Snort Package 2.5.7 – Issues
-
Good idea!!
-
Moved to its own thread, here: http://forum.pfsense.org/index.php/topic,61757.0.html
-
Could it be related to the fact that you use a private IP as WAN and then Snort doesnt see it because of the definition of home net??
-
Moved to its own thread, here: http://forum.pfsense.org/index.php/topic,61757.0.html
-
The meaning of this topic is for common Snort 2.5.7 issues and I have the feeling Snort is very solid now, at least on my system.
Now we are discussing a setup issue that is very specific. I think it is better to start a new topic on this pppoe setup. It will have a better title too
-
The meaning of this topic is for common Snort 2.5.7 issues and I have the feeling Snort is very solid now, at least on my system.
Now we are discussing a setup issue that is very specific. I think it is better to start a new topic on this pppoe setup. It will have a better title too
Might be a good idea ;D
I'll create a new thread and move my post in there.
-
Unless I am missing something simple, it looks like the internal interface (in my case em0) is not populating the home_net (192.168.1.0/24) variable correctly.
When I manually edit /usr/local/etc/snort/snort_52009_em0/snort.conf and reload the config, my home_net (192.168.1.0/24) is overwritten to only include the gateway (192.168.1.1) IP address. This obviously is causing me to miss events from the private network.
I've tried the following to resolve the issue:
1. Reinstalled the Snort package - failed to fix issue
2. Uninstalled/reinstalled Snort package - failed to fix the issue
3. Edited snort.conf for the internal interface - failed to fix the issueThanks,
CarbonCopy
-
Unless I am missing something simple, it looks like the internal interface (in my case em0) is not populating the home_net (192.168.1.0/24) variable correctly.
When I manually edit /usr/local/etc/snort/snort_52009_em0/snort.conf and reload the config, my home_net (192.168.1.0/24) is overwritten to only include the gateway (192.168.1.1) IP address. This obviously is causing me to miss events from the private network.
I've tried the following to resolve the issue:
1. Reinstalled the Snort package - failed to fix issue
2. Uninstalled/reinstalled Snort package - failed to fix the issue
3. Edited snort.conf for the internal interface - failed to fix the issueThanks,
CarbonCopy
I had the same issue and posted about it earlier in this thread, but here's the workaround I ended up using. Manually editing snort.conf doesn't work because it just gets recreated and overwritten.
Go to firewall, aliases, make an alias for your 192.168.1.0/24 network. I named mine LANSUB
Go to snort settings, whitelists, create a whitelist, called myhomenet for example, leave all the boxes checked and add the LANSUB alias.
Go to the snort interface settings, change the homenet from default to myhomenet.
Save and restart service(s)
-
It seems like there is an error in the script that runs that configures snort.conf. I am thinking this is a simple fix, but I'll let the experts speak to the issue. I don't really have time to dig on it. Thanks for the workaround by the way.
-CC
-
It seems like there is an error in the script that runs that configures snort.conf. I am thinking this is a simple fix, but I'll let the experts speak to the issue. I don't really have time to dig on it. Thanks for the workaround by the way.
-CC
When you edit the Snort interface: What is defined for Homenet in Snort Interface settings?
-
It seems like there is an error in the script that runs that configures snort.conf. I am thinking this is a simple fix, but I'll let the experts speak to the issue. I don't really have time to dig on it. Thanks for the workaround by the way.
-CC
How many interfaces are you running Snort on? Just the WAN, or WAN and LAN, or some other combination? The code that builds the snort.conf file (and the $HOME_NET variable) asks pfSense for the addresses associated with the interface Snort is running on, and then any far-end gateways (for example, on the WAN side).
Bill
-
It seems like there is an error in the script that runs that configures snort.conf. I am thinking this is a simple fix, but I'll let the experts speak to the issue. I don't really have time to dig on it. Thanks for the workaround by the way.
-CC
How many interfaces are you running Snort on? Just the WAN, or WAN and LAN, or some other combination? The code that builds the snort.conf file (and the $HOME_NET variable) asks pfSense for the addresses associated with the interface Snort is running on, and then any far-end gateways (for example, on the WAN side).
Bill
On my setup I had the same error. I have 4 interfaces, WAN, LAN, Opt1 (OpenVPN server for mobile ssl clients) and Opt2 (OpenVPN Client for a site to site shared key vpn). I run Snort on the WAN and LAN interfaces. On the snort instance on my LAN interface, it detected the IP of the interface (192.168.13.1) but did not add 192.168.13.0/24. It did catch my VPN subnets (192.168.14.0/24 for the mobile, and 10.0.8.0/24 for the site to site connection), Wan subnet, dns servers, and localhost.
I think the wan interface came up with the same list, but I don't have access to the router right now to look.
I tried digging around the code to see where the issue was but ran out of time last night.
-
On my setup I had the same error. I have 4 interfaces, WAN, LAN, Opt1 (OpenVPN server for mobile ssl clients) and Opt2 (OpenVPN Client for a site to site shared key vpn). I run Snort on the WAN and LAN interfaces. On the snort instance on my LAN interface, it detected the IP of the interface (192.168.13.1) but did not add 192.168.13.0/24. It did catch my VPN subnets (192.168.14.0/24 for the mobile, and 10.0.8.0/24 for the site to site connection), Wan subnet, dns servers, and localhost.
I think the wan interface came up with the same list, but I don't have access to the router right now to look.
I tried digging around the code to see where the issue was but ran out of time last night.
And you have the latest 2.5.7 version of the Snort package, correct?
The place where this is generated is wholly within the file /usr/local/pkg/snort.inc. The functions are near the very top of that file. They are called from the same file down in a function near the bottom called snort_generate_conf(). The actual line number is 2178. The called function that actually builds the $HOME_NET list is snort_build_list() that starts on line 154 in the same file.
You can experiment in that file with some edits if you want to. Just save a copy before you monkey with it, so if you mess it up you can easily restore. That file is the critical core of the Snort package, and if messed up, then no part of Snort will work correctly (including even the uninstall piece). So consider yourself warned … :D
If you can figure something out that either I or Ermal overlooked, please post back.
Bill
-
You can experiment in that file with some edits if you want to. Just save a copy before you monkey with it, so if you mess it up you can easily restore. That file is the critical core of the Snort package, and if messed up, then no part of Snort will work correctly (including even the uninstall piece). So consider yourself warned … :D
If you can figure something out that either I or Ermal overlooked, please post back.
Bill
Well, I fixed it, but I'm not sure you're going to like how :)
so in snort.inc line 209, it checks to see if the interface has a gateway configured, and if it doesn't it skips adding it to the list. I feel like I'm missing why having a gateway or not matters. Looks like this change was made 1-26 by ermal: https://github.com/pfsense/pfsense-packages/commit/b97368f2ed50c70ba7102acacd7d65cc3ffec109#config/snort/snort.inc
My LAN interface doesn't have a gateway specified. If I comment out 208/209 (and also 220/221 for ipv6) it adds 192.168.13.1/24 and functions properly.
-
Well, I fixed it, but I'm not sure you're going to like how :)
so in snort.inc line 209, it checks to see if the interface has a gateway configured, and if it doesn't it skips adding it to the list. I feel like I'm missing why having a gateway or not matters. Looks like this change was made 1-26 by ermal: https://github.com/pfsense/pfsense-packages/commit/b97368f2ed50c70ba7102acacd7d65cc3ffec109#config/snort/snort.inc
My LAN interface doesn't have a gateway specified. If I comment out 208/209 (and also 220/221 for ipv6) it adds 192.168.13.1/24 and functions properly.
I have been thinking about this whole $HOME_NET process since I made my previous post. I believe some fundamental changes can be made to improve the logic. You are correct that Ermal made some tweaks in this code earlier this year to address a problem with users' far-end gateway getting blocked on the WAN side. It is apparent, though, the logic around that may have some unintended consequences.
There is nothing I see intrinsically wrong with your fix. I will experiment a bit myself and see what I come up with. I don't want to post changes in this critical area of Snort without a lot of testing and careful thought.
My longer-term goal is to resurrect the Snort-Dev package and use it to test these kinds of things with a group of folks who have the time and equipment to help test Snort out there on the bleeding edge. That's much better than essentially keeping the production package in a state of semi-constant flux.
For folks currently impacted by this, they can manually create a suitable Alias and then create a Whitelist from that Alias. Finally, on the Snort Interface Settings tab for the affected interface, set $HOME_NET to the created whitelist object.
Bill
-
I feel like I'm missing why having a gateway or not matters.
The test for a gateway is the best way to see if the interface is a likely "WAN" interface. As you said, LAN interfaces will not typically have gateways associated with them. Notice the gateway test is within the "if statement" context for adding the WAN IP to the list.
I think I can improve on this logic, but I want to test my change very, very well before I consider creating a Pull Request for it. I can, when I get something working, recruit some volunteers for testing.
Bill
-
Could this be a cause for Snort not seeing the /24 subnet but you manually have to configure all subnet IP's as values in an alias?
-
Could this be a cause for Snort not seeing the /24 subnet but you manually have to configure all subnet IP's as values in an alias?
Yes, after looking at the code section in detail, I can see where it will get misled when an interface has no gateway (like the LAN, for example). I'm cooking up a better way to deal with this, but as I said I want to take some time and do this carefully.
Bill
-
SUPER!!
-
For folks currently impacted by this, they can manually create a suitable Alias and then create a Whitelist from that Alias. Finally, on the Snort Interface Settings tab for the affected interface, set $HOME_NET to the created whitelist object.
I already was doing that and I had this on my wish list for Snort, since I noticed that on my WAN interface the whole subnet was on $HOME_NET and not just the WAN IP address and I don't like my neighbors there.
It is also possible to redefine $HOME_NET when editing the interface in "Advanced configuration pass through". I tested that a week ago.