Load Balancing wont work, in my Opinion

Nachtfalke

Hi divotion,

If you are using multiple connections like donwloading a torrent or downloading from different sources you can get a summarized bandwith of WAN1+WAN2. But you will never get this bandwidth if you are just downloading with one connection.

Some download managers and torrent clients are downloading a file with many connections. In this case it could help you. But if you want to download a file then you can get max WAN1 or max WAN2.

www.speedtest.net seems to allow more connections and summarizes them both.

But as I said and cmb said, if you really like to have bonding then your ISP must bond the two connections and you have to bond your two connections. This is something you have to pay for by your ISP in general because it needs more configuration.

if you go to:
www.pfsense.org/ip.php
and you refresh the page fast then you will see that it shows one time the IP of WAN1 and the other time the IP of WAN2. This is Round Robin Load Balancing. If this works then LB is working as much as it can with your environment/ISP environment.

divotion

Hi…

I have 10 Connections on Jdownloader and 60 Connections on Usenet... And i cant get over 100mbit/s... i must have +- 150mbit/s... cant get it...

see Pictures:

Can you help me? i am verry confused about this... other people can get it work ... me not...

gateways_status.gif_thumb

group_status.gif_thumb

jdownloader.gif_thumb

lan_roule.gif_thumb

lan_trafficgraph.gif_thumb

wan_trafficgraph.gif_thumb

wan2_trafficgraph.gif_thumb

usenet.gif_thumb

ptt

If you do this:

if you go to:
www.pfsense.org/ip.php
and you refresh the page fast then you will see that it shows one time the IP of WAN1 and the other time the IP of WAN2. This is Round Robin Load Balancing. If this works then LB is working as much as it can with your environment/ISP environment.

Did you see your IP changing ?

From your attached IMG, i see no traffic in your WAN….

Can you attach an screenshot of your outbound NAT config ?

divotion

Only Sometimes i can see the ip changing … not often...

Here My Nat outgoing image and my network diagramm...

network_diagramm.jpg_thumb

outbound_nat.gif_thumb

divotion

Not i have Loadbalance… but only of 50mbit/s... the other 100mbit/s is untached... hmmm...

here screens

lan_new.gif_thumb

wan1_new.gif_thumb

wan2_new.gif_thumb

divotion

the seems to loadbalance the 50mbit/s line or the 100mbit/s line… not together...

here screens for loadbalance the 100mbit/s line...

lan_new2.gif_thumb

wan1_new2.gif_thumb

wan2_new2.gif_thumb

Nachtfalke

Do you have "Sticky connections" DISABLED ? It must be disabled.

What I often do to test if Load Balancing is really working I go to
maps.google.com and scroll in and out on different landscapes. When then having a look on the traffic graphs I can see bandwidth on all my WAN connections.

In general the configuration looks correct. And if www.pfsense.orf/ip.php is working then LB is working.
Do you use any other package on pfsense ? squid, squdguard, havp ?

divotion

Hi Nachtfalke

No i dont use other packages…

I try with a fresh installation... yesterday chose a new Account by newsdamon with 50 connections... same failure...

Nachtfalke

which version of pfsense are you using ? 2.1 or 2.0.x ?

divotion

i have hat 2.0.2 stable and then i have tried with the 2.1 beta….

now i installed 2.0.2 stable again... no luck

Loadbalancing is working... but not with 150mbit/s... cant unserstand this...

screens of loadbalancing works:

1.gif_thumb

2.gif_thumb

3.gif_thumb

cmb

The last screenshot looks a lot like what would happen if you had a 100 Mb LAN NIC, and/or a 100 Mb NIC on the client machine, or a 100 Mb switch on LAN in general. Is everything involved on gigabit internally?

divotion

I think now with my optinal Test, that is not a Pfsense Issue…

I have made an additional Netzwork Interface opt2 (lan2) thats route to opt1 (wan2)...
The lan roule i set to wan1...

then i attached another pc to opt2 for wan2
and my static pc on lan to wan1

the issue is the same... maybe the center is not allowed for more then 100mbit/s... i would tell next week...

here screens of pc 1 to wan and pc 2 to wan 2:

Foto.gif_thumb

Foto2.gif_thumb

rule1.gif_thumb

rule2.gif_thumb

divotion

@cmb:

The last screenshot looks a lot like what would happen if you had a 100 Mb LAN NIC, and/or a 100 Mb NIC on the client machine, or a 100 Mb switch on LAN in general. Is everything involved on gigabit internally?

Yes it is. on Site Pfsense / Fritzbox / PC …

Here Screen:

dash.gif_thumb

divotion

Hello dear PFSENSE Forum

The Problem was not Pfsense and Loadbalancing issue. It was that the Managed Switch by the technical instance was 100mbit/s…

Not the give me today a new Line in my House... Now is working with 150mbit/s...

Thank you all for your help...

Divotion