Virtual IP Duplicated on Interface Change

stompro

Hello, I just noticed this on a test machine and I'm wondering if this would be considered a bug.

Running 2.1-Beta1(i386) Thur May 2 build on a netgate Hamakua-1U.

I have 12 Virtual IP's setup on my wan interface. I changed the physical interface that the wan interface is associated with. When I looked at the ifconfig, I see that the virtual IP's are now setup for both the old and new interfaces. It looks like the code that deals with interface reassignment may need to remove the virual ip's when there is a change.

Should I file this as a bug? Or is this something else I'm running into. I'll make sure I can reproduce the problem next week.

em2: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
	options=4209b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic,vlan_hwtso>ether 00:90:0b:14:f7:bc
	inet6 fe80::290:bff:fe14:f7bb%em2 prefixlen 64 scopeid 0x3
	inet 216.234.20.99 netmask 0xffffffff broadcast 216.234.20.99
	inet 216.234.20.100 netmask 0xffffffff broadcast 216.234.20.100
	inet 216.234.20.101 netmask 0xffffffff broadcast 216.234.20.101
	inet 216.234.20.102 netmask 0xffffffff broadcast 216.234.20.102
	inet 216.234.20.103 netmask 0xffffffff broadcast 216.234.20.103
	inet 216.234.20.104 netmask 0xffffffff broadcast 216.234.20.104
	inet 216.234.20.105 netmask 0xffffffff broadcast 216.234.20.105
	inet 216.234.20.106 netmask 0xffffffff broadcast 216.234.20.106
	inet 216.234.20.107 netmask 0xffffffff broadcast 216.234.20.107
	inet 216.234.20.108 netmask 0xffffffff broadcast 216.234.20.108
	inet 216.234.20.109 netmask 0xffffffff broadcast 216.234.20.109
	inet 216.234.20.110 netmask 0xffffffff broadcast 216.234.20.110
	nd6 options=1 <performnud>media: Ethernet autoselect (1000baseT <full-duplex>)
	status: active
fxp0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
	options=2009 <rxcsum,vlan_mtu,wol_magic>ether 00:90:0b:14:f7:be
	inet 216.234.20.98 netmask 0xfffffff0 broadcast 216.234.20.111
	inet6 fe80::290:bff:fe14:f7be%fxp0 prefixlen 64 scopeid 0x5
	inet 216.234.20.99 netmask 0xffffffff broadcast 216.234.20.99
	inet 216.234.20.100 netmask 0xffffffff broadcast 216.234.20.100
	inet 216.234.20.101 netmask 0xffffffff broadcast 216.234.20.101
	inet 216.234.20.102 netmask 0xffffffff broadcast 216.234.20.102
	inet 216.234.20.103 netmask 0xffffffff broadcast 216.234.20.103
	inet 216.234.20.104 netmask 0xffffffff broadcast 216.234.20.104
	inet 216.234.20.105 netmask 0xffffffff broadcast 216.234.20.105
	inet 216.234.20.106 netmask 0xffffffff broadcast 216.234.20.106
	inet 216.234.20.107 netmask 0xffffffff broadcast 216.234.20.107
	inet 216.234.20.108 netmask 0xffffffff broadcast 216.234.20.108
	inet 216.234.20.109 netmask 0xffffffff broadcast 216.234.20.109
	inet 216.234.20.110 netmask 0xffffffff broadcast 216.234.20.110
	nd6 options=1 <performnud>media: Ethernet autoselect (none)
	status: no carrier</performnud></rxcsum,vlan_mtu,wol_magic></up,broadcast,running,simplex,multicast></full-duplex></performnud></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic,vlan_hwtso></up,broadcast,running,simplex,multicast>

cmb

If that's reproducible, yeah please file a bug report with steps to replicate.

stompro

The situation does clear up after a reboot, but comes back when I change the wan interface again. I will file a bug report.
Josh