Multi WAN v2 how to use with Local Services, DNS, NTP, SYSLOG, Squid etc?

communig8

If on your LAN is allow all with multiwan gateway, i think the result is the same, right?

I'm sorry I don't understand what you mean??

jikjik101

I mean in your LAN rule, instead of having 7 rules, you can just add a single rule of allowing from any to any using the multiwan gateway.
Or do you specifically assign the dns, ping and etc to use your default gateway?

communig8

I suggest you read the aricle.

jikjik101

i read your article and it is quite amusing to read and congratulations to that.
but no offense sir, i can't understand why you need the first 6 rules in your LAN?

i am not here to argue, but i just want to learn from you. ;D
you are familiar with this stuff, and i am just starting to learn.
so i just want to know why you did this, why you didn't do that?
moving forward, thanks for your time and patience sir. ;)
i will ask no more.

communig8

I really cant explain it better than I already have done in the article.
Unless you have any specific questions.

cpy61

congratulations on the documentation, Ill try it my self will see if it works :)

Nachtfalke

@communig8

I read your article just because I was interested in and you faced some problems with NTP and RADIUS.

Perhaps this is something which could help you in your situation:
http://forum.pfsense.org/index.php/topic,60925.0.html

communig8

@Nachtfalke:

@communig8

I read your article just because I was interested in and you faced some problems with NTP and RADIUS.

Perhaps this is something which could help you in your situation:
http://forum.pfsense.org/index.php/topic,60925.0.html

@Nachtfalke what was it about that thread that you thought would help?
Richard

Nachtfalke

@communig8:

@Nachtfalke:

@communig8

I read your article just because I was interested in and you faced some problems with NTP and RADIUS.

Perhaps this is something which could help you in your situation:
http://forum.pfsense.org/index.php/topic,60925.0.html

@Nachtfalke what was it about that thread that you thought would help?
Richard

You wrote something about that RADIUS accoutning is only going through the default Gateway.
When you intercept RADIUS accounting port with NAT rules and then define an Outbound NAT rule which uses different Outgoing addresses - could this solve your issue ?

communig8

No, they are different things really.

communig8

I've added a small update to my original article concering squid/squidguard.

http://www.communig8.com/articles/64-open-source/146-pfsense-multi-wan-update