Port forwarding is not working
-
Your saying that if you use UPnP with pfsense that it works - or do you mean if you use UPnP when just connected to your ISP device then it works?
-
If I enable uPnP on the pfsense router and enable it within uTorrent then uTorrent passes its internal tests for d/l & u/l and gives a green check mark showing the port is open. Once that's done I see other people connect to my client and I see them uploading.
At this point I have not done anything on the ISP side of the pfsense router.
R
-
Well things seemed to work but after a bit it all seems to die…so just as you said - it's not going to work. I called the ISP and their modem was currently set in 'router' mode. They are going to switch it to 'bridge' mode and I will have to manually enter the WAN IP address to the pfsense router - not a big deal.
I'll update the thread with the, hopefully, successful results. ;D
R
edit Hmmm...hopefully I do that right! Under the WAN interface I'm guessing I set the "Type" to "Static"
-
yeah if they are going to give you a IP to set, then it would be static on the wan interface, you will need the netmask and the gateway address to use as well.
Once you on public on pfsense wan, you should be golden! Please do let us know.
-
The ISP set their radio to bridge mode and gave me the static IP, gateway IP and subnet mask of 255.255.255.0. For the life of me I could not find where to change the subnet and under the Interface Status page the WAN subnet showed 255.255.255.255.
While the tech was on the phone I apologized and asked them to set the radio back to 'router' mode so that I could access the forums and ask how/if it was possible to change the WAN subnet. Unfortunaetly I now could not access the Internet despite being assigned a DHCP address (192.168.25.179)! I called them back and they said they would come out next Teusday…sigh.
Well that wasn't going to cut it for me... but so as not to ramble on too much about my attempts to get things going ;D I ended up plugging in the router that I had setup as a Wireless AP and in trying to reset the wan/lan info it would reset to 10.0.0.0 and the login page was for AirOS (their WebGUI login). Back on the phone to tech....here's a clue for you (ISP) guys and that's when they realized they f&^(&d up the reset. ::) Now that I have internet access again I can start rebuilding my network.
Question is...is it possible to change the WAN subnet from 255.255.255.255 to what they want 255.255.255.0 or is this some oddball setup on their part? If changing it is possible where do I find it?
Thanks so much for all the help…I'm hoping we are seeing the light at the end of the tunnel.
Randy
edit I don't like being a noob :-[ but after plugging in the pfsense router my dhcp assigned address is now 10.0.0.113 and not the 192.168.25.179. I have no ideas of the implication of this but I have internet so I'm not going to touch it just yet..especially now that there will be no tech support for the weekend. If this is BAD please let me know. :-X
-
And that is still a PRIVATE address 10.0.0.113
10.x.x.x, 192.168.x.x and 172.16-31 are all private and put you in same boat.
Did you notice the dropdown where it says /32 – just change that to /24 if they are giving you a 255.255.255.0 mask.
-
Awesome…thank you, I would never have stumbled onto that. I'll give them a call during the week when there is tech support available to change the radio back to bridge mode and I'll let you know how it pans out.
R
-
Well a tech called me on a Sunday! Static IP is setup and port forwarding is working like a charm now. Thank you very much!!
One thing I noticed after the change up the RTT under Gateways went from .25(ish) ms for the dhcp address to 1.5(ish) ms under the static IP. Probably not a big deal…just curious (as always).
So how do I go about buying you a beer? ;D
R
-
sub-1 ms means it was an IP local to you, probably on the radio in that case. The gateway for a real public IP will be upstream somewhere on the provider's network most of the time with a WISP, which is going to take more than 1 ms to get to (laws of physics, speed of radio waves, speed of light in fiber, etc. depending on the circumstance). Several ms wouldn't be uncommon, depends on where that router is and what you have to go through to get there and how congested the provider's network is.
-
Me? You want to buy me a beer? That is very thoughtful, and if you were in the area I would like nothing more to enjoy a cold one with another fan of pfsense.
But I suggest you donate the cost of the beer to pfsense - everyone wins that way.
http://www.pfsense.org/index.php?option=com_content&task=view&id=47&Itemid=77
http://www.pfsense.org/donate.htmlAs cmb mentions, before when you were doing NAT on the device on your roof pfsense gateway was right there local, now its somewhere inside the isp network, so yeah going to be a bit longer rtt to the gateway.
-
A donation has been sent. [Clink of beer glasses] Cheers!
Thank you very much for you help.
Randy