Shuttle ds61
-
In March Shuttle will start shipping DS61 v1.1 with two more USB 2.0 ports on the front.Also a new BIOS is available that during S3 sleep mode, the power consumption is dropped from 10W(old
DS61) to 5W(new DS61-v1.1) to fulfill the new EU requirement. -
I did read about that yes :) Does it run on the same hardware aside from that?
I tried running the 2.1 beta but I think it's far too buggy to run in production as I would get an IP but had no internet, and the 2.0.2 version doesn't work at all because pfsense need at least 1 working interface.I'm now running an esx version on it as it supported all hardware automatically ( which is a miracle on itself seeing vmware does not support much consumer hardware :) )
And I'm now running pfsense inside esx for about 3 days without any problems.
-
Does it run on the same hardware aside from that?
The bios file is exactly the same:
sum DS61D000-1.203/DOS/DS61D000.203 DS61D000.203/DOS/DS61D000.203
63712 4096 DS61D000-1.203/DOS/DS61D000.203
63712 4096 DS61D000.203/DOS/DS61D000.203so my guess is the MB is exactly the same.
-
a P2P load next to a cpu graph on a ds61 running 2.0.2 non-nano amd64
-
another P2P test, this time showing lots of connections
and continue to have a good experience with two RealTek 8111E -
Looks like Provantage has some ds61 v1.1 in-stock.
-
Ewiiz/Superbiiz has them in stock.
Price: $170.99
$8.99 Shipping$10 off with coupon code 'HOLEN1'.
https://www.superbiiz.com/detail.php?name=SYS-DS61
The v1.1 are $14 more.
https://www.superbiiz.com/detail.php?name=SYS-DS61V1
-
So this is just a bare bones system? How much am I looking (ball park) once I buy components for home user? give price range from low end components to higher end?
-
Just below $300.
Besides the DS61 you need CPU, RAM, (mSATA-) SSD.
-
Looks like Newegg has some ds61 v1.1 in-stock.
-
Status: Enabled for 58 days 03:25:09 Debug: Urgent Hostid: 0x0 Checksum: 0x0 Interface Stats for re1 IPv4 IPv6 Bytes In 404329976745 171540275 Bytes Out 52604531107105 0 Packets In Passed 6316852329 0 Blocked 132757 695686 Packets Out Passed 36741353131 0 Blocked 1032 0 State Table Total Rate current entries 381 searches 43621787077 8683.5/s inserts 20083552 4.0/s removals 20083171 4.0/s Source Tracking Table current entries 0 searches 0 0.0/s inserts 0 0.0/s removals 0 0.0/s Counters match 26145580 5.2/s bad-offset 0 0.0/s fragment 112 0.0/s short 3 0.0/s normalize 1474 0.0/s memory 0 0.0/s bad-timestamp 0 0.0/s congestion 0 0.0/s ip-option 32577 0.0/s proto-cksum 3455 0.0/s state-mismatch 16333 0.0/s state-insert 13975 0.0/s state-limit 0 0.0/s src-limit 0 0.0/s synproxy 0 0.0/s divert 0 0.0/s … re0 Cleared: Wed Feb 20 16:20:28 2013 References: [ States: 0 Rules: 55 ] In4/Pass: [ Packets: 291021585 Bytes: 322723592471 ] In4/Block: [ Packets: 5433224 Bytes: 877632373 ] Out4/Pass: [ Packets: 257021086 Bytes: 69504538669 ] Out4/Block: [ Packets: 6249 Bytes: 505529 ] In6/Pass: [ Packets: 0 Bytes: 0 ] In6/Block: [ Packets: 0 Bytes: 0 ] Out6/Pass: [ Packets: 0 Bytes: 0 ] Out6/Block: [ Packets: 0 Bytes: 0 ] re1 Cleared: Wed Feb 20 16:20:29 2013 References: [ States: 0 Rules: 23 ] In4/Pass: [ Packets: 6316974611 Bytes: 404328865954 ] In4/Block: [ Packets: 132757 Bytes: 7800971 ] Out4/Pass: [ Packets: 36742111455 Bytes: 52605625990371 ] Out4/Block: [ Packets: 1032 Bytes: 250836 ] In6/Pass: [ Packets: 0 Bytes: 0 ] In6/Block: [ Packets: 695706 Bytes: 171544737 ] Out6/Pass: [ Packets: 0 Bytes: 0 ] Out6/Block: [ Packets: 0 Bytes: 0 ]
-
-
It really ties the room together, does it not? :D
-
Are those mouse traps near the precariously dangling Dell power adapter?
The natural wood background is very nice.
-
To catch unwary power supply thieves! ;)
Steve
-
Interesting "average low voltage.. mouse trapped" wall there ;)
A bit off-topic, could you throw some "low voltage" light (pun intended..lol) on the top black box which has a company logo of ZON and the green boards hooked to a grey box on the top left.
-
-
I bought the Shuttle ds61 V1.1 which is slightly different from yours, but did you have any installation problems? I can't get passed VLAN and WAN setup after install. It says it does not detect any devices, so I'm assuming pfSense does not see the two onboard NICs. Had any problems with that?
Thanks
-
-
could you throw some "low voltage" light
The left top two are 20 port CAN bus star hubs for light switch touch pads, (the high voltage wall has SCRs dimmers on this CAN bus) the gray thing to its left is a linux box for CAN timed events and the two green cards below them are 8 input ports (doorbells, door position sensors, motion sensors) and 8 outputs (open garage door, relays for high current loads, recorded announcement triggers) all on the CAN bus.
As pointed out by 9k6 the Zon is an audio router with remote inputs, paging and recorded announcements, and below that is a vlan/lagg switch and then the ds61. The user interface (with hard speaker zone switch) looks like: