Multi LAN + Squid + Squidguard + MultiWAN

space_new

As I said, you can use tcp_outgoing_address LAN1 WAN1 and so on.

Hi,
thx for reply…
but if I configure custom option of Squid with: tcp_outgoing_address 192.168.0.0/24 191.X.Z.T, I recive an error from squid.
If i write
alc int_net 192.168.0.0/24
tcp_outgoing_address 191.X.Z.T int_net
squid not return any error, but the traffic do not sent through 191.X.Z.T!!!

space_new

Someone can help me? :'(

Regards,

kelsen

Post a screen shot of your squid configuration.
You are using failover? if yes, post the lan rules and float too.

space_new

@kelsen:

Post a screen shot of your squid configuration.
You are using failover? if yes, post the lan rules and float too.

This is my custom options on squid.
I do not have failover!

http://imageshack.us/photo/my-images/703/capturetim.jpg/?sa=0

kelsen

This IP is your Gateway or Wan IP? it must be your Wan IP. Besides this, there is nothing else to do.

space_new

@kelsen:

This IP is your Gateway or Wan IP? it must be your Wan IP. Besides this, there is nothing else to do.

Thx for reply…
This is the address of my WAN interface (not CARP address)

kelsen

Yet it still didn't work? have you saw your ip on www.meuip.com.br while using proxy?

space_new

@kelsen:

Yet it still didn't work? have you saw your ip on www.meuip.com.br while using proxy?

Hi, the site report that my ip is the default gw and not 191.X.Z.T (proxy is detected)

niebla

Take a look at your DNS Settings. Are you suing the forwarder? Does the proxy have any DNS entries? If so try removing them.

space_new

@niebla:

Take a look at your DNS Settings. Are you suing the forwarder? Does the proxy have any DNS entries? If so try removing them.

Yes, I use DNS forwarder of PfSense, but none configurationa about DNS is dove on proxy server…