Dansguardian 2.12.0.3 Signal 11
-
Just got another one… :-[
[/quote]How many on older version.
this latest version suports max clients=8192
-
If you play with maxagechildren it change something ?
I mean maxagechildren = 10 more signal 11 than maxagechildren = 15000 ? -
Just got another one… :-[
[/quote]How many on older version.
this latest version suports max clients=8192
So far it doesn't seem like I'm getting as many. I've only had one in the last 24 hours and I was getting a half dozen or so. I'll try playing with MaxAgeChildren as well…
-
Traffic as usual ? more or less ?
-
Traffic as usual ? more or less ?
Haven't been monitoring total traffic well enough to know. I dropped MaxAgeChildren from 4000 down to 1000 after my last post and I got 5 more signal 11's last night…
I'll bump it up to about 8000 and see what happens.
-
Traffic as usual ? more or less ?
Haven't been monitoring total traffic well enough to know. I dropped MaxAgeChildren from 4000 down to 1000 after my last post and I got 5 more signal 11's last night…
I'll bump it up to about 8000 and see what happens.
So If I understand right
With 4000 -> 1
With 1000 -> 4Interresting …
Another question, did you restart DG each day ?
-
Another question, did you restart DG each day ?
I didn't manually restart it… but I believe saving the setting (in the UI) would have at least done a soft restart... and it was 5 of them at 1000.
BTW... Bumped it up to 8000 and had 3 more last night.
-
Ok thank, can you try with 300 ?
There is nothing in the log just before signal 11 , and no complaint from users ?
Are you agree to test a special version which should help us ? I hope without problem … -
BTW… Bumped it up to 8000 and had 3 more last night.
Last night ? Without activity ?
Please restart the process, and take a look for signal 11 (also with soft restart if you can) -
http://numsys.eu/dansguardian/pfsense/ This test package contains two changes
- Fixed dansguardian -N was broken with recent 2.12.0.3
- Change behaviour when a child die (just a test for Freebsd) also add some informations in syslog
I'm focused about child die because DG seem works good although signal 11 is a critical message, so maybe there is a problem only when it exit.
But perhaps I'm wrong and the user just refresh and take an another process, very hard to test without having a working Freebsd …If someone can try, I need
- Just run this version and post here the syslog part with signal 11 , if the problem still present also try to run with dansguardian -N (no background)
But the best way is to make a debug version --with-dgdebug=on and run dg with dansguardian -N /tmp/debug and post the file somewhere (after one signal 11 of course)
Be careful dansguardian -N reduce performance
-
http://numsys.eu/dansguardian/pfsense/ This test package contains two changes
- Fixed dansguardian -N was broken with recent 2.12.0.3
- Change behaviour when a child die (just a test for Freebsd) also add some informations in syslog
I'm focused about child die because DG seem works good although signal 11 is a critical message, so maybe there is a problem only when it exit.
But perhaps I'm wrong and the user just refresh and take an another process, very hard to test without having a working Freebsd …If someone can try, I need
- Just run this version and post here the syslog part with signal 11 , if the problem still present also try to run with dansguardian -N (no background)
But the best way is to make a debug version --with-dgdebug=on and run dg with dansguardian -N /tmp/debug and post the file somewhere (after one signal 11 of course)
Be careful dansguardian -N reduce performance
Is this version compiled to run under freebsd 64 bit?
-
Is this version compiled to run under freebsd 64 bit?
I'ts only the source code.
I've compiled it for amd64. Check on my repo.
http://e-sac.siteseguro.ws/packages/amd64/8/All/dansguardian-2.12.0.6.sig11.tbz
-
Yes sorry,
Marcelloc can you also make a package with and without "–with-dgdebug=on" ?
I think the first step is trying without@rjcrowder have you tried with 300, or less ?
-
Marcelloc can you also make a package with and without "–with-dgdebug=on" ?
Sure, It's on my repo now.
http://e-sac.siteseguro.ws/packages/amd64/8/All/dansguardian-2.12.0.6.sig11.debug.tbz
-
Marcelloc can you also make a package with and without "–with-dgdebug=on" ?
Sure, It's on my repo now.
http://e-sac.siteseguro.ws/packages/amd64/8/All/dansguardian-2.12.0.6.sig11.debug.tbz
Thanks Marcello… have been a little busy. I will try to get this in over the weekend...
-
Yes sorry,
Marcelloc can you also make a package with and without "–with-dgdebug=on" ?
I think the first step is trying without@rjcrowder have you tried with 300, or less ?
OK… I wasn't 100% sure, so I made some assumptions about what you were asking for.
At the moment, I'm running dans as follows...
nohup ./dansguardian-2.12.0.6-dbg -N > & /tmp/debug &This will send all stdout and stderr messages to /tmp/debug. I'll let you know if I get a Sig 11
-
Perfect, Be careful the system can be unstable, If you have a problem with debug mode (100 % cpu or high memory usage, disk full, etc) try the other build from Marcelloc. It's less interesting for us but it's more faster.
Thanks for your help
-
Perfect, Be careful the system can be unstable, If you have a problem with debug mode (100 % cpu or high memory usage, disk full, etc) try the other build from Marcelloc. It's less interesting for us but it's more faster.
Thanks for your help
OK… got a signal 11 earlier this afternoon. Uploading now to my public dropbox - https://www.dropbox.com/sh/y3qoeiyxnvxl8c1/xmr7LJpScy It might take a while and I'll warn you that the file is huge. Let me know when you've got it. Thanks!
-
I've got it, thanks
Doh big file ! It's not easy to find where the "signal 11" hides -
I've got it, thanks
Doh big file ! It's not easy to find where the "signal 11" hidesI caught it fairly quickly… should be toward the end somewhere...
