Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    2.1-BETA0 -> 2.1-BETA1 unbound won't install

    Scheduled Pinned Locked Moved 2.1 Snapshot Feedback and Problems - RETIRED
    63 Posts 14 Posters 21.4k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • J
      jcyr
      last edited by

      Hangs during install since the 1.4.20_2 update:

      Beginning package installation for Unbound…
      Downloading package configuration file... done.
      Saving updated package information... done.
      Downloading Unbound and its dependencies...
      Checking for package installation... Loading package configuration... done.
      Configuring package components...
      Additional files... done.
      Loading package instructions...
      Custom commands...
      Executing custom_php_install_command()...

      Installs the service but not the GUI components

      IPV6 Test: http://ipv6-test.com

      1 Reply Last reply Reply Quote 0
      • S
        survive
        last edited by

        Hi guys,

        Is there any indication that the problems in this post:

        http://forum.pfsense.org/index.php/topic,43044.msg234009.html#msg234009

        have been corrected?

        I've been dying to use unbound with pfsense for going on a year but each time I've given it a shot it runs great for about an hour then all my dhcp leases drop & everything that uses dhcp goes off-line. I can quickly recover by disabling unbound and turning the dns forwarder back on.

        -Will

        1 Reply Last reply Reply Quote 0
        • A
          athurdent
          last edited by

          @jcyr:

          Installs the service but not the GUI components

          Same here, the GUI components won't show up anymore, reinstalling XML does not help.

          1 Reply Last reply Reply Quote 0
          • L
            LinuxTracker
            last edited by

            @athurdent:

            @jcyr:

            Installs the service but not the GUI components

            Same here, the GUI components won't show up anymore, reinstalling XML does not help.

            I'll third it.
            I did a ground up install of 2.0.3 x86 yesterday and unbound is working.
            I did an upgrade from 2.0.2 x86 to 2.0.3 x86 today and am having the same issue mentioned just above.

            Poking around to see if I can come across a solution.

            1 Reply Last reply Reply Quote 0
            • rbgargaR
              rbgarga Developer Netgate Administrator
              last edited by

              It was caused by a typo, 1.4.20_3 fixes the issue.

              Renato Botelho

              1 Reply Last reply Reply Quote 0
              • A
                athurdent
                last edited by

                Thank you Renato and jimp, that looks really good now!

                Edit: there still seems to be a problem writing this (on NanoBSD) at some point:

                unbound: [78569:0] error: could not open autotrust file for writing, /usr/pbi/unbound-i386/etc/unbound/root-trust-anchor.78569-0: Read-only file system

                But the file /usr/pbi/unbound-i386/etc/unbound/root-trust-anchor is there, seems valid and unbound runs anyway. I'll keep an eye on this. I have put it "in production" on my home gateway now.

                1 Reply Last reply Reply Quote 0
                • T
                  Tawonga
                  last edited by

                  2.1-Beta1(amd64).

                  Standard Package Install installed Unbound 1.4.20_3, both service and UI, fine. Functioning without issues for a couple of hours.

                  Thanks Renato and all others involved. Brilliant package - worth waiting for.

                  1 Reply Last reply Reply Quote 0
                  • A
                    athurdent
                    last edited by

                    Something is not quite right yet. It restarts every hour on my system (NanoBSD), at exactly the same time.

                    
Apr 28 14:16:50	unbound: [61715:0] notice: Restart of unbound 1.4.20.
Apr 28 14:16:50	unbound: [61715:0] notice: init module 0: validator
Apr 28 14:16:50	unbound: [61715:0] notice: init module 1: iterator
Apr 28 14:16:50	unbound: [61715:0] info: start of service (unbound 1.4.20).

Apr 28 15:16:50	unbound: [61715:0] info: service stopped (unbound 1.4.20).
Apr 28 15:16:50	unbound: [61715:0] info: server stats for thread 0: 1096 queries, 874 answers from cache, 222 recursions, 23 prefetch
Apr 28 15:16:50	unbound: [61715:0] info: server stats for thread 0: requestlist max 13 avg 1.2898 exceeded 0 jostled 0
Apr 28 15:16:50	unbound: [61715:0] info: average recursion processing time 0.159908 sec
Apr 28 15:16:50	unbound: [61715:0] info: histogram of recursion processing times
Apr 28 15:16:50	unbound: [61715:0] info: [25%]=0.0201766 median[50%]=0.0504123 [75%]=0.237086
Apr 28 15:16:50	unbound: [61715:0] info: lower(secs) upper(secs) recursions
Apr 28 15:16:50	unbound: [61715:0] info: 0.000000 0.000001 25
Apr 28 15:16:50	unbound: [61715:0] info: 0.002048 0.004096 1
Apr 28 15:16:50	unbound: [61715:0] info: 0.008192 0.016384 17
Apr 28 15:16:50	unbound: [61715:0] info: 0.016384 0.032768 54
Apr 28 15:16:50	unbound: [61715:0] info: 0.032768 0.065536 26
Apr 28 15:16:50	unbound: [61715:0] info: 0.065536 0.131072 16
Apr 28 15:16:50	unbound: [61715:0] info: 0.131072 0.262144 34
Apr 28 15:16:50	unbound: [61715:0] info: 0.262144 0.524288 34
Apr 28 15:16:50	unbound: [61715:0] info: 0.524288 1.000000 13
Apr 28 15:16:50	unbound: [61715:0] info: 1.000000 2.000000 2
Apr 28 15:16:50	unbound: [61715:0] info: server stats for thread 1: 599 queries, 465 answers from cache, 134 recursions, 20 prefetch
Apr 28 15:16:50	unbound: [61715:0] info: server stats for thread 1: requestlist max 19 avg 1.32468 exceeded 0 jostled 0
Apr 28 15:16:50	unbound: [61715:0] info: average recursion processing time 0.113623 sec
Apr 28 15:16:50	unbound: [61715:0] info: histogram of recursion processing times
Apr 28 15:16:50	unbound: [61715:0] info: [25%]=0.0207076 median[50%]=0.0431942 [75%]=0.199339
Apr 28 15:16:50	unbound: [61715:0] info: lower(secs) upper(secs) recursions
Apr 28 15:16:50	unbound: [61715:0] info: 0.000000 0.000001 15
Apr 28 15:16:50	unbound: [61715:0] info: 0.001024 0.002048 1
Apr 28 15:16:50	unbound: [61715:0] info: 0.008192 0.016384 8
Apr 28 15:16:50	unbound: [61715:0] info: 0.016384 0.032768 36
Apr 28 15:16:50	unbound: [61715:0] info: 0.032768 0.065536 22
Apr 28 15:16:50	unbound: [61715:0] info: 0.065536 0.131072 6
Apr 28 15:16:50	unbound: [61715:0] info: 0.131072 0.262144 24
Apr 28 15:16:50	unbound: [61715:0] info: 0.262144 0.524288 21
Apr 28 15:16:50	unbound: [61715:0] info: 1.000000 2.000000 1
Apr 28 15:16:50	unbound: [61715:0] notice: Restart of unbound 1.4.20.
Apr 28 15:16:50	unbound: [61715:0] notice: init module 0: validator
Apr 28 15:16:50	unbound: [61715:0] notice: init module 1: iterator
Apr 28 15:16:50	unbound: [61715:0] info: start of service (unbound 1.4.20).
Apr 28 15:16:50	unbound: [61715:0] info: service stopped (unbound 1.4.20).
Apr 28 15:16:50	unbound: [61715:0] info: server stats for thread 0: 1 queries, 1 answers from cache, 0 recursions, 0 prefetch
Apr 28 15:16:50	unbound: [61715:0] info: server stats for thread 0: requestlist max 0 avg 0 exceeded 0 jostled 0
Apr 28 15:16:50	unbound: [61715:0] info: server stats for thread 1: 0 queries, 0 answers from cache, 0 recursions, 0 prefetch
Apr 28 15:16:50	unbound: [61715:0] info: server stats for thread 1: requestlist max 0 avg 0 exceeded 0 jostled 0
Apr 28 15:16:50	unbound: [61715:0] notice: Restart of unbound 1.4.20.
Apr 28 15:16:50	unbound: [61715:0] notice: init module 0: validator
Apr 28 15:16:50	unbound: [61715:0] notice: init module 1: iterator
Apr 28 15:16:50	unbound: [61715:0] info: start of service (unbound 1.4.20).

                    Maybe this is linked to DHCP somehow?

                    
Apr 28 15:16:50	dhcpd: Wrote 0 deleted host decls to leases file.
Apr 28 15:16:50	dhcpd: Wrote 0 new dynamic host decls to leases file.
Apr 28 15:16:50	dhcpd: Wrote 14 leases to leases file.

                    I don't know why dhcpd does this, it's not configured to backup it's leases and I don't see any cronjob that maybe related.

                    There are quite a few monitor instances running, too:

                    ps auxwww | grep unb
root     5605  0.0  0.1  3644  1520  ??  SN   10:47AM   0:08.85 /bin/sh /usr/local/etc/rc.d/unbound_monitor.sh start
root    59518  0.0  0.1  3644  1348  ??  SN   10:32AM   0:09.01 /bin/sh /usr/local/etc/rc.d/unbound_monitor.sh start
unbound 61715  0.0  1.0 31352 19644  ??  Is   11:10AM   0:10.83 unbound -c /usr/pbi/unbound-i386/etc/unbound/unbound.conf
root    70174  0.0  0.1  3644  1520  ??  SN   10:45AM   0:09.04 /bin/sh /usr/local/etc/rc.d/unbound_monitor.sh start
root    72082  0.0  0.1  3644  1364  ??  SN   10:33AM   0:09.75 /bin/sh /usr/local/etc/rc.d/unbound_monitor.sh start
root    59935  0.0  0.1  3644  1364  u0- S    10:33AM   0:09.09 /bin/sh /usr/local/etc/rc.d/unbound_monitor.sh start

                    Also odd, that the running unbound process has a start time of 11:10AM, shouldn't that be 3:16PM if it really restarted?
                    Any hints for me?

                    1 Reply Last reply Reply Quote 0
                    • J
                      jcyr
                      last edited by

                      I, on the other hand, after 12 hours have no instances of unbound_monitor.sh running!

                      IPV6 Test: http://ipv6-test.com

                      1 Reply Last reply Reply Quote 0
                      • rbgargaR
                        rbgarga Developer Netgate Administrator
                        last edited by

                        Please try 1.4.20_4 and let me know the results.

                        Renato Botelho

                        1 Reply Last reply Reply Quote 0
                        • A
                          athurdent
                          last edited by

                          Looks really good on the commandline now, only one unbound_monitor.sh. Works fine!
                          But it still restarts every hour, any idea what might be causing that?

                          1 Reply Last reply Reply Quote 0
                          • rbgargaR
                            rbgarga Developer Netgate Administrator
                            last edited by

                            @athurdent:

                            Looks really good on the commandline now, only one unbound_monitor.sh. Works fine!
                            But it still restarts every hour, any idea what might be causing that?

                            No idea until now, I couldn't replicate it on my local test env.

                            Renato Botelho

                            1 Reply Last reply Reply Quote 0
                            • J
                              jcyr
                              last edited by

                              Not quite there yet! Every time I change and save new dhcpd settings a new unbound_monitor.sh is added.

                              IPV6 Test: http://ipv6-test.com

                              1 Reply Last reply Reply Quote 0
                              • J
                                jcyr
                                last edited by

                                At the beginning of the /usr/local/etc/rc.d/unbound_monitor.sh script, there is the following:

                                **PROCS=/bin/pgrep -f unbound_monitor.sh | wc -l | awk '{print $1}'

                                if [ ${PROCS} -gt [color=red]2 ]; then
                                       echo "There are another unbound monitor proccess running"
                                       exit 0
                                fi**
                                Shouldn't it be:

                                **PROCS=/bin/pgrep -f unbound_monitor.sh | wc -l | awk '{print $1}'

                                if [ ${PROCS} -gt [color=red]1 ]; then
                                       echo "There are other unbound monitor proccess running"
                                       exit 0
                                fi**
                                ???

                                IPV6 Test: http://ipv6-test.com

                                1 Reply Last reply Reply Quote 0
                                • A
                                  athurdent
                                  last edited by

                                  Still reloads every hour, I cannot find a reason for that. The only thing I found out was that I have to issue```
                                  unbound-control reload

                                  
Another problem is that my DMZ on opt1 is missing the option```
domain-name-servers 192.168.1.254;
```in /var/dhcpd/etc/dhcpd.conf when I use unbound. I have opt1 defined as Network interface in unbound configuration and I can "dig" it from the DMZ. Using the system forwarder the option is there.
                                  1 Reply Last reply Reply Quote 0
                                  • rbgargaR
                                    rbgarga Developer Netgate Administrator
                                    last edited by

                                    unbound_monitor.sh was not working with last change, I changed the logic a bit and the way it's called and released 1.4.20_5. Let me know if you find any issues. I tested it on nanobsd and full installation.

                                    Renato Botelho

                                    1 Reply Last reply Reply Quote 0
                                    • A
                                      athurdent
                                      last edited by

                                      I found the reason for the unbound reloads on my syslog server. Why would dhcpleases do this?

                                      May  1 07:29:20 pfsense dhcpleases: Sending HUP signal to dns daemon(36838)
May  1 07:29:20 pfsense unbound: [36838:0] info: service stopped (unbound 1.4.20).

                                      And domain-name-servers is still missing from my opt1 DHCPD config as stated in my reply above.
                                      Other than that, everything looks good now, only one monitor process.
                                      Thanks for looking into this!

                                      1 Reply Last reply Reply Quote 0
                                      • W
                                        wallabybob
                                        last edited by

                                        @athurdent:

                                        I found the reason for the unbound reloads on my syslog server. Why would dhcpleases do this?

                                        PERHAPS it sends a signal to the local DNS to tell it the local name to IP address mapping has changed and the local DNS should read the updated information.

                                        1 Reply Last reply Reply Quote 0
                                        • A
                                          athurdent
                                          last edited by

                                          Hmm, but I have not enabled "Register DHCP static mappings". What else could cause this?

                                          1 Reply Last reply Reply Quote 0
                                          • W
                                            wallabybob
                                            last edited by

                                            @athurdent:

                                            Hmm, but I have not enabled "Register DHCP static mappings". What else could cause this?

                                            Perhaps it is trying to register a DHCP dynamic mapping! The thread at http://forum.pfsense.org/index.php/topic,33240.msg suggests dhcpleases sends a signal to the DNS to update the DNS registrations.

                                            DNS forwarder has an option Register DHCP leases in DNS forwarder. Do you have the equivalent set in Unbound? I don't know about Unbound and don't run it - does it "inherit" DNS forwarder settings?

                                            Maybe Unbound shouldn't stop when it gets a signal from dhcpleases.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.