to reduce dansguardian memory load during config save, you may need to increase these values.

samham

I was able to setup the groups feature, and I'm glad to report it's working as expected, except for one problem: every time I make a change to dansguardian the content of the "ipgroups" file is wiped out. any suggestions

Dansguardian 2.12.0.3 pkg v.0.1.7_3
2.1-BETA1 (amd64) built on Sat Feb 23 11:00:21 EST 2013

Rossi

Dear Community,

I am trying to setup dansguardian with groups / user authentification.

Dansguardian already works but I'm not really sure about how to set it up including authentification.
When I enable auth at the squid proxy and directly connect the browser to it I get the auth prompt and I am able to login and use the proxy.
The problem is now when I switch back the browser proxy setting to the dansguardian 8080 port I can browse the web with dansguardian rules active but without any auth prompt. Even when I change the "Auth Plugins" setting under general it stays the same.
Well… am I doing it wrong?
Thx for your help.

wheelz

@marcelloc:

@marcelloc:

The hard limit is configured to 512. Try 500.

I'll find the option to increase it and post here.

The other value to increase is
suhosin.memory_limit = 512435456 on /etc/rc.php_ini_setup

Until I find a way to reduce dansguardian memory load during config save, you may need to increase these values.

There has got to be a memory leak or something to that effect. I found that if you set that value in /etc/rc.php_ini_setup to 2 GB or higher then it doesn't take it and you go back to 128 MB. So I set it to a max of 1.99 GB. I then kept bumping up the other values listed earlier and eventually got to 2000 MB (not quite 2GB) and I still get this almost all of the time:

Fatal error: Allowed memory size of 2097152000 bytes exhausted (tried to allocate 136184137 bytes) in /usr/local/pkg/dansguardian.inc on line 1150

I used top and watched the php processes. I didn't even make any changes to any settings, just picked an ACL in the DG config and hit save. I saw 2 php processes consume 100% of CPU1 and CPU2 and memory go up to close to 2GB and that's when I get the error. It took a good 30 seconds to a minute afterwards for it to drop off. The very first time I hit save it did not error, but even after a reboot for some reason it has done it ever since. Any ideas? This seems like more than just it using more memory as I can't see how saving some config files would eat up this much resources.

marcelloc

fetch this dansguardian.inc file from my repo, it has a lot o debug

http://e-sac.siteseguro.ws/packages/dansguardian/dansguardian.inc.txt

download it and save on /usr/local/pkg/dansguardian.inc

this inc file will stop process to show memory usage, if you want to test a full save config, remove the exit at line 1210.

on my testes, memory usage stays below 128Mb.

mschiek01

Here is what I get using this as it still errors out.

debug1 - start sync 3302080

debug2 - check xml values and sample files 3332920

debug3 - check ssl certificates 3341056

debug4 - memory load before phrase ACL 3343848

debug5 - check phrase ACL 3344448

debug6 - check site ACL 3352040

debug7 - check URL ACL  3344728

debug8 - check pics and search ACL 3358944

debug9 - check file ACL  3359088

debug10 - check header ACL  3359232

debug11 - check content ACL  3359376

debug12 - antivirus ACL and report log 3359520

debug13 - memory usage before filtergroups 3458528

debug14 3498576

debug15 3498576

debug14 3518144

debug15 3518144

debug14 3516760

debug15 3516760

debug14 3518816

debug15 3518816

debug16  - check filtergroups 3530456

debug17 - check blacklists ACL 3530456

debug18 - check clamav 3581648

debug19 - check cron 3585200

debug20 - check cron 3590328

debug21 - second write config  3695688

debug21 3645808

debug22 3589016

debug23 3587592
Fatal error: Allowed memory size of 262144000 bytes exhausted (tried to allocate 17023311 bytes) in /usr/local/pkg/dansguardian.inc on line 1156

mschiek01

@wheelz:

@marcelloc:

@marcelloc:

The hard limit is configured to 512. Try 500.

I'll find the option to increase it and post here.

The other value to increase is
suhosin.memory_limit = 512435456 on /etc/rc.php_ini_setup

Until I find a way to reduce dansguardian memory load during config save, you may need to increase these values.

There has got to be a memory leak or something to that effect. I found that if you set that value in /etc/rc.php_ini_setup to 2 GB or higher then it doesn't take it and you go back to 128 MB. So I set it to a max of 1.99 GB. I then kept bumping up the other values listed earlier and eventually got to 2000 MB (not quite 2GB) and I still get this almost all of the time:

Fatal error: Allowed memory size of 2097152000 bytes exhausted (tried to allocate 136184137 bytes) in /usr/local/pkg/dansguardian.inc on line 1150

I used top and watched the php processes. I didn't even make any changes to any settings, just picked an ACL in the DG config and hit save. I saw 2 php processes consume 100% of CPU1 and CPU2 and memory go up to close to 2GB and that's when I get the error. It took a good 30 seconds to a minute afterwards for it to drop off. The very first time I hit save it did not error, but even after a reboot for some reason it has done it ever since. Any ideas? This seems like more than just it using more memory as I can't see how saving some config files would eat up this much resources.

I was having these same problems on both Mailscanner and Dansguardian. I was finally able to get this fixed. What I figured out is that there were some old versions of the packages still installed.

I unistalled the programs in question from the package manager. Mailscanner and Dansguardian as well as squid.
Go to the command line and enter pkg_info
Look for previous versions of these packages and do a pkg_delete -f "package name"
make sure to manually delete /usr/local/pkg/blacklist.tgz
Then go back to package manager and reinstall. In my case Mailscanner then squid the Dansguardian.

Go back into the gui and save the configs, no more memory errors.

marcelloc

@mschiek01:

Go back into the gui and save the configs, no more memory errors.

great troubleshooting, I'll test it here ASAP.

wheelz

Somehow with the that script I ended up with an install that wouldn't boot. So I just wiped and started over. So far I haven't seen the memory errors so that is good. I'll look for residual packages with pkg_info next time.

dig1234

Hi, what is the status of SSL MITM filtering?
In my tests with latest package browser just hangs with MITM enabled?

wheelz

@dig1234:

Hi, what is the status of SSL MITM filtering?
In my tests with latest package browser just hangs with MITM enabled?

With google, facebook, and others going https, this is really needed. I want to encourage anyone interested in this to help post bounty: http://forum.pfsense.org/index.php/topic,58368.0.html. I'll give mine but we need more than I can afford for my personal use to get a priority on this feature.

ZGruk

I'm trying to install dansguardian on the latest 2.1 build, and I'm not getting it to work. I installed the squid and dansguardian packages and set them up, but when I test to see if its blocking anything, it doesn't block.

When I reboot pfSense, it spits out a bunch of errors when it tries to start dansguardian. I tried to capture them all, but I may have missed some.

Warning: file_put_contents(/usr/pbi/dansguardian-i386/dansguardian/
contentscanners/<variouslists>): failed to open stream: Read-only 
file system in /usr/local/pkg/dansguardian.inc on line <various lines="" see="" list="" below=""></various></variouslists>

I'm not sure I got all the lines, but the ones I got were:
647
662
669
676
683
702
–- a gap where I might have missed some ---
909
911
915
919

Then there's another series of errors


Warning: closedir() expects parameter 1 to be resource, null given in 
/usr/local/pkg/dansguardian.inc on line 69

Warning: file(/usr/local/share/certs/ca-root-mss.crt): failed to open stream:
no such file or directory in /usr/local/pkg/dansguardian.inc on line 74

Warning: Invalid argument supplied for foreach() in /usr/local/pkg/dansguardian.inc on lind 76

So apparently there's something wrong with /usr/local/pkg/dansguardian.inc?
Suggestions are appreciated.

EDIT:
I changed the permissions on the dansguardian.inc file to make sure it wasn't read only, and all of the read only errors went away. The last three errors are still there however, and its not blocking sites.
Also, I don't know if its related, but squid is taking what experience tells me is an exceptionally long time to startup. It doesn't give any errors, just takes awhile to start.

Third, possibly not related, after installing dansguardian and squid and rebooting, I can no longer access my webConfigurator. It just times out. if I reset to factory settings, it will work fine, but after installing and rebooting again, it once again times out. I haven't tried to figure out whether its dansguardian, squid, 2.1 BETA, or some combination thereof thats causing this. The first time I had this problem I assumed it was the beta version of squid3 that I had installed, but now its happening again with the normal squid package.

marcelloc

@ZGruk:

Third, possibly not related, after installing dansguardian and squid and rebooting, I can no longer access my webConfigurator.

Startup erros on packages breaks webconfigurator and some rules load.
Can you check on console what errors are you getting.

I've tested dansguardian on 2.1 before pushing the code, I'll start a new test run.

ZGruk

I rebooted just now and discovered that all of the read-only errors in my previous post are back, plus some errors from squid and I think more that I hadn't seen before from dansguardian. Is there a log I can find that shows these errors? I've been trying to take pictures of the screen as they flash by, but obviously that doesn't work very well.

marcelloc

I think it's on system logs but you can use scroll lock key and up and down arrow to move on screen to see what errors you got.

ZGruk

Here are the errors that appear during booting.


Starting package squid...

Warning: chown() Read-only file system in /usr/local/pkg/squid.inc on line 77

Warning: chgrp() Read-only file system in /usr/local/pkg/squid.inc on line 78
9

Those errors are repeated many times (probably over 100)


Warning: file_put_contents(/usr/pbi/squid-i386/etc/squid/squid.conf): failed to
open stream: Read only file system in /usr/local/pkg/squid.inc on line 1159
done.
Starting package Dansguardian...
Warning: file_put_contents(/usr/pbi/dansguardian-i386/etc/dansguardian/lists/exc
eptionfilesitelist.Default): failed to open stream: Read-only file system in /us
r/local/pkg/dansguardian.inc on line 409

Warning: file_put_contents(/usr/pbi/dansguardian-i386/etc/dansguardian/lists/ban
nedsitelist.Default): failed to open stream: Read-only file system in /us
r/local/pkg/dansguardian.inc on line 417

Warning: file_put_contents(/usr/pbi/dansguardian-i386/etc/dansguardian/lists/gre
ysitelist.Default): failed to open stream: Read-only file system in /us
r/local/pkg/dansguardian.inc on line 424

Warning: file_put_contents(/usr/pbi/dansguardian-i386/etc/dansguardian/lists/log
sitelist.Default): failed to open stream: Read-only file system in /us
r/local/pkg/dansguardian.inc on line 431

Warning: file_put_contents(/usr/pbi/dansguardian-i386/etc/dansguardian/lists/ban
nedurllist.Default): failed to open stream: Read-only file system in /us
r/local/pkg/dansguardian.inc on line 467

Warning: file_put_contents(/usr/pbi/dansguardian-i386/etc/dansguardian/lists/exc
eptionfileurllist.Default): failed to open stream: Read-only file system in /us
r/local/pkg/dansguardian.inc on line 474

Warning: file_put_contents(/usr/pbi/dansguardian-i386/etc/dansguardian/lists/exc
eptionregexpurllist.Default): failed to open stream: Read-only file system in /us
r/local/pkg/dansguardian.inc on line 481

And so on and so forth down to line 919. Then there are some different errors:


Warning: closedir()expects parameter 1 to be resource, null given in /usr/local
/pkg/dansguardian.inc on line 69

Warning: file(/usr/local/share/certs/ca-root-nss.crt): failed to open stream: No
 such file or directory in /usr/local/pkg/dansguardian.inc on line 74

Warning: Invalid argument supplied for foreach() in /usr/local/pkg/dansguardian.
inc on line 76
done.

It almost all appears to be related to the supposedly read only files. I've checked to make sure they are writable.
The permissions on squid.inc are -rwxr-xr-x and the permissions on dansguardian.inc (I changed them the first time I got the errors) are -rwxrwxrwx.

marcelloc

Are you using nanobsd?

ZGruk

Yes, I am. You think that might be the issue?