Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Watchguard XTM 5 Series

    Hardware
    129
    1.1k
    1.1m
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S
      stephenw10 Netgate Administrator
      last edited by

      Indeed, though I'm running it 32bit. It would be interesting to see whether there's much advantage to running 64bit. There are plenty of reports that it makes almost no difference.
      I haven't tried your new driver yet but thanks for doing it  :). Still trying to make EIST function correctly. It doesn't help that the SuperIO is not compatible with mbmon so I can't read the core voltage directly.

      Steve

      1 Reply Last reply Reply Quote 0
      • B
        Brak
        last edited by

        I'd love to get the lcdproc-dev and SDECLCD driver working on 64bit. Does that require a whole driver rewrite or a recompile? I'm not even sure if lcdproc-dev is amd64 capable…

        1 Reply Last reply Reply Quote 0
        • stephenw10S
          stephenw10 Netgate Administrator
          last edited by

          I think I'm losing my mind over EIST.  ::)
          I have eventually come to the conclusion that EIST is in fact working with my modified bios and loading a custom DSDT.

          [2.0.1-RELEASE][root@pfSense.localdomain]/root(1): sysctl dev.cpu
dev.cpu.0.%desc: ACPI CPU
dev.cpu.0.%driver: cpu
dev.cpu.0.%location: handle=\_PR_.CPU0
dev.cpu.0.%pnpinfo: _HID=none _UID=0
dev.cpu.0.%parent: acpi0
dev.cpu.0.temperature: 25.0C
dev.cpu.0.cx_supported: C1/1 C2/96
dev.cpu.0.cx_lowest: C1
dev.cpu.0.cx_usage: 100.00% 0.00% last 5000us
dev.cpu.0.freq: 1200
dev.cpu.0.freq_levels: 2200/65000 2000/55000 1800/50000 1600/45000 1400/40000 1200/30000
dev.cpu.1.%desc: ACPI CPU
dev.cpu.1.%driver: cpu
dev.cpu.1.%location: handle=\_PR_.CPU1
dev.cpu.1.%pnpinfo: _HID=none _UID=0
dev.cpu.1.%parent: acpi0
dev.cpu.1.temperature: 25.0C
dev.cpu.1.cx_supported: C1/1 C2/96
dev.cpu.1.cx_lowest: C1
dev.cpu.1.cx_usage: 100.00% 0.00% last 5000us

          If I read the MSRs directly from the CPU using cpucontrol I can see that the multiplier and VID are set as requested by the DSDT.

          [2.0.1-RELEASE][root@pfSense.localdomain]/root(3): cpucontrol -m 198 /dev/cpuctl0
MSR 0x198: 0x0b280b28 0x0600061d

          As well as that I can see the core voltage is reduced by reading the SuperIO chip registers directly.

          At 1200 V-Core is at register 20\. 

idx 00 01 02 03 04 05 06 07  08 09 0a 0b 0c 0d 0e 0f  10 11 12 13 14 15 16 17  18 19 1a 1b 1c 1d 1e 1f  20 21 22 23 24 25 26 27  28 29 2b 2c 2d 2e 2f 30  31 32 33 34 35 36 37 38  39 3a 3b 3c 3d 3e 3f 40  41 42 43 44 45 46 47 48  49 4a 4b 4c 4d 4e 4f
val 01 78 01 ff 04 37 00 01  78 01 50 01 3c 3c 01 05  01 ff 20 00 00 01 01 3c  43 00 ff ff 24 32 00 e3  64 c8 25 ba d0 80 00 26  1f ff f0 00 de 5f 9d b4  04 0a 54 7c 5a 08 26 28  a4 15 3d 20 12 00 00 03  9c 00 fe ff 00 00 af 2d  03 01 84 18 95 80 5c
def RR ff RR ff 00 00 00 00  01 01 01 01 3c 3c 0a 0a  RR ff 00 00 00 01 01 3c  43 RR ff ff RR RR NA NA  NA NA NA NA NA RR RR NA  NA NA NA NA NA NA NA NA  NA NA NA NA RR RR RR RR  NA NA NA NA NA RR RR 03  00 00 fe ff RR RR 5f NA  03 RR 44 18 15 80 5c

At 2200

idx 00 01 02 03 04 05 06 07  08 09 0a 0b 0c 0d 0e 0f  10 11 12 13 14 15 16 17  18 19 1a 1b 1c 1d 1e 1f  20 21 22 23 24 25 26 27  28 29 2b 2c 2d 2e 2f 30  31 32 33 34 35 36 37 38  39 3a 3b 3c 3d 3e 3f 40  41 42 43 44 45 46 47 48  49 4a 4b 4c 4d 4e 4f
val 01 78 01 ff 04 37 00 01  78 01 50 01 3c 3c 01 05  01 ff 20 00 00 01 01 3c  43 00 ff ff 24 32 00 e1  64 c8 26 ba d0 80 00 26  1f ff f0 00 de 5f 9d b4  04 0a 54 7c 5a 08 26 28  a4 15 3d 20 12 00 00 03  00 00 fe ff 00 00 af 2d  03 01 84 18 95 06 a3
def RR ff RR ff 00 00 00 00  01 01 01 01 3c 3c 0a 0a  RR ff 00 00 00 01 01 3c  43 RR ff ff RR RR NA NA  NA NA NA NA NA RR RR NA  NA NA NA NA NA NA NA NA  NA NA NA NA RR RR RR RR  NA NA NA NA NA RR RR 03  00 00 fe ff RR RR 5f NA  03 RR 44 18 15 80 5c

VID is 0x1D is 29  Voltage is VIDx12.5 + 825 = 1187.5

Vcore reading is 0x64 is 100: 100x4.8 + 690 = 1170     Seems pretty close!

          However it is almost impossible to see any effect because the CPU supports C1/E state which is already as low power if not lower. In fact I believe that EIST will only operate in C0 anyway. It will probably reduce the total power consumption when the box is under a moderate load since it can only enter C1 when the CPU is idle for a time.
          Unfortunately the minimum core voltage either for C1/E or the lowest EIST P-state is VID=1D (decimal 29) which is 1.19V. I'm not sure if that's just because my CPU is bad quality or that's a MB limitation. The full speed core voltage is 1.325V but the spec is down to 0.85V  :-\ (or 0.962 depending where you look)
          It doesn't seem to support SLFM (Dymnamic FSB) either, or at least I can't seem to trigger it, which would otherwise enable a lower core voltage.
          You might think that reducing the CPU frequency would have a measurable effect on the power draw.  :-
          Disappointing in some ways since using EIST on the Core-E box reduced the power consumption and CPU temps quite a bit.

          I've been staring at register values in hex for so long now I'm starting to dream about it!  ;)

          If you want to know about EIST and such just read this:
          http://www.projectosx.com/forum/index.php?showtopic=610
          It has almost all the information I found on many other sites in one article.  :)

          Steve

          1 Reply Last reply Reply Quote 0
          • F
            fmertz
            last edited by

            @Brak:

            I'd love to get the lcdproc-dev and SDECLCD driver working on 64bit. Does that require a whole driver rewrite or a recompile? I'm not even sure if lcdproc-dev is amd64 capable…

            amd64 is one of the supported architectures for lcdproc as a project, so I would not expect problems there. The sdec driver, though, has never been compiled, much less run, in that arch. If/when someone manages to run a 64bit OS on this box, I'll be happy to provide a binary for testing. Just need to download/install a 64bit FreeBSD virtual machine, and recompile.

            1 Reply Last reply Reply Quote 0
            • B
              Brak
              last edited by

              @fmertz:

              @Brak:

              I'd love to get the lcdproc-dev and SDECLCD driver working on 64bit. Does that require a whole driver rewrite or a recompile? I'm not even sure if lcdproc-dev is amd64 capable…

              amd64 is one of the supported architectures for lcdproc as a project, so I would not expect problems there. The sdec driver, though, has never been compiled, much less run, in that arch. If/when someone manages to run a 64bit OS on this box, I'll be happy to provide a binary for testing. Just need to download/install a 64bit FreeBSD virtual machine, and recompile.

              I have hardware from Watchguards OEM (Lanner calls it thier LCM) that uses the same screen and is 64bit. I'd be more than willing to try out any binaries you need tested. Only differences is that the screen on my units are 20x2 and not 16x2. I'm sure that really isn't an issue tho. Currently the 32bit SDECLCD works fine, except the screens don't seem to use the full 20x2, although the "Next|Prev" popups show in the extra characters so they work.

              Let me know what you need done/tested. I assume what works for me will work perfectly on stephen's unit.

              1 Reply Last reply Reply Quote 0
              • F
                fmertz
                last edited by

                @Brak:

                Let me know what you need done/tested.

                If you have a 64bit version of FreeBSD running, make sure you have a 64bit version of the lcdproc package. The catch is that with a 32 bit compatibility layer, 32bit packages run fine on 64bit systems. You can find out with the file command on the LCDd executable: "file LCDd"

                Once this is running, you can get the 64bit driver from here (rename it to sdeclcd.so):

                https://github.com/downloads/fmertz/sdeclcd/sdeclcd64.so

                This file is the sdeclcd driver code as accepted upstream, compiled under FreeBSD 8.3 AMD64. No LED, or XTM code in this just yet.

                Keep us posted.

                1 Reply Last reply Reply Quote 0
                • stephenw10S
                  stephenw10 Netgate Administrator
                  last edited by

                  While re-reading this I realised I never posted the bios version in my box.
                  The original bios shows in the POST as:

                  MB-7580 Ver.WC0 02/03/2010

                  When it boots it shows on the LCD:

                  WG BIOS V1.2

                  This version of the bios code does not set the arm/disarm LED to red during boot as it should. It requires some additional values to be added to the bootblock SIO table which I have not found a way to do (that doesn't corrupt the bios).

                  If you have a more recent version please let me know.

                  Steve

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    As requested here's the output of some commands. This is from 2.1Beta on my XTM5.

                    [2.1-BETA1][root@pfsense.localdomain]/root(2): sysctl hw
hw.machine: i386
hw.model: Intel(R) Core(TM)2 Duo CPU     E4500  @ 2.20GHz
hw.ncpu: 2
hw.byteorder: 1234
hw.physmem: 1016168448
hw.usermem: 911572992
hw.pagesize: 4096
hw.floatingpoint: 1
hw.machine_arch: i386
hw.realmem: 1037697024
hw.amr.force_sg32: 0
hw.an.an_cache_iponly: 1
hw.an.an_cache_mcastonly: 0
hw.an.an_cache_mode: dbm
hw.an.an_dump: off
hw.ata.setmax: 0
hw.ata.wc: 0
hw.ata.atapi_dma: 0
hw.ata.ata_dma_check_80pin: 1
hw.ata.ata_dma: 0
hw.ath.bstuck: 4
hw.ath.txbuf: 200
hw.ath.rxbuf: 40
hw.ath.anical: 100
hw.ath.resetcal: 1200
hw.ath.shortcal: 100
hw.ath.longcal: 30
hw.bce.rx_ticks: 18
hw.bce.rx_ticks_int: 18
hw.bce.rx_quick_cons_trip: 6
hw.bce.rx_quick_cons_trip_int: 6
hw.bce.tx_ticks: 80
hw.bce.tx_ticks_int: 80
hw.bce.tx_quick_cons_trip: 20
hw.bce.tx_quick_cons_trip_int: 20
hw.bce.loose_rx_mtu: 0
hw.bce.hdr_split: 1
hw.bce.tx_pages: 2
hw.bce.rx_pages: 2
hw.bce.msi_enable: 1
hw.bce.tso_enable: 1
hw.bce.verbose: 1
hw.bge.allow_asf: 0
hw.bt848.slow_msp_audio: -1
hw.bt848.format: -1
hw.bt848.reverse_mute: -1
hw.bt848.tuner: -1
hw.bt848.card: -1
hw.bwn.wme: 1
hw.bwn.usedma: 1
hw.bwn.hwpctl: 0
hw.bwn.bluetooth: 1
hw.bwn.bfp: 0
hw.cardbus.cis_debug: 0
hw.cardbus.debug: 0
hw.cxgb.nfilters: -1
hw.cxgb.use_16k_clusters: -1
hw.cxgb.force_fw_update: 0
hw.cxgb.multiq: 1
hw.cxgb.ofld_disable: 0
hw.cxgb.msi_allowed: 2
hw.cxgb.tx_reclaim_threshold: 32
hw.cxgb.tx_coalesce_enable_stop: 256
hw.cxgb.tx_coalesce_enable_start: 512
hw.cxgb.tx_coalesce_force: 0
hw.cxgb.txq_mr_size: 1024
hw.em.eee_setting: 0
hw.em.rx_process_limit: 100
hw.em.enable_msix: 1
hw.em.sbp: 0
hw.em.smart_pwr_down: 0
hw.em.txd: 1024
hw.em.rxd: 1024
hw.em.rx_abs_int_delay: 66
hw.em.tx_abs_int_delay: 66
hw.em.rx_int_delay: 0
hw.em.tx_int_delay: 66
hw.igb.rx_process_limit: 100
hw.igb.num_queues: 0
hw.igb.header_split: 0
hw.igb.max_interrupt_rate: 8000
hw.igb.enable_msix: 1
hw.igb.enable_aim: 1
hw.igb.txd: 1024
hw.igb.rxd: 1024
hw.firewire.hold_count: 0
hw.firewire.try_bmr: 1
hw.firewire.fwmem.speed: 2
hw.firewire.fwmem.eui64_lo: 0
hw.firewire.fwmem.eui64_hi: 0
hw.firewire.phydma_enable: 1
hw.firewire.nocyclemaster: 0
hw.firewire.fwe.rx_queue_len: 128
hw.firewire.fwe.tx_speed: 2
hw.firewire.fwe.stream_ch: 1
hw.firewire.sbp.tags: 0
hw.firewire.sbp.use_doorbell: 0
hw.firewire.sbp.scan_delay: 500
hw.firewire.sbp.login_delay: 1000
hw.firewire.sbp.exclusive_login: 1
hw.firewire.sbp.max_speed: -1
hw.firewire.sbp.auto_login: 1
hw.hifn.maxbatch: 1
hw.hifn.debug: 0
hw.malo.txbuf: 256
hw.malo.rxquota: 256
hw.malo.rxbuf: 256
hw.malo.txcoalesce: 8
hw.malo.pci.msi_disable: 0
hw.mfi.detect_jbod_change: 1
hw.mfi.max_cmds: 128
hw.mfi.event_class: 0
hw.mfi.event_locale: 65535
hw.mfi.msi: 1
hw.mwl.rxdmalow: 3
hw.mwl.rxquota: 640
hw.mwl.txcoalesce: 8
hw.mwl.txbuf: 256
hw.mwl.rxbuf: 640
hw.mwl.rxdesc: 256
hw.pccard.cis_debug: 0
hw.pccard.debug: 0
hw.cbb.debug: 0
hw.cbb.start_32_io: 4096
hw.cbb.start_16_io: 256
hw.cbb.start_memory: 2281701376
hw.pcic.pd6722_vsense: 1
hw.pcic.intr_mask: 57016
hw.pci.usb_early_takeover: 1
hw.pci.honor_msi_blacklist: 1
hw.pci.enable_msix: 1
hw.pci.enable_msi: 1
hw.pci.do_power_resume: 1
hw.pci.do_power_nodriver: 0
hw.pci.enable_io_modes: 1
hw.pci.default_vgapci_unit: -1
hw.pci.host_mem_start: 2147483648
hw.pci.mcfg: 1
hw.pci.irq_override_mask: 57080
hw.safe.rngmaxalarm: 8
hw.safe.rngbufsize: 16
hw.safe.rnginterval: 1
hw.usb.no_shutdown_wait: 0
hw.usb.no_boot_wait: 0
hw.usb.debug: 0
hw.usb.usb_lang_mask: 255
hw.usb.usb_lang_id: 9
hw.usb.template: 0
hw.usb.power_timeout: 30
hw.usb.no_pf: 1
hw.usb.no_cs_fail: 0
hw.usb.uath.regdomain: 0
hw.usb.uath.countrycode: 0
hw.usb.urtw.preamble_mode: 2
hw.usb.ucom.cons_baud: 9600
hw.usb.ucom.cons_subunit: 0
hw.usb.ucom.cons_unit: -1
hw.wi.debug: 0
hw.wi.txerate: 0
hw.intr_storm_threshold: 1000
hw.pagesizes: 4096 0
hw.availpages: 248088
hw.bus.devctl_queue: 1000
hw.bus.devctl_disable: 0
hw.nve_pollinterval: 0
hw.busdma.total_bpages: 513
hw.busdma.zone0.total_bpages: 513
hw.busdma.zone0.free_bpages: 513
hw.busdma.zone0.reserved_bpages: 0
hw.busdma.zone0.active_bpages: 0
hw.busdma.zone0.total_bounced: 63
hw.busdma.zone0.total_deferred: 0
hw.busdma.zone0.lowaddr: 0xffffffff
hw.busdma.zone0.alignment: 4096
hw.clockrate: 2194
hw.via_feature_xcrypt: 0
hw.via_feature_rng: 0
hw.instruction_sse: 1
hw.apic.enable_extint: 0
hw.mca.erratum383: 0
hw.mca.amd10h_L1TP: 1
hw.mca.enabled: 1
hw.mca.count: 0
hw.mca.interval: 3600
hw.mca.force_scan: 0
hw.acpi.supported_sleep_state: S1 S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 0
hw.acpi.disable_on_reboot: 0
hw.acpi.handle_reboot: 0
hw.acpi.reset_video: 0
hw.acpi.cpu.cx_lowest: C1


                    [2.1-BETA1][root@pfsense.localdomain]/root(11): flashrom -V
flashrom v0.9.5.2-r1515 on FreeBSD 8.3-RELEASE-p6 (i386), built with libpci 3.1.9, GCC 4.2.1 20070719  [FreeBSD], little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 4 usecs, 2194M loops per second, 10 myus = 14 us, 100 myus = 104 us, 1000 myus = 1006 us, 10000 myus = 10008 us, 16 myus = 20 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "To Be Filled By O.E.M."
DMI string system-product-name: "To Be Filled By O.E.M."
DMI string system-version: "To Be Filled By O.E.M."
DMI string baseboard-manufacturer: "To be filled by O.E.M."
DMI string baseboard-product-name: "To be filled by O.E.M."
DMI string baseboard-version: "To be filled by O.E.M."
DMI string chassis-type: "Desktop"
Found chipset "Intel ICH7/ICH7R" with PCI ID 8086:27b8\. Enabling flash write...
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x100000 bytes
BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0
Root Complex Register Block address = 0xfed1c000
GCS = 0x460: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x1 (SPI)
Top Swap : not enabled
SPIBAR = 0xfed1c000 + 0x3020
0x00: 0x0004     (SPIS)
0x02: 0x4140     (SPIC)
0x04: 0x00000000 (SPIA)
0x08: 0x1014ffff (SPID0)
0x0c: 0xffffffff (SPID0+4)
0x10: 0xffffffff (SPID1)
0x14: 0xffffffff (SPID1+4)
0x18: 0x00000000 (SPID2)
0x1c: 0x00000000 (SPID2+4)
0x20: 0x00000000 (SPID3)
0x24: 0x00000000 (SPID3+4)
0x28: 0x00000000 (SPID4)
0x2c: 0x00000000 (SPID4+4)
0x30: 0x00000000 (SPID5)
0x34: 0x00000000 (SPID5+4)
0x38: 0x00000000 (SPID6)
0x3c: 0x00000000 (SPID6+4)
0x40: 0x00000000 (SPID7)
0x44: 0x00000000 (SPID7+4)
0x50: 0x00000000 (BBAR)
0x54: 0x0006     (PREOP)
0x56: 0x543b     (OPTYPE)
0x58: 0x05d80302 (OPMENU)
0x5c: 0x0006019f (OPMENU+4)
0x60: 0x00000000 (PBR0)
0x64: 0x00000000 (PBR1)
0x68: 0x00000000 (PBR2)
Programming OPCODES...
program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
done
SPI Read Configuration: prefetching disabled, caching enabled, OK.
The following protocols are supported: SPI.
Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for SST SST25LF040A, 512 kB:
program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190
on-the-fly OPCODE (0xAB) re-programmed, op-pos=2
probe_spi_res2: id1 0x13, id2 0x13
Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x13, id2 0x13
Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xff, id2 0xff
Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xff, id2 0xff
Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xff, id2 0xff
Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID.
Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID.
Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID.
Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Chip status register is 00
Chip status register: Status Register Write Disable (SRWD) is not set
Chip status register: Bit 6 is not set
Chip status register: Bit 5 / Block Protect 3 (BP3) is not set
Chip status register: Bit 4 / Block Protect 2 (BP2) is not set
Chip status register: Bit 3 / Block Protect 1 (BP1) is not set
Chip status register: Bit 2 / Block Protect 0 (BP0) is not set
Chip status register: Write Enable Latch (WEL) is not set
Chip status register: Write In Progress (WIP/BUSY) is not set
Found ST flash chip "M25P80" (1024 kB, SPI) at physical address 0xfff00000.
Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Unknown SFDP-capable chip, 0 kB:
program_opcodes: preop=5006 optype=462b opmenu=055a0302c79f0190
on-the-fly OPCODE (0x5A) re-programmed, op-pos=2
No SFDP signature found.
Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0x20, id2 0x2014
Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xff, id2 0xff
Found ST flash chip "M25P80" (1024 kB, SPI).
No operations were specified.
Restoring MMIO space at 0x2822f070
Restoring MMIO space at 0x2822f07c
Restoring MMIO space at 0x2822f078
Restoring MMIO space at 0x2822f076
Restoring MMIO space at 0x2822f074
Restoring PCI config space for 00:1f:0 reg 0xdc

                    Steve

                    dmesg.boot.txt
                    dmidecode_output.txt

                    1 Reply Last reply Reply Quote 0
                    • M
                      menacingm
                      last edited by

                      Hello all,

                      I'm a relative n00b to the forum but have been playing with PFSense for a little over a year. I was running a Firebox X700 with PFSense running perfectly mostly thanks to all the hard work of all you fine folks, StephenW in particular. I outgrew the X700 and decided it was time to step up my PFSense hardware. So after some good forum reading I decided an economical upgrade was the XTM 5 series and purchased an XTM 505 on eBay.

                      Install was pretty basic. I actually flashed 2 CF cards one with 2.0.3 i386 and one with 2.0.3 x64 so I can be a guinea pig with testing 64 bit drivers and code. Slid the card in the CF slot and it booted up relatively quickly. As StephenW mentions the default Firebox serial settings are 115200 8 n 1 which you'll need set if you want to get to the BIOS (although there isn't much point as it's mostly read only). After that PFSense defaults back to 9600 8 n 1 so you'll have to change your serial settings back to finish configuring PFSense. I had a strange issue with type not transferring properly where each time I typed at about every 5th-6th key I would press was incorrect. It wasn't so bad that I couldn't delete the incorrect characters and get the WAN and LAN ports configured and IP'd. Probably a fault DB9-RJ45 cable but it was a new leftover cable from a Cisco install. Only mention this to see if it's common with anyone else.

                      For now I'm running 32 bit as I am using it as my primary router/firewall at home.  So after hooking it up and logging in I was able to get the LCD working by installing LCDProc Dev and using the following settings:

                      Com Port: Parallel Port 1 (/dev/lpt0)
                      Display Size: 2 rows 20 columns
                      Driver: Watchguard Firebox with SDEC (x86 only)
                      Refresh Frequency: 5 seconds
                      Rest is default

                      As mentioned earlier the keys work but the mapping is off. Any ideas on how to remedy this? Would it be a simple modification to /usr/local/etc/LCDD.conf ?

                      Once I get the keymapping working and StephenW complete the WGXepc update for the XTM 5 series this thing will be perfectly adapted to PFSense; aside from the incompatible Cavium Nitrox CN1605.

                      1 Reply Last reply Reply Quote 0
                      • M
                        menacingm
                        last edited by

                        FMertz,

                        Looking at dmidecode, it appears StephenW's and my UUID: 00020003-0004-0005-0006-000700080009 match. Could this be used as a unique identifier?

                        Anyone else with an XTM 5 series care to comment/check on this?

                        1 Reply Last reply Reply Quote 0
                        • stephenw10S
                          stephenw10 Netgate Administrator
                          last edited by

                          Like I say I think fmertz already implemented all of this. See:
                          http://forum.pfsense.org/index.php/topic,44034.msg276249.html#msg276249

                          Try that and see what happens.

                          Steve

                          Edit: Yep all looks to be there.

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            I finally got around to updating WGXepc to include the code for the XTM5. It turned out to be rather more difficult than I'd imagined.
                            Anyway get it here or here(Oops the topic was locked!).

                            Whilst investigating the SuperIO chip I found it was controlling the fans so I added code for that too. By default the fans are connected to the system_fan output which is set to run in 'Thermal Cruise' mode. The target temperature register is set to 0x37, I've yet to work out what that translates to but it must be quite high since the fans always run slow. They ramp down to a minimum speed but that is conveniently controllable. I have included code to set that in WGXepc.  :) Obviously be careful messing about with the cooling but it shouldn't be possible to cause any problems as the fans will just ramp up if it gets hot. Unfortunately there is a quirk with setting the minimum value to a speed that is greater than the current fan speed. The only way I could get this to take effect was to switch to manual mode and then back to Thermal Cruise which causes the fans to goto max and then ramp back down. Not the end of the world but slightly annoying (to me at least!). It may also be possible to set the target temperature. Th diagnostic LEDs are probably also connected via the SuperIO but I haven't thought of a good use for them yet.  ;)

                            Steve

                            1 Reply Last reply Reply Quote 0
                            • stephenw10S
                              stephenw10 Netgate Administrator
                              last edited by

                              Investigating the XTM8 box caused me to re-investigate the various bios editing tools available and I have now found that newer versions of amibcp are able to correctly edit the SuperIO tables without corrupting the bios in the process. So now we can have the bios correctly configure the SIO chip for gpio use and set the arm/disarm LED to red at boot, which seems like the way it should have been all along.

                              Flashing the bios is always a risk and I have bricked my own box doing it many times! However it was always due to a corrupt bios file rather than the flashing process itself and it is possible to recover from a bad flash (see earlier posts here). So the modified bios file is here. Flash at your own risk!

                              Modifications are:
                              Bios setup menus are unlocked and some aditional menus are unhidden.
                              LCD now reports 'pfSense V1.8' at boot time.
                              Speedstep is unlocked and enabled if you have a compatible CPU.
                              Arm/Disarm LED is now red from boot.

                              Probably the safest way to get this file, least chance of corruption, is to fetch it straight to the box.

                              [2.1-BETA1][root@pfsense.localdomain]/tmp(10): fetch https://sites.google.com/site/pfsensefirebox/home/xtm5_83.rom
xtm5_83.rom                                   100% of 1024 kB 1957 kBps

                              You can then also check its MD5 sum is correct:

                              [2.1-BETA1][root@pfsense.localdomain]/tmp(11): md5 xtm5_83.rom
MD5 (xtm5_83.rom) = e75bc93ca2db547a3facb8d611f0d441

                              Then write it with flashrom from there:

                              [2.1-BETA1][root@pfsense.localdomain]/tmp(13): flashrom -w xtm5_83.rom
flashrom v0.9.5.2-r1515 on FreeBSD 8.3-RELEASE-p8 (i386), built with libpci 3.1.9, GCC 4.2.1 20070719  [FreeBSD], little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.
Found chipset "Intel ICH7/ICH7R". Enabling flash write... OK.
Found ST flash chip "M25P80" (1024 kB, SPI) at physical address 0xfff00000.
Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... VERIFIED.

                              It may be necessary to reset the CMOS with the on board jumper to get access to the bios menus. My box has been unlocked for so long I can't remember if I had to and I have no easy way to test.  ::)

                              Steve

                              1 Reply Last reply Reply Quote 0
                              • M
                                menacingm
                                last edited by

                                Bravo as always Stephen. I will definitely take a look at this when I get ready to swap out the processor as speedstep is a much needed feature. Till then I'll stick with your new release of WGXepc.

                                Any subtle differences in the hardware between the XTM5 and XTM8? My understanding is that the hardware was the same and the different versions referenced unlocked features by license for the Watchguard software. Curious.

                                Thanks!

                                Modifications are:
                                Bios setup menus are unlocked and some aditional menus are unhidden.
                                LCD now reports 'pfSense V1.8' at boot time.
                                Speedstep is unlocked and enabled if you have a compatible CPU.
                                Arm/Disarm LED is now red from boot.

                                Probably the safest way to get this file, least chance of corruption, is to fetch it straight to the box.

                                [2.1-BETA1][root@pfsense.localdomain]/tmp(10): fetch https://sites.google.com/site/pfsensefirebox/home/xtm5_83.rom
xtm5_83.rom                                   100% of 1024 kB 1957 kBps

                                You can then also check its MD5 sum is correct:

                                [2.1-BETA1][root@pfsense.localdomain]/tmp(11): md5 xtm5_83.rom
MD5 (xtm5_83.rom) = e75bc93ca2db547a3facb8d611f0d441

                                Then write it with flashrom from there:

                                [2.1-BETA1][root@pfsense.localdomain]/tmp(13): flashrom -w xtm5_83.rom
flashrom v0.9.5.2-r1515 on FreeBSD 8.3-RELEASE-p8 (i386), built with libpci 3.1.9, GCC 4.2.1 20070719  [FreeBSD], little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.
Found chipset "Intel ICH7/ICH7R". Enabling flash write... OK.
Found ST flash chip "M25P80" (1024 kB, SPI) at physical address 0xfff00000.
Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.
Reading old flash chip contents... done.
Erasing and writing flash chip... Erase/write done.
Verifying flash... VERIFIED.

                                It may be necessary to reset the CMOS with the on board jumper to get access to the bios menus. My box has been unlocked for so long I can't remember if I had to and I have no easy way to test.  ::)

                                Steve

                                1 Reply Last reply Reply Quote 0
                                • stephenw10S
                                  stephenw10 Netgate Administrator
                                  last edited by

                                  The XTM5 and XTM8 are very different. Different box, different mother board.

                                  To get Speedstep sort-of working I had to use a modified DSDT file. However even when I had it seemingly functioning I could see any effects on either power consumption or heat. I put it down to the board/CPU supporting higher C states which reduce power anyway.

                                  Steve

                                  1 Reply Last reply Reply Quote 0
                                  • I
                                    iolaus
                                    last edited by

                                    Just ordered an XTM 505 off ebay and I'm excited to try out pfSense on it.  Has anyone successfully booted from or attached a USB drive or HDD yet?  Also, has anyone tried stephenw10's firmware update?

                                    Thanks!

                                    1 Reply Last reply Reply Quote 0
                                    • stephenw10S
                                      stephenw10 Netgate Administrator
                                      last edited by

                                      Hmm, interesting, it looks like I never tried it after unlocking the BIOS. It's definitely not possible to boot from USB without altering some bios settings and to do that you need to flash the unlocked version. That obviously carries some risk but I'm quite confident that image I linked to is not corrupt. I uploaded it, downloaded it again and re-flashed it to my box without issue. Just make sure the MD5 sum is correct.

                                      Steve

                                      1 Reply Last reply Reply Quote 0
                                      • E
                                        Eams
                                        last edited by

                                        From my experience with the XTM8 (810), you can't boot anything from the usb ports - I tried!

                                        I imagine the XTM505 will be the same - bios locked down and restricted as to what can be used - ie mouse and keyboard is pretty much as far as the bios will get you - until you unlock it.

                                        My XTM8 is currently out of action - deffo be careful flashing the bios ;)

                                        Eamon

                                        1 Reply Last reply Reply Quote 0
                                        • M
                                          menacingm
                                          last edited by

                                          StephenW10,

                                          A little late of a response but yea duh about the hardware differences… I was thinking XTM5 series: 515, 505 etc which are all the same hardware. I can't keep up with all the Watchguard models you are working on.  :P

                                          Also, after trying LCDProc-Dev (latest package) it seems the key mapping was not integrated into the latest dev package as my key mapping are still off. I'll post in the appropriate thread about this as well but wanted to reference it here, this being the official thread for XTM5 devices. Also, Stephen, could you enlighten me on the shellcmd you use to start/restart the LCDProc service? Thanks.

                                          LCDProc-Dev Thread:http://forum.pfsense.org/index.php/topic,44034.msg349010.html#msg349010

                                          iolaus,
                                          With all due respect to StephenW10 and thanks for his hard work, there isn't much to gain from unlocking the bios.

                                          I would echo Eams warning in that you do not want to flash your bios unless you know 100% that you will benefit from the features. If you want to tinker, I would suggest only doing so if you are not really relying on the hardware and can afford to brick it. You will need to have a level of comfort/experience with modifying hardware/bios as you may need to create a serial jumper soldered to the board to unbrick it or reflash the serial flash device (at least this was my understanding from reading through StephenW10s posts. Please correct me if I'm wrong).

                                          1 Reply Last reply Reply Quote 0
                                          • I
                                            iolaus
                                            last edited by

                                            I will be using my XTM505 in my local network so I'll definitely have to be careful not to brick it.  I had hoped to try out Snort but I'm wondering if I have to worry about the finite write capabilities of the CF card.  If so, is it possible to install additional storage (SSD or larger USB Flash), perhaps as secondary storage, without unlocking the BIOS?

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post