Dansguardian 2.12.0.3 Signal 11
-
Is this version compiled to run under freebsd 64 bit?
I'ts only the source code.
I've compiled it for amd64. Check on my repo.
http://e-sac.siteseguro.ws/packages/amd64/8/All/dansguardian-2.12.0.6.sig11.tbz
-
Yes sorry,
Marcelloc can you also make a package with and without "–with-dgdebug=on" ?
I think the first step is trying without@rjcrowder have you tried with 300, or less ?
-
Marcelloc can you also make a package with and without "–with-dgdebug=on" ?
Sure, It's on my repo now.
http://e-sac.siteseguro.ws/packages/amd64/8/All/dansguardian-2.12.0.6.sig11.debug.tbz
-
Marcelloc can you also make a package with and without "–with-dgdebug=on" ?
Sure, It's on my repo now.
http://e-sac.siteseguro.ws/packages/amd64/8/All/dansguardian-2.12.0.6.sig11.debug.tbz
Thanks Marcello… have been a little busy. I will try to get this in over the weekend...
-
Yes sorry,
Marcelloc can you also make a package with and without "–with-dgdebug=on" ?
I think the first step is trying without@rjcrowder have you tried with 300, or less ?
OK… I wasn't 100% sure, so I made some assumptions about what you were asking for.
At the moment, I'm running dans as follows...
nohup ./dansguardian-2.12.0.6-dbg -N > & /tmp/debug &This will send all stdout and stderr messages to /tmp/debug. I'll let you know if I get a Sig 11
-
Perfect, Be careful the system can be unstable, If you have a problem with debug mode (100 % cpu or high memory usage, disk full, etc) try the other build from Marcelloc. It's less interesting for us but it's more faster.
Thanks for your help
-
Perfect, Be careful the system can be unstable, If you have a problem with debug mode (100 % cpu or high memory usage, disk full, etc) try the other build from Marcelloc. It's less interesting for us but it's more faster.
Thanks for your help
OK… got a signal 11 earlier this afternoon. Uploading now to my public dropbox - https://www.dropbox.com/sh/y3qoeiyxnvxl8c1/xmr7LJpScy It might take a while and I'll warn you that the file is huge. Let me know when you've got it. Thanks!
-
I've got it, thanks
Doh big file ! It's not easy to find where the "signal 11" hides -
I've got it, thanks
Doh big file ! It's not easy to find where the "signal 11" hidesI caught it fairly quickly… should be toward the end somewhere...
-
Yes in system.log.sig11
Jun 1 17:04:21 pfsense kernel: pid 10303 (dansguardian-2.12.0), uid 106: exited on signal 11But it's hard to correlate with the other file, for the moment I didn't see any point
-
But it's hard to correlate with the other file, for the moment I didn't see any point
yea… I was wondering how you could correlate them. There's nothing in the debug log that says "signal 11"... That's all I have though - those two logs.
-
Very, very strange, there is no error in debug's file between Date: Sat, 01 Jun 2013 17:02:09 GMT and Date: Sat, 01 Jun 2013 17:04:31 GMT
DG run with very low load, without problembusychildren:1
freechildren:32
waitingfor:0Seems close to http://forum.pfsense.org/index.php?topic=58395.0 in both case the process seem doesn't really crashed (no need to restart)
I don't know what to think, there is no problem with oldest versions ?
EDIT: For those who suffer from "dansguardian -N" issues I will release a new version with a fix next week, here http://numsys.eu/search.php?search=Dansguardian
-
Marcelloc as you know there was a problem with pcre recently, do you compile with pcre on or off ?
Can we make a test with off ? -
Seems close to http://forum.pfsense.org/index.php?topic=58395.0 in both case the process seem doesn't really crashed (no need to restart)
I know I've seen it since 12.0.3 Not sure prior to that…
-
Marcelloc as you know there was a problem with pcre recently, do you compile with pcre on or off ?
Can we make a test with off ?I think it's marked as a dependence on freebsd ports, I'll try to compile it without pcre.
Does dansguardian works fine without pcre????
-
Does dansguardian works fine without pcre????
see this http://contentfilter.futuragts.com/wiki/doku.php?id=pattern_matching. However - looks like compiling without PCRE may cause a problem with some of the regex expressions in the current config…
-
Yes, pcre is for advanced regex
-
Very, very strange, there is no error in debug's file between Date: Sat, 01 Jun 2013 17:02:09 GMT and Date: Sat, 01 Jun 2013 17:04:31 GMT
DG run with very low load, without problembusychildren:1
freechildren:32
waitingfor:0Seems close to http://forum.pfsense.org/index.php?topic=58395.0 in both case the process seem doesn't really crashed (no need to restart)
I don't know what to think, there is no problem with oldest versions ?
EDIT: For those who suffer from "dansguardian -N" issues I will release a new version with a fix next week, here http://numsys.eu/search.php?search=Dansguardian
Hey guys… just wanted to bump this thread and see if there was any update. I'm still getting the occasional signal 11. Doesn't seem to cause any perceptible problem, but I"m thinking it's something that should get fixed... Any further ideas or things I can test to help with this issue?
-
We had rewritten a part of engine for Linux ( http://numsys.eu/search.php?search=Dansguardian ), but the project need help for Freebsd, testing and new codes …
I'm searching how will the project be sustained after, an sponsor ? a fork ? I do not yet know -
We had rewritten a part of engine for Linux ( http://numsys.eu/search.php?search=Dansguardian ), but the project need help for Freebsd, testing and new codes …
I'm searching how will the project be sustained after, an sponsor ? a fork ? I do not yet knowSo is there already a BSD version that uses kqueue? Does the epoll rewrite fix the sig 11 issue?
No promises, but I might pull the code down for 2.12.0.7 and take a look at it…
