Build Pfsense router
-
I am running this: http://linitx.com/product/13242
Total price £150, no need for anything additional. I have BT fibre 80/20 - and can max out at 77, which is absolute limit anyway. Even at that the CPU only gets to around 30-40%.
Of course with the CF card that limits some options - but for what I want it is perfect.
Only planned change - I have acquired a 20GB 2" hard drive and plan to put that in to replace CF card - which will allow more freedom.
Of course this would not be ideal for heavy VPN use but as firewall and routing it works incredibly well - and is silent, runs cool and hardly takes any power.
Just an option…
-
I am running this: http://linitx.com/product/13242
Total price £150, no need for anything additional. I have BT fibre 80/20 - and can max out at 77, which is absolute limit anyway. Even at that the CPU only gets to around 30-40%.
Of course with the CF card that limits some options - but for what I want it is perfect.
Only planned change - I have acquired a 20GB 2" hard drive and plan to put that in to replace CF card - which will allow more freedom.
Of course this would not be ideal for heavy VPN use but as firewall and routing it works incredibly well - and is silent, runs cool and hardly takes any power.
Just an option…
My testing showed that the Alix is fine for up to about 80Mbit in one direction or around 50Mbit symmetric as long as all you're doing is Firewall+NAT. Any other services and the throughput plunged.
-
What makes Pfsense more flexible and powerful than all of the available open source firewalls?
Its the ability to easily add third party packages to increase security and functionality. To run most packages you need lots of memory and CPU power, if you are lacking either of the two, you may not be able to utilize all the powerful options available to the Pfsense platform.
Why would you want to limit the possible additional security and functionality that third parties have to offer Pfsense? :D
-
What makes Pfsense more flexible and powerful than all of the available open source firewalls?
Its the ability to easily add third party packages to increase security and functionality. To run most packages you need lots of memory and CPU power, if you are lacking either of the two, you may not be able to utilize all the powerful options available to the Pfsense platform.
Why would you want to limit the possible additional security and functionality that third parties have to offer Pfsense? :D
Power consumption, cost, simply don't need them. The list goes on.
-
What makes Pfsense more flexible and powerful than all of the available open source firewalls?
Its the ability to easily add third party packages to increase security and functionality. To run most packages you need lots of memory and CPU power, if you are lacking either of the two, you may not be able to utilize all the powerful options available to the Pfsense platform.
Why would you want to limit the possible additional security and functionality that third parties have to offer Pfsense? :D
Power consumption, cost, simply don't need them. The list goes on.
If that's the case, why don't you go to Best Buy …
Intellinet - Wireless Router - IEEE 802.11n $24.99
http://www.bestbuy.com/site/Intellinet+-+Wireless+Router+-+IEEE+802.11n/3999869.p?id=1218446801789&skuId=3999869 -
You've got a bit of an attitude problem. We don't need sarcasm here do please try to make your comments constructive.
In the event that that wasn't sarcasm and that you were being serious, pfSense provides far more functionality, performance, and security out of the box than any $30 "router" you'll pick up at Best Buy.
Also, not everyone here wants to have their edge network handled by a 5 year old laptop with a single NIC and vLANs. If you're a business on a tight budget then low-end but new hardware is likely a requirement for any deployment. If you're a home user then your laptop method might be ok but the requirement of only using a single NIC and vLANs adds complexity and is a security risk if not configured correctly (and I've seen a LOT of switches not properly secured.
-
You should read your own comment from Yesterday again at 12:18:54 pm…. My opinion was appropriate, but your response was belligerent!
Anyhow .... your opinion and my opinion my differ but as for businesses they look for value ... if your incapable of providing a Complete Value orientated solution, there's always a competent solution lurking in the shadows!
-
Alternate idea Clear-Pixel: http://forum.pfsense.org/index.php/topic,60336.0.html
-
Let me clear a few things up.
Pfsense is a very flexible firewall because you have the option to run a basic install which works fine for the Atom platform or even a Alix.
You also have many add on packages which can easily bring a Atom platform to its knees.
The majority of people running Pfsense are very technically inclined individuals which at some point will want to use options which are available to extend there firewall beyond a normal consumer firewall.
For an individual that just wants a cool Pfsense firewall for bragging rights, yea maybe a Atom platform is right for them. But if they want to extend there firewall they will find they have limited themselves by using the Atom platform.
For a very simple crude example using CPU Passmarks:
Total cost of platform / CPU passmarks = Cost of ProductivityThe Atom platform is the lowest productive yielding product Intel has in there product line!
It's very much like calculating the cost and efficiency of labor. Your computer is your slave, it all comes down to what you payed for your slave, and how productive it is.
If you look at the energy and materials required to produce a matx motherboard they are all very close no matter what platform. If you believe what the marketers say, than you have become fallen prey to the Marketers.
@ phreshjive looks to be one of the best prices I've seen. They should sale for based on how much work they can perform.
-
The list in the OP is good, just switch out the CPU for the G1610, as it is 22nm Ivy based and will use less power.
-
The list in the OP is good, just switch out the CPU for the G1610, as it is 22nm Ivy based and will use less power.
Yes …. very nice setup
The reason I brought up my laptop ... OP was looking to lower his cost, well its very difficult to beat the price of a quality used laptop for all the advantages it has to offer.
-
The majority of people running Pfsense are very technically inclined individuals which at some point will want to use options which are available to extend there firewall beyond a normal consumer firewall.
For an individual that just wants a cool Pfsense firewall for bragging rights, yea maybe a Atom platform is right for them. But if they want to extend there firewall they will find they have limited themselves by using the Atom platform.
For myself, I just wanted the ability to run my VPN directly on the router without a loss of bandwidth attributable to the CPU in the router in addition to enterprise-grade wireless. There isn't a single consumer-grade router that could perform the VPN aspect. Even the coveted Asus Dark Knight couldn't. A sad state of affairs indeed.