Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    VLAN Issue

    Scheduled Pinned Locked Moved
    2.1 Snapshot Feedback and Problems - RETIRED
    7
    38
    12.4k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      markuhde
      last edited by

      @timthetortoise:

      I'm not noticing that, to be honest - my rules allow LAN1 to LAN2 on the LAN1 side, but not the LAN2 side, and it works correctly (can pass traffic from LAN1 to LAN2, not vice-versa). I have no rules regarding LAN1 in LAN2, except to disallow ingress traffic on LAN2 to LAN1 (again, already established connections should not be affected). These could be completely different issues, but it's very odd nonetheless.

      Yes, also limiters are broken I forgot to note that I found that - with in/out limiters set up on my VLAN's (yes, in is masked by source IP and out by destination IP) no traffic passes whatsoever. Something is definitely seriously broken in recent builds, could it be something that is just one thing that relates to the parsing of firewall rules? Sadly, I have no way to tell when it broke since I hadn't upgraded in 60 days and when I did, I wiped the box and started over.

      1 Reply Last reply Reply Quote 0
      • E
        eri--
        last edited by

        If you refuse to provide feedback i will just mark you as a troll an lock this subject.

        Decide on your own if you want to continue and give feedback or just troll around.

        1 Reply Last reply Reply Quote 0
        • M
          markuhde
          last edited by

          @ermal:

          If you refuse to provide feedback i will just mark you as a troll an lock this subject.

          Decide on your own if you want to continue and give feedback or just troll around.

          What on earth are you talking about? I said above - given what's going on, what would be most useful? I'm happy to send you anything you need to help troubleshoot!

          1 Reply Last reply Reply Quote 0
          • M
            markuhde
            last edited by

            I seem to have got my limiters working again, it seems that was an unrelated thing (I forgot limiters have NEEDED defined schedules for quite a long time now, forgot why they do).

            What files would be useful to help determine why I'm needed extra rules to communicate between VLAN's? I'd be happy to send anything you need or provide access to the system if I'm not able to get it.

            1 Reply Last reply Reply Quote 0
            • W
              wallabybob
              last edited by

              @markuhde:

              What files would be useful to help determine why I'm needed extra rules to communicate between VLAN's? I'd be happy to send anything you need or provide access to the system if I'm not able to get it.

              Have you already provided the requested information:
              @ermal:

              Can you post your /tmp/rules.debug and screenshots of the gui(or config.xml) to see what is happening htere?

              If so, where?

              1 Reply Last reply Reply Quote 0
              • M
                markuhde
                last edited by

                No I haven't because the forum doesn't let you post files with those extensions. I'd be happy to email those files to Ermal (or other devs) though!

                Edit, I just tried posting screenshots of my rules but the forum just timed out and didn't let me post those either. Today, I'm having issues connecting to one of my WAN interfaces but that may simply be my Internet connection at work blocking it - I have a HORRIBLE Internet connection here.

                1 Reply Last reply Reply Quote 0
                • W
                  wallabybob
                  last edited by

                  @markuhde:

                  No I haven't because the forum doesn't let you post files with those extensions.

                  It won't stop you posting the contents of the requested file(s) within a reply (within a quote block or code block to distinguish the contents from commentary).

                  1 Reply Last reply Reply Quote 0
                  • M
                    markuhde
                    last edited by

                    @wallabybob:

                    @markuhde:

                    No I haven't because the forum doesn't let you post files with those extensions.

                    It won't stop you posting the contents of the requested file(s) within a reply (within a quote block or code block to distinguish the contents from commentary).

                    Good point I didn't want to flood the forum but if that's the best way to get those to you guys here they are. Also, not being able to access one of my WAN interfaces was just, as I suspected, my work blocking the IP address. So the only issue on-topic to this thread seems to be the communication between VLAN's, except, instead of being unable to block traffic I had to specifically allow it on the other interface. Here are the files Ermal requested:

                    rules.debug:

                    set limit tables 3000
set optimization aggressive
set timeout { adaptive.start 0, adaptive.end 0 }
set limit states 612000
set limit src-nodes 612000

#System aliases

loopback = "{ lo0 }"
MONTANADIGITAL = "{ em1 }"
STAFFNETWORK = "{ em0_vlan69 }"
GUESTNETWORK = "{ em0_vlan15 }"
SOUNDTECH = "{ em0_vlan763 }"
CENTURYLINK = "{ pppoe0 }"
OpenVPN = "{ openvpn }"

#SSH Lockout Table
table <sshlockout>persist
table <webconfiguratorlockout>persist
#Snort tables
table <snort2c>table <virusprot>table <bogons>persist file "/etc/bogons"
table <vpn_networks>{ 172.21.16.0/24 }
table <negate_networks>{ 172.21.16.0/24 }

# User Aliases 
table <badstuff>persist
badstuff = "<badstuff>"
blockedports = "{   31337  27374  6969  6881:6889 }"
fastbucket = "{   443  53 }"
midbucket = "{   5222:5223  5228:5230 }"
slowbucket = "{   5050  5190  1863  6665:6669  6679:6697  5631:5632  5800  6891:6901  1725  2302  3074  88  3724  6112  20:22  110  143  465  587  993  995 }"

# Gateways
GWWANGW = " route-to ( em1 72.250.187.1 ) "
GWCENTURYLINK_PPPOE = " route-to ( pppoe0 72.160.61.1 ) "
GWbothDSL = "  route-to { ( em1 72.250.187.1 ) ( pppoe0 72.160.61.1 )  }  round-robin  "
GWCenturyLinkPreferred = "  route-to { ( pppoe0 72.160.61.1 )  }  "

set loginterface em0_vlan69

set skip on pfsync0

scrub on $MONTANADIGITAL all    fragment reassemble
scrub on $STAFFNETWORK all    fragment reassemble
scrub on $GUESTNETWORK all    fragment reassemble
scrub on $SOUNDTECH all    fragment reassemble
scrub on $CENTURYLINK all    fragment reassemble

no nat proto carp
no rdr proto carp
nat-anchor "natearly/*"
nat-anchor "natrules/*"

# Outbound NAT rules

# Subnets to NAT 
tonatsubnets	= "{ 172.21.12.0/22 172.16.16.0/22 192.168.41.0/24 172.21.16.0/24 127.0.0.0/8 0.0.0.0  }"
nat on $MONTANADIGITAL  from $tonatsubnets port 500 to any port 500 -> 72.250.187.21/32 port 500  
nat on $MONTANADIGITAL  from $tonatsubnets to any -> 72.250.187.21/32 port 1024:65535  

nat on $CENTURYLINK  from $tonatsubnets port 500 to any port 500 -> 72.160.61.87/32 port 500  
nat on $CENTURYLINK  from $tonatsubnets to any -> 72.160.61.87/32 port 1024:65535  

# Load balancing anchor
rdr-anchor "relayd/*"
# TFTP proxy
rdr-anchor "tftp-proxy/*"
# NAT Inbound Redirects
rdr on em1 proto tcp from any to 72.250.187.21 port 8034 -> 172.21.12.34 port 80

# Setup Squid proxy redirect
no rdr on em0_vlan15 proto tcp from any to { 192.168.0.0/16, 172.16.0.0/12, 10.0.0.0/8 } port 80
no rdr on em0_vlan15 proto tcp from any to { 172.21.12.0/22, 172.16.16.0/22, 192.168.41.0/24 } port 80
rdr on em0_vlan15 proto tcp from any to !(em0_vlan15) port 80 -> 127.0.0.1 port 3128

# UPnPd rdr anchor
rdr-anchor "miniupnpd"

anchor "relayd/*"
anchor "openvpn/*"
anchor "ipsec/*"
# Block all IPv6
block in log quick inet6 all label "Block all IPv6"
block out log quick inet6 all label "Block all IPv6"
#---------------------------------------------------------------------------
# default deny rules
#---------------------------------------------------------------------------
block in log inet all label "Default deny rule IPv4"
block out log inet all label "Default deny rule IPv4"
block in log inet6 all label "Default deny rule IPv6"
block out log inet6 all label "Default deny rule IPv6"

# IPv6 ICMP is not auxilary, it is required for operation
# See man icmp6(4)
# 1    unreach         Destination unreachable
# 2    toobig          Packet too big
# 128  echoreq         Echo service request
# 129  echorep         Echo service reply
# 133  routersol       Router solicitation
# 134  routeradv       Router advertisement
# 135  neighbrsol      Neighbor solicitation
# 136  neighbradv      Neighbor advertisement
pass quick inet6 proto ipv6-icmp from any to any icmp6-type {1,2,135,136} keep state

# Allow only bare essential icmpv6 packets (NS, NA, and RA, echoreq, echorep)
pass out quick inet6 proto ipv6-icmp from fe80::/10 to fe80::/10 icmp6-type {129,133,134,135,136} keep state
pass out quick inet6 proto ipv6-icmp from fe80::/10 to ff02::/16 icmp6-type {129,133,134,135,136} keep state
pass in quick inet6 proto ipv6-icmp from fe80::/10 to fe80::/10 icmp6-type {128,133,134,135,136} keep state
pass in quick inet6 proto ipv6-icmp from ff02::/16 to fe80::/10 icmp6-type {128,133,134,135,136} keep state
pass in quick inet6 proto ipv6-icmp from fe80::/10 to ff02::/16 icmp6-type {128,133,134,135,136} keep state

# We use the mighty pf, we cannot be fooled.
block quick inet proto { tcp, udp } from any port = 0 to any
block quick inet proto { tcp, udp } from any to any port = 0
block quick inet6 proto { tcp, udp } from any port = 0 to any
block quick inet6 proto { tcp, udp } from any to any port = 0

# Snort package
block quick from <snort2c>to any label "Block snort2c hosts"
block quick from any to <snort2c>label "Block snort2c hosts"

# SSH lockout
block in log quick proto tcp from <sshlockout>to any port 22 label "sshlockout"

# webConfigurator lockout
block in log quick proto tcp from <webconfiguratorlockout>to any port 443 label "webConfiguratorlockout"
block in quick from <virusprot>to any label "virusprot overload table"
antispoof for em1
antispoof for em0_vlan69
# allow access to DHCP server on STAFFNETWORK
pass in quick on $STAFFNETWORK proto udp from any port = 68 to 255.255.255.255 port = 67 label "allow access to DHCP server"
pass in quick on $STAFFNETWORK proto udp from any port = 68 to 172.21.12.1 port = 67 label "allow access to DHCP server"
pass out quick on $STAFFNETWORK proto udp from 172.21.12.1 port = 67 to any port = 68 label "allow access to DHCP server"
antispoof for em0_vlan15
# allow access to DHCP server on GUESTNETWORK
pass in quick on $GUESTNETWORK proto udp from any port = 68 to 255.255.255.255 port = 67 label "allow access to DHCP server"
pass in quick on $GUESTNETWORK proto udp from any port = 68 to 172.16.16.1 port = 67 label "allow access to DHCP server"
pass out quick on $GUESTNETWORK proto udp from 172.16.16.1 port = 67 to any port = 68 label "allow access to DHCP server"
antispoof for em0_vlan763
# allow access to DHCP server on SOUNDTECH
pass in quick on $SOUNDTECH proto udp from any port = 68 to 255.255.255.255 port = 67 label "allow access to DHCP server"
pass in quick on $SOUNDTECH proto udp from any port = 68 to 192.168.41.1 port = 67 label "allow access to DHCP server"
pass out quick on $SOUNDTECH proto udp from 192.168.41.1 port = 67 to any port = 68 label "allow access to DHCP server"
antispoof for pppoe0

# loopback
pass in on $loopback inet all label "pass IPv4 loopback"
pass out on $loopback inet all label "pass IPv4 loopback"
pass in on $loopback inet6 all label "pass IPv6 loopback"
pass out on $loopback inet6 all label "pass IPv6 loopback"
# let out anything from the firewall host itself and decrypted IPsec traffic
pass out inet all keep state allow-opts label "let out anything IPv4 from firewall host itself"
pass out inet6 all keep state allow-opts label "let out anything IPv6 from firewall host itself"
pass out route-to ( em1 72.250.187.1 ) from 72.250.187.21 to !72.250.187.0/24 keep state allow-opts label "let out anything from firewall host itself"
pass out route-to ( pppoe0 72.160.61.1 ) from 72.160.61.87 to !72.160.61.87/32 keep state allow-opts label "let out anything from firewall host itself"
# make sure the user cannot lock himself out of the webConfigurator or SSH
pass in quick on em0_vlan69 proto tcp from any to (em0_vlan69) port { 443 80 22 } keep state label "anti-lockout rule"

# User-defined rules follow

anchor "userrules/*"
pass  in  quick  on $OpenVPN  from any to any keep state  label "USER_RULE: OpenVPN Tech Remotes wizard"
pass  in  quick  on $MONTANADIGITAL reply-to ( em1 72.250.187.1 ) inet proto tcp  from any to any port 443 flags S/SA keep state  label "USER_RULE"
pass  in  quick  on $MONTANADIGITAL reply-to ( em1 72.250.187.1 ) inet proto tcp  from any to any port 22 flags S/SA keep state  label "USER_RULE"
pass  in  quick  on $MONTANADIGITAL reply-to ( em1 72.250.187.1 ) inet proto { tcp udp }  from any to any port 1723 keep state  label "USER_RULE"
pass  in  quick  on $MONTANADIGITAL reply-to ( em1 72.250.187.1 )  proto udp  from any to 72.250.187.21 port 1194 keep state  label "USER_RULE: OpenVPN Tech Remotes wizard"
block  in  quick  on $STAFFNETWORK inet proto { tcp udp }  from any to any port $blockedports  label "USER_RULE"
pass  in  quick  on $STAFFNETWORK inet proto { tcp udp }  from any  to <negate_networks>keep state  dnpipe ( 1,2)  label "NEGATE_ROUTE: Negate policy routing for destination"
pass  in  quick  on $STAFFNETWORK  $GWbothDSL inet proto { tcp udp }  from any to any port $fastbucket keep state  dnpipe ( 1,2)  label "USER_RULE"
pass  in  quick  on $STAFFNETWORK inet proto { tcp udp }  from any  to <negate_networks>keep state  dnpipe ( 3,4)  label "NEGATE_ROUTE: Negate policy routing for destination"
pass  in  quick  on $STAFFNETWORK  $GWbothDSL inet proto { tcp udp }  from any to any port $midbucket keep state  dnpipe ( 3,4)  label "USER_RULE"
pass  in  quick  on $STAFFNETWORK inet proto { tcp udp }  from any  to <negate_networks>keep state  dnpipe ( 5,6)  label "NEGATE_ROUTE: Negate policy routing for destination"
pass  in  quick  on $STAFFNETWORK  $GWCenturyLinkPreferred inet proto { tcp udp }  from any to any port $slowbucket keep state  dnpipe ( 5,6)  label "USER_RULE"
pass  in  quick  on $STAFFNETWORK inet from 172.21.12.0/22  to <negate_networks>keep state  dnpipe ( 1,2)  label "NEGATE_ROUTE: Negate policy routing for destination"
pass  in  quick  on $STAFFNETWORK  $GWbothDSL inet from 172.21.12.0/22 to any keep state  dnpipe ( 1,2)  label "USER_RULE: Default allow LAN to any rule"
pass  in  quick  on $STAFFNETWORK  $GWbothDSL inet from any to 172.21.12.0/22 keep state  label "USER_RULE: allow any to staff network"
pass  in  quick  on $GUESTNETWORK inet proto { tcp udp }  from any to 172.21.12.0/22 keep state  label "USER_RULE"
pass  in  quick  on $GUESTNETWORK inet proto { tcp udp }  from any to 172.16.16.1/22 keep state  label "USER_RULE"
pass  in  quick  on $GUESTNETWORK inet proto { tcp udp }  from any  to <negate_networks>keep state  dnpipe ( 3,4)  label "NEGATE_ROUTE: Negate policy routing for destination"
pass  in  quick  on $GUESTNETWORK  $GWbothDSL inet proto { tcp udp }  from any to any port $fastbucket keep state  dnpipe ( 3,4)  label "USER_RULE"
pass  in  quick  on $GUESTNETWORK inet proto { tcp udp }  from any  to <negate_networks>keep state  dnpipe ( 5,6)  label "NEGATE_ROUTE: Negate policy routing for destination"
pass  in  quick  on $GUESTNETWORK  $GWbothDSL inet proto { tcp udp }  from any to any port $midbucket keep state  dnpipe ( 5,6)  label "USER_RULE"
pass  in  quick  on $GUESTNETWORK inet proto { tcp udp }  from any  to <negate_networks>keep state  dnpipe ( 7,8)  label "NEGATE_ROUTE: Negate policy routing for destination"
pass  in  quick  on $GUESTNETWORK  $GWCenturyLinkPreferred inet proto { tcp udp }  from any to any port $slowbucket keep state  dnpipe ( 7,8)  label "USER_RULE"
pass  in  quick  on $SOUNDTECH inet proto tcp  from any to 172.21.12.0/22 flags S/SA keep state  label "USER_RULE"
pass  in  quick  on $SOUNDTECH inet proto { tcp udp }  from any to 192.168.41.1/24 keep state  label "USER_RULE"
pass  in  quick  on $SOUNDTECH inet proto { tcp udp }  from any to any keep state  dnpipe ( 1,2)  label "USER_RULE"
pass  in  quick  on $CENTURYLINK reply-to ( pppoe0 72.160.61.1 ) inet proto tcp  from any to any port 22 flags S/SA keep state  label "USER_RULE"
pass  in  quick  on $CENTURYLINK reply-to ( pppoe0 72.160.61.1 ) inet proto tcp  from any to any port 443 flags S/SA keep state  label "USER_RULE"
pass  in  quick  on $CENTURYLINK reply-to ( pppoe0 72.160.61.1 ) inet proto { tcp udp }  from any to any port 1723 keep state  label "USER_RULE"

# Automatic Pass rules for any delegated IPv6 prefixes through dynamic IPv6 clients

# VPN Rules
anchor "tftp-proxy/*"

# Setup squid pass rules for proxy
pass in quick on em0_vlan15 proto tcp from any to !(em0_vlan15) port 80 flags S/SA keep state
pass in quick on em0_vlan15 proto tcp from any to !(em0_vlan15) port 3128 flags S/SA keep state</negate_networks></negate_networks></negate_networks></negate_networks></negate_networks></negate_networks></negate_networks></virusprot></webconfiguratorlockout></sshlockout></snort2c></snort2c></badstuff></badstuff></negate_networks></vpn_networks></bogons></virusprot></snort2c></webconfiguratorlockout></sshlockout>

                    (I'm at the size limit I guess my post got cut short so I'll post config.xml in the next post)

                    1 Reply Last reply Reply Quote 0
                    • E
                      eri--
                      last edited by

                      Use sites like pastie.org etc for posting text data

                      1 Reply Last reply Reply Quote 0
                      • M
                        markuhde
                        last edited by

                        @ermal:

                        Use sites like pastie.org etc for posting text data

                        I tried that and config.xml was over their 64 K limit but here's a link to it as a document on Google Drive. Hopefully this is helpful:

                        https://docs.google.com/document/d/13gilNZkUWH0sBi39visLSX4QUC5PlzmdF7-vraIwa6k/edit?usp=sharing

                        1 Reply Last reply Reply Quote 0
                        • T
                          timthetortoise
                          last edited by

                          Could someone post their netstat -rn output on a box with a working OpenVPN config?

                          Edit: nevermind, found out one of my switches' configs got changed by someone who doesn't like to inform other people why they're doing stupid stuff, so my route was gone. I am not having the VPN/firewall issue.

                          1 Reply Last reply Reply Quote 0
                          • M
                            markuhde
                            last edited by

                            @timthetortoise:

                            Could someone post their netstat -rn output on a box with a working OpenVPN config?

                            Edit: nevermind, found out one of my switches' configs got changed by someone who doesn't like to inform other people why they're doing stupid stuff, so my route was gone. I am not having the VPN/firewall issue.

                            That's great, I'm wondering if my issue has to do with the cheap MicroTik switch the firewall is connected to. I was successfully talking from OpenVPN to LAN and now it's quit working again. Here is my netstat -rn if it's useful:

                            [2.1-BETA1][admin@glacierfire.glaciercamp]/root(1): netstat -rn
Routing tables

Internet:
Destination        Gateway            Flags    Refs      Use  Netif Expire
default            72.250.187.1       UGS         0   684815    em1
72.160.38.1        link#11            UH          0    54778 pppoe0
72.160.38.69       link#11            UHS         0        0    lo0
72.250.187.0/24    link#3             U           0   113694    em1
72.250.187.21      link#3             UHS         0        0    lo0
127.0.0.1          link#6             UH          0     1363    lo0
172.16.16.0/22     link#9             U           0  1520856 em0_vl
172.16.16.1        link#9             UHS         0        0    lo0
172.21.12.0/22     link#8             U           0   311550 em0_vl
172.21.12.1        link#8             UHS         0        0    lo0
172.21.16.0/24     172.21.16.2        UGS         0    15315 ovpns1
172.21.16.1        link#12            UHS         0        0    lo0
172.21.16.2        link#12            UH          0        0 ovpns1
192.168.41.0/24    link#10            U           0       33 em0_vl
192.168.41.1       link#10            UHS         0        0    lo0

Internet6:
Destination                       Gateway                       Flags      Netif Expire
::1                               ::1                           UH          lo0
fe80::%re0/64                     link#1                        U           re0
fe80::d227:88ff:feba:d2e%re0      link#1                        UHS         lo0
fe80::%em0/64                     link#2                        U           em0
fe80::204:23ff:feac:cf84%em0      link#2                        UHS         lo0
fe80::%em1/64                     link#3                        U           em1
fe80::204:23ff:feac:cf85%em1      link#3                        UHS         lo0
fe80::%lo0/64                     link#6                        U           lo0
fe80::1%lo0                       link#6                        UHS         lo0
fe80::%em0_vlan69/64              link#8                        U      em0_vlan
fe80::d227:88ff:feba:d2e%em0_vlan69 link#8                        UHS         lo0
fe80::%em0_vlan15/64              link#9                        U      em0_vlan
fe80::d227:88ff:feba:d2e%em0_vlan15 link#9                        UHS         lo0
fe80::%em0_vlan763/64             link#10                       U      em0_vlan
fe80::d227:88ff:feba:d2e%em0_vlan763 link#10                       UHS         lo0
fe80::%pppoe0/64                  link#11                       U        pppoe0
fe80::d227:88ff:feba:d2e%pppoe0   link#11                       UHS         lo0
fe80::%ovpns1/64                  link#12                       U        ovpns1
fe80::d227:88ff:feba:d2e%ovpns1   link#12                       UHS         lo0
ff01::%re0/32                     fe80::d227:88ff:feba:d2e%re0  U           re0
ff01::%em0/32                     fe80::204:23ff:feac:cf84%em0  U           em0
ff01::%em1/32                     fe80::204:23ff:feac:cf85%em1  U           em1
ff01::%lo0/32                     ::1                           U           lo0
ff01::%em0_vlan69/32              fe80::d227:88ff:feba:d2e%em0_vlan69 U      em0_vlan
ff01::%em0_vlan15/32              fe80::d227:88ff:feba:d2e%em0_vlan15 U      em0_vlan
ff01::%em0_vlan763/32             fe80::d227:88ff:feba:d2e%em0_vlan763 U      em0_vlan
ff01::%pppoe0/32                  fe80::d227:88ff:feba:d2e%pppoe0 U        pppoe0
ff01::%ovpns1/32                  fe80::d227:88ff:feba:d2e%ovpns1 U        ovpns1
ff02::%re0/32                     fe80::d227:88ff:feba:d2e%re0  U           re0
ff02::%em0/32                     fe80::204:23ff:feac:cf84%em0  U           em0
ff02::%em1/32                     fe80::204:23ff:feac:cf85%em1  U           em1
ff02::%lo0/32                     ::1                           U           lo0
ff02::%em0_vlan69/32              fe80::d227:88ff:feba:d2e%em0_vlan69 U      em0_vlan
ff02::%em0_vlan15/32              fe80::d227:88ff:feba:d2e%em0_vlan15 U      em0_vlan
ff02::%em0_vlan763/32             fe80::d227:88ff:feba:d2e%em0_vlan763 U      em0_vlan
ff02::%pppoe0/32                  fe80::d227:88ff:feba:d2e%pppoe0 U        pppoe0
ff02::%ovpns1/32                  fe80::d227:88ff:feba:d2e%ovpns1 U        ovpns1
                            1 Reply Last reply Reply Quote 0
                            • T
                              timthetortoise
                              last edited by

                              Can you run wireshark or tcpdump on the machine you're trying to get traffic to to verify that it's not getting through? Or do you know for a fact that none of the traffic is touching it?

                              1 Reply Last reply Reply Quote 0
                              • M
                                markuhde
                                last edited by

                                @timthetortoise:

                                Can you run wireshark or tcpdump on the machine you're trying to get traffic to to verify that it's not getting through? Or do you know for a fact that none of the traffic is touching it?

                                Sadly I can't, since every "machine" on the network on a regular basis I control is a Wi-Fi AP or a small smart switch. I could, next time I'm on site, put a machine on it running wireshark and attempt to VPN in from my iPad… there's an OVPN iPad client now. I'll do that next time I'm on site if I get a chance to.

                                1 Reply Last reply Reply Quote 0
                                • T
                                  timthetortoise
                                  last edited by

                                  I honestly can't find anything wrong with your firewall or routing tables. Could you post a simplified version of your topology when you get a chance? If you have an intermediary L3 device, I'm thinking your issue may be similar to what was going on with me, but I don't believe at this point that it's pf's fault.

                                  1 Reply Last reply Reply Quote 0
                                  • M
                                    markuhde
                                    last edited by

                                    Okay here's the basic text description:

                                    WAN 1 is Montana Digital (mtdig.net) 72.250.187.21
                                    WAN 2 is CenturyLink PPPoE
                                    both feed into pfSense
                                    Local side of pfSense is one port - three VLAN's. VLAN 69 - 172.21.12.1/22, VLAN 15 - 172.16.16.1/22, VLAN 763 - 192.168.41.1/24

                                    This feeds a MikroTik RB 250/GS 5-port switch.
                                    One of these ports feeds a Raspberry Pi (and is a VLAN 69 access port) for RADIUS
                                    The rest are trunk ports of which two are used (one free port):
                                    One feeds a Trendnet PoE 8-port switch which feeds an EnGenius ENH-200, a Trendnet TEW-653AP and a Buffalo WHR-HP-G300N

                                    One feeds another building which has a small 8-port ASUS Gigabit Unmanaged Switch which in turn feeds:
                                    A EnGenius EAP-600
                                    A Buffalo WHR-HP-G300N
                                    An EnGenius ENH-202
                                    An Ubiquiti Nanostation M5 in WDS-AP mode

                                    The Nanostation M5 has three clients in WDS-STA mode, which feed:

                                    Nanostation Loco M5 #1:
                                    Another ASUS unmanaged switch connected to:
                                    EnGenius ENH-202
                                    EnGenius ENH-500
                                    EnGenius EAP-300

                                    Nanostation Loco M5 #2:
                                    Another MikroTik RB/250GS feeding:
                                    Trunk: Trendnet PoE switch connected to an EnGenius EAP600 (more devices to come, LOL)
                                    Access 763: Audio DSP (forgot the make/model)
                                    Access 763: Buffalo WHR-HP-G300N

                                    Nanostation Loco M5 #3:
                                    Buffalo WHR-HP-G300N

                                    All except the AP for the sound techs are on receiving all VLAN's and set to management on VLAN 69. This has all worked very well historically, I reinstalled pfSense and upgraded from a snap several months old when I needed to add a new NIC to support the second  WAN connection. (which itself is a pain, I didn't know Squid didn't load balance so I'm trying to learn how to do that, but that's unrelated obviously)

                                    1 Reply Last reply Reply Quote 0
                                    • T
                                      timthetortoise
                                      last edited by

                                      No intermediary L3 devices, can't get traffic that originates on the VPN side through, I'm stumped. Unless your default gateway is wrong on your machines (I'm assuming it's the pfSense IP for each respective VLAN), I can't find a reason your configuration isn't working without knowing your network/config more in-depth. Good luck with it!

                                      1 Reply Last reply Reply Quote 0
                                      • M
                                        markuhde
                                        last edited by

                                        @timthetortoise:

                                        No intermediary L3 devices, can't get traffic that originates on the VPN side through, I'm stumped. Unless your default gateway is wrong on your machines (I'm assuming it's the pfSense IP for each respective VLAN), I can't find a reason your configuration isn't working without knowing your network/config more in-depth. Good luck with it!

                                        Default gateway is the pfSense IP for VLAN_69 on everything. I think I've tracked down the problem as an OpenVPN issue though more than a firewall issue. All that testing was with the OpenVPN client for Windows which had been working and suddenly stopped with no config changes (couldn't get traffic to anything). I just installed the client for iPad and for Android. Lots of random disconnects, especially on the Android version, but both 95% work - definitely enough to be usable for my purposes. I changed NOTHING on the Windows client from when it was working though. I sure wish the OpenVPN setup on pfSense worked with Fedora (it doesn't even let you try because there's no certificate password).

                                        So, it seems the only issue I'm having that's actually possibly VLAN caused (I still need to figure out load balancing Squid but that's obviously a topic for another thread) is need for the seemingly redundant allow from any rule on the LAN side (since as said, established states should just be allowed).

                                        Thanks for the good wishes on sorting this out :) I really am trying to be as useful as I can be with this.

                                        1 Reply Last reply Reply Quote 0
                                        • M
                                          mikeisfly
                                          last edited by

                                          Can you make a network diagram? gliffy.com . Are you seeing the mac address of the default gateways on the various subnets? (arp -a in windows will show you your arp table) Not sure how to do it in FreeBSD. I'm thinking that you might have a switching loop on your network. Also are your trunk ports tagged vlan ports. Are you sending tagged traffic to a end device? Most computers and access points will drop tagged traffic unless they are configured to deal with the extra 4 bytes. I like a puzzle, looking forward to seeing your diagram.

                                          1 Reply Last reply Reply Quote 0
                                          • M
                                            markuhde
                                            last edited by

                                            @mikeisfly:

                                            Can you make a network diagram? gliffy.com . Are you seeing the mac address of the default gateways on the various subnets? (arp -a in windows will show you your arp table) Not sure how to do it in FreeBSD. I'm thinking that you might have a switching loop on your network. Also are your trunk ports tagged vlan ports. Are you sending tagged traffic to a end device? Most computers and access points will drop tagged traffic unless they are configured to deal with the extra 4 bytes. I like a puzzle, looking forward to seeing your diagram.

                                            I'm adding a few AP's and a couple more little MikroTik switches to create access ports NEXT weekend but as of today, here's how it looks:

                                            http://www.gliffy.com/go/publish/4535154/

                                            The access points are configured to deal with tagged traffic as we run separate SSID's on each VLAN. Nobody is plugging into a trunk port directly (nobody gets to come in and plug into ANY port anymore for that matter since the switches that accomplished that broke)

                                            P.S. As I noted this same basic setup used to work perfectly fine without any "extra" rules. Thanks a ton for your help! It seems to be mostly working now, I think all my OpenVPN issues are actually my internet connection where I live.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.