Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    IPv6 DHCP-PD – radvd dies after interface reset - dhcpv6 does not reaquire addr

    Scheduled Pinned Locked Moved 2.1 Snapshot Feedback and Problems - RETIRED
    166 Posts 21 Posters 77.4k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • R
      razzfazz
      last edited by

      @johnpoz:

      edit:  Look at that, bing bang zoom - couple clicks and ipv6 is working ;)

      Is this with the stable version or with the development snapshot?

      1 Reply Last reply Reply Quote 0
      • johnpozJ
        johnpoz LAYER 8 Global Moderator
        last edited by

        that was with 1.34, stable version.

        An intelligent man is sometimes forced to be drunk to spend time with his fools
        If you get confused: Listen to the Music Play
        Please don't Chat/PM me for help, unless mod related
        SG-4860 24.11 | Lab VMs 2.8, 24.11

        1 Reply Last reply Reply Quote 0
        • P
          priller
          last edited by

          OK, count me in.  I loaded m0n0wall (1.8.1b540) on a new VM.  Just for the curiosity of seeing it survive the Comcast Day-4 DHCPv6 lease expiration problem that pfSense has.

          –-

          I like seeing that m0n0wall has the ability to statically configure a DUID.  That can certainly be handy.  I looked into the the pfSense config XML and see that there is a DUID parameter in there, but it has not been implemented in the GUI.  Wonder why?

          1 Reply Last reply Reply Quote 0
          • B
            BrianPlencner
            last edited by

            @wallabybob:

            Please post any reports from the system log (displayed by pfSense shell command```
            clog /var/log/system.log

            I just did this command now.  I don't know what help it will provide, as my system uptime is 12 Days 19 Hours 36 Minutes 12 Seconds.  But, I did want to provide what I have when I run this command now, in case it can provide any information.

            
$ clog /var/log/system.log
May 11 19:17:09 pfSense syslogd: kernel boot file is /boot/kernel/kernel
May 11 19:17:09 pfSense kernel: 9;49m
May 11 19:17:09 pfSense kernel: 39;49m
May 11 19:17:09 pfSense kernel: m
May 11 19:17:09 pfSense kernel: m
May 11 19:17:09 pfSense kernel: m
May 11 19:17:09 pfSense kernel: ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
May 11 19:17:09 pfSense kernel: m
May 11 19:17:09 pfSense kernel: Waiting (max 60 seconds) for system process `vnlru' to stop...done
May 11 19:17:09 pfSense kernel: Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
May 11 19:17:09 pfSense kernel: Waiting (max 60 seconds) for system process `syncer' to stop...
May 11 19:17:09 pfSense kernel: Syncing disks, vnodes remaining...0 0 0 0 done
May 11 19:17:09 pfSense kernel: All buffers synced.
May 11 19:17:09 pfSense kernel: Uptime: 9m33s
May 11 19:17:09 pfSense kernel: usbus0: Controller shutdown
May 11 19:17:09 pfSense kernel: uhub0: at usbus0, port 1, addr 1 (disconnected)
May 11 19:17:09 pfSense kernel: ugen0.2: <microsoft>at usbus0 (disconnected)
May 11 19:17:09 pfSense kernel: ukbd0: at uhub0, port 1, addr 2 (disconnected)
May 11 19:17:09 pfSense kernel: uhid0: at uhub0, port 1, addr 2 (disconnected)
May 11 19:17:09 pfSense kernel: usbus0: Controller shutdown complete
May 11 19:17:09 pfSense kernel: Rebooting...
May 11 19:17:09 pfSense kernel: Copyright (c) 1992-2012 The FreeBSD Project.
May 11 19:17:09 pfSense kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
May 11 19:17:09 pfSense kernel: The Regents of the University of California. All rights reserved.
May 11 19:17:09 pfSense kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
May 11 19:17:09 pfSense kernel: FreeBSD 8.3-RELEASE-p8 #0: Thu May  9 07:29:43 EDT 2013
May 11 19:17:09 pfSense kernel: root@snapshots-8_3-i386.builders.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
May 11 19:17:09 pfSense kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
May 11 19:17:09 pfSense kernel: CPU: Intel Pentium III (730.97-MHz 686-class CPU)
May 11 19:17:09 pfSense kernel: Origin = "GenuineIntel"  Id = 0x683  Family = 6  Model = 8  Stepping = 3
May 11 19:17:09 pfSense kernel: Features=0x383f9ff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse>May 11 19:17:09 pfSense kernel: real memory  = 536870912 (512 MB)
May 11 19:17:09 pfSense kernel: avail memory = 501481472 (478 MB)
May 11 19:17:09 pfSense kernel: wlan: mac acl policy registered
May 11 19:17:09 pfSense kernel: ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
May 11 19:17:09 pfSense kernel: ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
May 11 19:17:09 pfSense kernel: module_register_init: MOD_LOAD (ipw_bss_fw, 0xc07baca0, 0) error 1
May 11 19:17:09 pfSense kernel: ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
May 11 19:17:09 pfSense kernel: ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
May 11 19:17:09 pfSense kernel: module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07bad40, 0) error 1
May 11 19:17:09 pfSense kernel: ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
May 11 19:17:09 pfSense kernel: ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
May 11 19:17:09 pfSense kernel: module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07bade0, 0) error 1
May 11 19:17:09 pfSense kernel: kbd1 at kbdmux0
May 11 19:17:09 pfSense kernel: cryptosoft0: <software crypto="">on motherboard
May 11 19:17:09 pfSense kernel: padlock0: No ACE support.
May 11 19:17:09 pfSense kernel: acpi0: <dell zuul="">on motherboard
May 11 19:17:09 pfSense kernel: acpi0: [ITHREAD]
May 11 19:17:09 pfSense kernel: acpi0: Power Button (fixed)
May 11 19:17:09 pfSense kernel: acpi0: reservation of 0, a0000 (3) failed
May 11 19:17:09 pfSense kernel: acpi0: reservation of 100000, 1ff00000 (3) failed
May 11 19:17:09 pfSense kernel: Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
May 11 19:17:09 pfSense kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
May 11 19:17:09 pfSense kernel: cpu0: <acpi cpu="">on acpi0
May 11 19:17:09 pfSense kernel: acpi_button0: <sleep button="">on acpi0
May 11 19:17:09 pfSense kernel: pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
May 11 19:17:09 pfSense kernel: pci0: <acpi pci="" bus="">on pcib0
May 11 19:17:09 pfSense kernel: agp0: <intel 82815="" (i815="" gmch)="" host="" to="" pci="" bridge="">on hostb0
May 11 19:17:09 pfSense kernel: pcib1: <pci-pci bridge="">at device 1.0 on pci0
May 11 19:17:09 pfSense kernel: pci2: <pci bus="">on pcib1
May 11 19:17:09 pfSense kernel: vgapci0: <vga-compatible display="">mem 0xfd000000-0xfdffffff,0xe0000000-0xefffffff irq 11 at device 0.0 on pci2
May 11 19:17:09 pfSense kernel: pcib2: <acpi pci-pci="" bridge="">at device 30.0 on pci0
May 11 19:17:09 pfSense kernel: pci1: <acpi pci="" bus="">on pcib2
May 11 19:17:09 pfSense kernel: rl0: <d-link 10="" dfe-530tx+="" 100basetx="">port 0xd800-0xd8ff mem 0xfc9fec00-0xfc9fecff irq 3 at device 10.0 on pci1
May 11 19:17:09 pfSense kernel: miibus0: <mii bus="">on rl0
May 11 19:17:09 pfSense kernel: rlphy0: <realtek internal="" media="" interface="">PHY 0 on miibus0
May 11 19:17:09 pfSense kernel: rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
May 11 19:17:09 pfSense kernel: rl0: [ITHREAD]
May 11 19:17:09 pfSense kernel: xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xfc9ffc00-0xfc9ffc7f irq 9 at device 12.0 on pci1
May 11 19:17:09 pfSense kernel: miibus1: <mii bus="">on xl0
May 11 19:17:09 pfSense kernel: xlphy0: <3Com internal media interface> PHY 24 on miibus1
May 11 19:17:09 pfSense kernel: xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
May 11 19:17:09 pfSense kernel: xl0: [ITHREAD]
May 11 19:17:09 pfSense kernel: isab0: <pci-isa bridge="">at device 31.0 on pci0
May 11 19:17:09 pfSense kernel: isa0: <isa bus="">on isab0
May 11 19:17:09 pfSense kernel: atapci0: <intel ich2="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
May 11 19:17:09 pfSense kernel: ata0: <ata channel="">at channel 0 on atapci0
May 11 19:17:09 pfSense kernel: ata0: [ITHREAD]
May 11 19:17:09 pfSense kernel: ata1: <ata channel="">at channel 1 on atapci0
May 11 19:17:09 pfSense kernel: ata1: [ITHREAD]
May 11 19:17:09 pfSense kernel: uhci0: <intel 82801ba="" bam="" (ich2)="" usb="" controller="" usb-a="">port 0xef80-0xef9f irq 10 at device 31.2 on pci0
May 11 19:17:09 pfSense kernel: uhci0: [ITHREAD]
May 11 19:17:09 pfSense kernel: usbus0: <intel 82801ba="" bam="" (ich2)="" usb="" controller="" usb-a="">on uhci0
May 11 19:17:09 pfSense kernel: pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
May 11 19:17:09 pfSense kernel: atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
May 11 19:17:09 pfSense kernel: atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0
May 11 19:17:09 pfSense kernel: atkbd0: <at keyboard="">irq 1 on atkbdc0
May 11 19:17:09 pfSense kernel: kbd0 at atkbd0
May 11 19:17:09 pfSense kernel: atkbd0: [GIANT-LOCKED]
May 11 19:17:09 pfSense kernel: atkbd0: [ITHREAD]
May 11 19:17:09 pfSense kernel: fdc0: <floppy drive="" controller="">port 0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
May 11 19:17:09 pfSense kernel: fdc0: [FILTER]
May 11 19:17:09 pfSense kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
May 11 19:17:09 pfSense kernel: uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
May 11 19:17:09 pfSense kernel: uart0: [FILTER]
May 11 19:17:09 pfSense kernel: ppc0: <parallel port="">port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
May 11 19:17:09 pfSense kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
May 11 19:17:09 pfSense kernel: ppc0: FIFO with 16/16/8 bytes threshold
May 11 19:17:09 pfSense kernel: ppc0: [ITHREAD]
May 11 19:17:09 pfSense kernel: ppbus0: <parallel port="" bus="">on ppc0
May 11 19:17:09 pfSense kernel: plip0: <plip network="" interface="">on ppbus0
May 11 19:17:09 pfSense kernel: plip0: [ITHREAD]
May 11 19:17:09 pfSense kernel: lpt0: <printer>on ppbus0
May 11 19:17:09 pfSense kernel: lpt0: [ITHREAD]
May 11 19:17:09 pfSense kernel: lpt0: Interrupt-driven port
May 11 19:17:09 pfSense kernel: ppi0: <parallel i="" o="">on ppbus0
May 11 19:17:09 pfSense kernel: pmtimer0 on isa0
May 11 19:17:09 pfSense kernel: orm0: <isa option="" rom="">at iomem 0xc0000-0xcf7ff pnpid ORM0000 on isa0
May 11 19:17:09 pfSense kernel: sc0: <system console="">at flags 0x100 on isa0
May 11 19:17:09 pfSense kernel: sc0: VGA <16 virtual consoles, flags=0x300>
May 11 19:17:09 pfSense kernel: vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
May 11 19:17:09 pfSense kernel: Timecounter "TSC" frequency 730965571 Hz quality 800
May 11 19:17:09 pfSense kernel: Timecounters tick every 1.000 msec
May 11 19:17:09 pfSense kernel: IPsec: Initialized Security Association Processing.
May 11 19:17:09 pfSense kernel: usbus0: 12Mbps Full Speed USB v1.0
May 11 19:17:09 pfSense kernel: ad0: 19092MB <seagate st320011a="" 3.10="">at ata0-master UDMA100 
May 11 19:17:09 pfSense kernel: ugen0.1: <intel>at usbus0
May 11 19:17:09 pfSense kernel: uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
May 11 19:17:09 pfSense kernel: acd0: CDRW <lg cd-rw="" ced-8080b="" 1.04="">at ata1-master PIO4 
May 11 19:17:09 pfSense kernel: uhub0: 2 ports with 2 removable, self powered
May 11 19:17:09 pfSense kernel: ugen0.2: <microsoft>at usbus0
May 11 19:17:09 pfSense kernel: ukbd0: <microsoft 0="" 2="" microsoft="" digital="" media="" pro="" keyboard,="" class="" 0,="" rev="" 2.00="" 1.43,="" addr="">on usbus0
May 11 19:17:09 pfSense kernel: kbd2 at ukbd0
May 11 19:17:09 pfSense kernel: uhid0: <microsoft 0="" 2="" microsoft="" digital="" media="" pro="" keyboard,="" class="" 0,="" rev="" 2.00="" 1.43,="" addr="">on usbus0
May 11 19:17:09 pfSense kernel: Trying to mount root from ufs:/dev/ad0s1a
May 11 19:17:09 pfSense kernel: ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
May 11 19:17:09 pfSense kernel: add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
May 11 19:17:09 pfSense kernel: ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
May 11 19:17:09 pfSense kernel: Consider tuning vm.kmem_size and vm.kmem_size_max
May 11 19:17:09 pfSense kernel: in /boot/loader.conf.
May 11 19:17:09 pfSense kernel: ZFS filesystem version 5
May 11 19:17:09 pfSense kernel: ZFS storage pool version 28
May 11 19:17:11 pfSense check_reload_status: rc.newwanip starting rl0
May 11 19:17:11 pfSense php: : Accept router advertisements on interface rl0 
May 11 19:17:11 pfSense php: : Resyncing OpenVPN instances.
May 11 19:17:11 pfSense kernel: pflog0: promiscuous mode enabled
May 11 19:17:13 pfSense php: : Creating SSL Certificate for this host
May 11 19:17:13 pfSense dhcp6c[25574]: dhcp6_ctl_authinit: failed to open /usr/local/etc/dhcp6cctlkey: No such file or directory
May 11 19:17:13 pfSense dhcp6c[25574]: client6_init: failed initialize control message authentication
May 11 19:17:13 pfSense dhcp6c[25574]: client6_init: skip opening control port
May 11 19:17:15 pfSense php: : ROUTING: setting default route to 24.13.16.1
May 11 19:17:15 pfSense php: : ROUTING: setting IPv6 default route to fe80::201:5cff:fe3d:4e41%rl0
May 11 19:17:16 pfSense php: : rc.newwanip: Informational is starting rl0.
May 11 19:17:16 pfSense php: : rc.newwanip: on (IP address: 24.13.17.39) (interface: wan) (real interface: rl0).
May 11 19:17:16 pfSense php: : Accept router advertisements on interface rl0 
May 11 19:17:16 pfSense php: : ROUTING: setting default route to 24.13.16.1
May 11 19:17:16 pfSense php: : ROUTING: setting IPv6 default route to fe80::201:5cff:fe3d:4e41%rl0
May 11 19:17:16 pfSense dhcp6c[25749]: check_exit: exiting
May 11 19:17:17 pfSense dhcp6c[37331]: dhcp6_ctl_authinit: failed to open /usr/local/etc/dhcp6cctlkey: No such file or directory
May 11 19:17:17 pfSense dhcp6c[37331]: client6_init: failed initialize control message authentication
May 11 19:17:17 pfSense dhcp6c[37331]: client6_init: skip opening control port
May 11 19:17:17 pfSense check_reload_status: Updating all dyndns
May 11 19:17:19 pfSense php: : rc.newwanipv6: Informational is starting rl0.
May 11 19:17:22 pfSense php: : Creating rrd update script
May 11 19:17:22 pfSense syslogd: exiting on signal 15
May 11 19:17:22 pfSense syslogd: kernel boot file is /boot/kernel/kernel
May 11 19:17:23 pfSense php: : Resyncing OpenVPN instances for interface WAN.
May 11 19:17:23 pfSense php: : Creating rrd update script
May 11 19:17:23 pfSense php: : Restarting/Starting all packages.
May 11 19:17:24 pfSense php: : rc.newwanipv6: on (IP address: 2001:558:6033:ad:6d64:3d7c:77eb:cb90) (interface: wan) (real interface: rl0).
May 11 19:17:25 pfSense login: login on ttyv0 as root
May 11 19:17:25 pfSense sshlockout[76778]: sshlockout/webConfigurator v3.0 starting up
May 11 19:17:26 pfSense php: : pfSense package system has detected an ip change 0.0.0.0 ->  24.13.17.39 ... Restarting packages.
May 11 19:17:26 pfSense check_reload_status: Starting packages
May 11 19:17:26 pfSense check_reload_status: Reloading filter
May 11 19:17:26 pfSense php: : ROUTING: setting default route to 24.13.16.1
May 11 19:17:26 pfSense php: : ROUTING: setting IPv6 default route to fe80::201:5cff:fe3d:4e41%rl0
May 11 19:17:30 pfSense php: : Restarting/Starting all packages.
May 11 19:17:32 pfSense php: : Resyncing OpenVPN instances for interface WAN.
May 11 19:17:32 pfSense php: : Creating rrd update script
May 11 19:17:32 pfSense php: : pfSense package system has detected an ip change  ->  2001:558:6033:ad:6d64:3d7c:77eb:cb90 ... Restarting packages.
May 11 19:17:51 pfSense php: : Stopping all packages.
May 11 19:17:52 pfSense shutdown: power-down by root: 
May 11 19:17:52 pfSense shutdown: power-down by root: 
May 11 19:17:54 pfSense syslogd: exiting on signal 15
May 11 19:23:48 pfSense syslogd: kernel boot file is /boot/kernel/kernel
May 11 19:23:48 pfSense kernel: Copyright (c) 1992-2012 The FreeBSD Project.
May 11 19:23:48 pfSense kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
May 11 19:23:48 pfSense kernel: The Regents of the University of California. All rights reserved.
May 11 19:23:48 pfSense kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
May 11 19:23:48 pfSense kernel: FreeBSD 8.3-RELEASE-p8 #0: Thu May  9 07:29:43 EDT 2013
May 11 19:23:48 pfSense kernel: root@snapshots-8_3-i386.builders.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
May 11 19:23:48 pfSense kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
May 11 19:23:48 pfSense kernel: CPU: Intel Pentium III (730.97-MHz 686-class CPU)
May 11 19:23:48 pfSense kernel: Origin = "GenuineIntel"  Id = 0x683  Family = 6  Model = 8  Stepping = 3
May 11 19:23:48 pfSense kernel: Features=0x383f9ff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse>May 11 19:23:48 pfSense kernel: real memory  = 536870912 (512 MB)
May 11 19:23:48 pfSense kernel: avail memory = 501481472 (478 MB)
May 11 19:23:48 pfSense kernel: wlan: mac acl policy registered
May 11 19:23:48 pfSense kernel: ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
May 11 19:23:48 pfSense kernel: ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
May 11 19:23:48 pfSense kernel: module_register_init: MOD_LOAD (ipw_bss_fw, 0xc07baca0, 0) error 1
May 11 19:23:48 pfSense kernel: ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
May 11 19:23:48 pfSense kernel: ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
May 11 19:23:48 pfSense kernel: module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07bad40, 0) error 1
May 11 19:23:48 pfSense kernel: ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
May 11 19:23:48 pfSense kernel: ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
May 11 19:23:48 pfSense kernel: module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07bade0, 0) error 1
May 11 19:23:48 pfSense kernel: kbd1 at kbdmux0
May 11 19:23:48 pfSense kernel: cryptosoft0: <software crypto="">on motherboard
May 11 19:23:48 pfSense kernel: padlock0: No ACE support.
May 11 19:23:48 pfSense kernel: acpi0: <dell zuul="">on motherboard
May 11 19:23:48 pfSense kernel: acpi0: [ITHREAD]
May 11 19:23:48 pfSense kernel: acpi0: Power Button (fixed)
May 11 19:23:48 pfSense kernel: acpi0: reservation of 0, a0000 (3) failed
May 11 19:23:48 pfSense kernel: acpi0: reservation of 100000, 1ff00000 (3) failed
May 11 19:23:48 pfSense kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
May 11 19:23:48 pfSense kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
May 11 19:23:48 pfSense kernel: cpu0: <acpi cpu="">on acpi0
May 11 19:23:48 pfSense kernel: acpi_button0: <sleep button="">on acpi0
May 11 19:23:48 pfSense kernel: pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
May 11 19:23:48 pfSense kernel: pci0: <acpi pci="" bus="">on pcib0
May 11 19:23:48 pfSense kernel: agp0: <intel 82815="" (i815="" gmch)="" host="" to="" pci="" bridge="">on hostb0
May 11 19:23:48 pfSense kernel: pcib1: <pci-pci bridge="">at device 1.0 on pci0
May 11 19:23:48 pfSense kernel: pci2: <pci bus="">on pcib1
May 11 19:23:48 pfSense kernel: vgapci0: <vga-compatible display="">mem 0xfd000000-0xfdffffff,0xe0000000-0xefffffff irq 11 at device 0.0 on pci2
May 11 19:23:48 pfSense kernel: pcib2: <acpi pci-pci="" bridge="">at device 30.0 on pci0
May 11 19:23:48 pfSense kernel: pci1: <acpi pci="" bus="">on pcib2
May 11 19:23:48 pfSense kernel: rl0: <d-link 10="" dfe-530tx+="" 100basetx="">port 0xd800-0xd8ff mem 0xfc9fec00-0xfc9fecff irq 3 at device 10.0 on pci1
May 11 19:23:48 pfSense kernel: miibus0: <mii bus="">on rl0
May 11 19:23:48 pfSense kernel: rlphy0: <realtek internal="" media="" interface="">PHY 0 on miibus0
May 11 19:23:48 pfSense kernel: rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
May 11 19:23:48 pfSense kernel: rl0: [ITHREAD]
May 11 19:23:48 pfSense kernel: xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xfc9ffc00-0xfc9ffc7f irq 9 at device 12.0 on pci1
May 11 19:23:48 pfSense kernel: miibus1: <mii bus="">on xl0
May 11 19:23:48 pfSense kernel: xlphy0: <3Com internal media interface> PHY 24 on miibus1
May 11 19:23:48 pfSense kernel: xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
May 11 19:23:48 pfSense kernel: xl0: [ITHREAD]
May 11 19:23:48 pfSense kernel: isab0: <pci-isa bridge="">at device 31.0 on pci0
May 11 19:23:48 pfSense kernel: isa0: <isa bus="">on isab0
May 11 19:23:48 pfSense kernel: atapci0: <intel ich2="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
May 11 19:23:48 pfSense kernel: ata0: <ata channel="">at channel 0 on atapci0
May 11 19:23:48 pfSense kernel: ata0: [ITHREAD]
May 11 19:23:48 pfSense kernel: ata1: <ata channel="">at channel 1 on atapci0
May 11 19:23:48 pfSense kernel: ata1: [ITHREAD]
May 11 19:23:48 pfSense kernel: uhci0: <intel 82801ba="" bam="" (ich2)="" usb="" controller="" usb-a="">port 0xef80-0xef9f irq 10 at device 31.2 on pci0
May 11 19:23:48 pfSense kernel: uhci0: [ITHREAD]
May 11 19:23:48 pfSense kernel: usbus0: <intel 82801ba="" bam="" (ich2)="" usb="" controller="" usb-a="">on uhci0
May 11 19:23:48 pfSense kernel: pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
May 11 19:23:48 pfSense kernel: atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
May 11 19:23:48 pfSense kernel: atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0
May 11 19:23:48 pfSense kernel: atkbd0: <at keyboard="">irq 1 on atkbdc0
May 11 19:23:48 pfSense kernel: kbd0 at atkbd0
May 11 19:23:48 pfSense kernel: atkbd0: [GIANT-LOCKED]
May 11 19:23:48 pfSense kernel: atkbd0: [ITHREAD]
May 11 19:23:48 pfSense kernel: fdc0: <floppy drive="" controller="">port 0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
May 11 19:23:48 pfSense kernel: fdc0: [FILTER]
May 11 19:23:48 pfSense kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
May 11 19:23:48 pfSense kernel: uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
May 11 19:23:48 pfSense kernel: uart0: [FILTER]
May 11 19:23:48 pfSense kernel: ppc0: <parallel port="">port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
May 11 19:23:48 pfSense kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
May 11 19:23:48 pfSense kernel: ppc0: FIFO with 16/16/8 bytes threshold
May 11 19:23:48 pfSense kernel: ppc0: [ITHREAD]
May 11 19:23:48 pfSense kernel: ppbus0: <parallel port="" bus="">on ppc0
May 11 19:23:48 pfSense kernel: plip0: <plip network="" interface="">on ppbus0
May 11 19:23:48 pfSense kernel: plip0: [ITHREAD]
May 11 19:23:48 pfSense kernel: lpt0: <printer>on ppbus0
May 11 19:23:48 pfSense kernel: lpt0: [ITHREAD]
May 11 19:23:48 pfSense kernel: lpt0: Interrupt-driven port
May 11 19:23:48 pfSense kernel: ppi0: <parallel i="" o="">on ppbus0
May 11 19:23:48 pfSense kernel: pmtimer0 on isa0
May 11 19:23:48 pfSense kernel: orm0: <isa option="" rom="">at iomem 0xc0000-0xcf7ff pnpid ORM0000 on isa0
May 11 19:23:48 pfSense kernel: sc0: <system console="">at flags 0x100 on isa0
May 11 19:23:48 pfSense kernel: sc0: VGA <16 virtual consoles, flags=0x300>
May 11 19:23:48 pfSense kernel: vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
May 11 19:23:48 pfSense kernel: Timecounter "TSC" frequency 730965202 Hz quality 800
May 11 19:23:48 pfSense kernel: Timecounters tick every 1.000 msec
May 11 19:23:48 pfSense kernel: IPsec: Initialized Security Association Processing.
May 11 19:23:48 pfSense kernel: usbus0: 12Mbps Full Speed USB v1.0
May 11 19:23:48 pfSense kernel: ad0: 19092MB <seagate st320011a="" 3.10="">at ata0-master UDMA100 
May 11 19:23:48 pfSense kernel: ugen0.1: <intel>at usbus0
May 11 19:23:48 pfSense kernel: uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
May 11 19:23:48 pfSense kernel: acd0: CDRW <lg cd-rw="" ced-8080b="" 1.04="">at ata1-master PIO4 
May 11 19:23:48 pfSense kernel: uhub0: 2 ports with 2 removable, self powered
May 11 19:23:48 pfSense kernel: Trying to mount root from ufs:/dev/ad0s1a
May 11 19:23:48 pfSense kernel: ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
May 11 19:23:48 pfSense kernel: add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
May 11 19:23:48 pfSense kernel: ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
May 11 19:23:48 pfSense kernel: Consider tuning vm.kmem_size and vm.kmem_size_max
May 11 19:23:48 pfSense kernel: in /boot/loader.conf.
May 11 19:23:48 pfSense kernel: ZFS filesystem version 5
May 11 19:23:48 pfSense kernel: ZFS storage pool version 28
May 11 19:23:47 pfSense check_reload_status: Linkup starting rl0
May 11 19:23:49 pfSense check_reload_status: Linkup starting rl0
May 11 19:23:49 pfSense kernel: rl0: link state changed to UP
May 11 19:23:50 pfSense check_reload_status: rc.newwanip starting rl0
May 11 19:23:50 pfSense php: : Accept router advertisements on interface rl0 
May 11 19:23:51 pfSense kernel: xl0: link state changed to DOWN
May 11 19:23:51 pfSense check_reload_status: Linkup starting xl0
May 11 19:23:51 pfSense php: : Resyncing OpenVPN instances.
May 11 19:23:51 pfSense kernel: pflog0: promiscuous mode enabled
May 11 19:23:53 pfSense kernel: xl0: link state changed to UP
May 11 19:23:53 pfSense check_reload_status: Linkup starting xl0
May 11 19:23:53 pfSense dhcp6c[27441]: dhcp6_ctl_authinit: failed to open /usr/local/etc/dhcp6cctlkey: No such file or directory
May 11 19:23:53 pfSense dhcp6c[27441]: client6_init: failed initialize control message authentication
May 11 19:23:53 pfSense dhcp6c[27441]: client6_init: skip opening control port
May 11 19:23:54 pfSense php: : ROUTING: setting default route to 24.13.16.1
May 11 19:23:54 pfSense php: : ROUTING: setting IPv6 default route to fe80::201:5cff:fe3d:4e41%rl0
May 11 19:23:55 pfSense php: : rc.newwanipv6: Informational is starting rl0.
May 11 19:23:56 pfSense check_reload_status: Updating all dyndns
May 11 19:23:58 pfSense php: : rc.newwanip: Informational is starting rl0.
May 11 19:23:58 pfSense php: : rc.newwanip: on (IP address: 24.13.17.39) (interface: wan) (real interface: rl0).
May 11 19:23:58 pfSense php: : Accept router advertisements on interface rl0 
May 11 19:23:58 pfSense php: : ROUTING: setting default route to 24.13.16.1
May 11 19:23:58 pfSense php: : ROUTING: setting IPv6 default route to fe80::201:5cff:fe3d:4e41%rl0
May 11 19:24:00 pfSense dhcp6c[45098]: dhcp6_ctl_authinit: failed to open /usr/local/etc/dhcp6cctlkey: No such file or directory
May 11 19:24:00 pfSense dhcp6c[45098]: client6_init: failed initialize control message authentication
May 11 19:24:00 pfSense dhcp6c[45098]: client6_init: skip opening control port
May 11 19:24:00 pfSense php: : rc.newwanipv6: on (IP address: 2001:558:6033:ad:1d85:ae0c:46f6:3795) (interface: wan) (real interface: rl0).
May 11 19:24:01 pfSense php: : Creating rrd update script
May 11 19:24:03 pfSense syslogd: exiting on signal 15
May 11 19:24:03 pfSense syslogd: kernel boot file is /boot/kernel/kernel
May 11 19:24:04 pfSense php: : Restarting/Starting all packages.
May 11 19:24:04 pfSense php: : ROUTING: setting default route to 24.13.16.1
May 11 19:24:04 pfSense php: : ROUTING: setting IPv6 default route to fe80::201:5cff:fe3d:4e41%rl0
May 11 19:24:05 pfSense php: : The command '/sbin/ifconfig rl0 inet6 2001:558:6033:ad:6d64:3d7c:77eb:cb90 delete' returned exit code '1', the output was 'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address' 
May 11 19:24:05 pfSense check_reload_status: Reloading filter
May 11 19:24:06 pfSense login: login on ttyv0 as root
May 11 19:24:06 pfSense sshlockout[79697]: sshlockout/webConfigurator v3.0 starting up
May 11 19:24:06 pfSense php: : Resyncing OpenVPN instances for interface WAN.
May 11 19:24:06 pfSense php: : Creating rrd update script
May 11 19:24:09 pfSense php: : pfSense package system has detected an ip change 24.13.17.39 ->  24.13.17.39 ... Restarting packages.
May 11 19:24:09 pfSense check_reload_status: Starting packages
May 11 19:24:10 pfSense php: : Resyncing OpenVPN instances for interface WAN.
May 11 19:24:10 pfSense php: : Creating rrd update script
May 11 19:24:10 pfSense php: : pfSense package system has detected an ip change 2001:558:6033:ad:6d64:3d7c:77eb:cb90 ->  2001:558:6033:ad:1d85:ae0c:46f6:3795 ... Restarting packages.
May 11 19:24:11 pfSense dhcp6c[27599]: client6_recvadvert: XID mismatch
May 11 19:24:11 pfSense dhcp6c[27599]: client6_recvadvert: XID mismatch
May 11 19:24:11 pfSense dhcp6c[27599]: client6_recvadvert: XID mismatch
May 11 19:24:11 pfSense dhcp6c[27599]: client6_recvadvert: XID mismatch
May 11 19:24:11 pfSense dhcp6c[27599]: client6_recvadvert: XID mismatch
May 11 19:24:11 pfSense dhcp6c[27599]: client6_recvadvert: XID mismatch
May 11 19:24:11 pfSense dhcp6c[27599]: client6_recvadvert: XID mismatch
May 11 19:24:11 pfSense dhcp6c[27599]: client6_recvadvert: XID mismatch
May 11 19:24:11 pfSense dhcp6c[27599]: client6_recvreply: status code: success
May 11 19:24:11 pfSense php: : rc.newwanipv6: Informational is starting rl0.
May 11 19:24:13 pfSense php: : Restarting/Starting all packages.
May 11 19:24:16 pfSense php: : rc.newwanipv6: Failed to update wan IPv6, restarting...
May 11 19:24:16 pfSense dhcp6c[27599]: client6_recvreply: status code: success
May 11 19:24:17 pfSense php: : rc.newwanipv6: Informational is starting rl0.
May 11 19:24:22 pfSense php: : rc.newwanipv6: Failed to update wan IPv6, restarting...
May 11 19:24:22 pfSense dhcp6c[27599]: check_exit: exiting
May 11 19:24:54 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 11 19:24:54 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 11 19:24:58 pfSense check_reload_status: Syncing firewall
May 11 19:25:13 pfSense check_reload_status: Syncing firewall
May 11 19:25:25 pfSense check_reload_status: Syncing firewall
May 11 19:25:44 pfSense check_reload_status: Syncing firewall
May 11 19:25:53 pfSense php: /wizard.php: Clearing states to old gateway 24.13.16.1.
May 11 19:25:53 pfSense check_reload_status: rc.newwanip starting rl0
May 11 19:25:53 pfSense php: /wizard.php: Accept router advertisements on interface rl0 
May 11 19:25:53 pfSense dhcp6c[47978]: dhcp6_ctl_authinit: failed to open /usr/local/etc/dhcp6cctlkey: No such file or directory
May 11 19:25:53 pfSense dhcp6c[47978]: client6_init: failed initialize control message authentication
May 11 19:25:53 pfSense dhcp6c[47978]: client6_init: skip opening control port
May 11 19:25:55 pfSense php: /wizard.php: Shutting down Router Advertisment daemon cleanly
May 11 19:25:55 pfSense check_reload_status: Reloading all
May 11 19:25:55 pfSense root: rc.update_bogons.sh is starting up.
May 11 19:25:55 pfSense root: rc.update_bogons.sh is beginning the update cycle.
May 11 19:25:57 pfSense php: : rc.newwanip: Informational is starting rl0.
May 11 19:25:57 pfSense php: : rc.newwanip: on (IP address: 24.13.17.39) (interface: wan) (real interface: rl0).
May 11 19:25:57 pfSense php: : Accept router advertisements on interface rl0 
May 11 19:25:58 pfSense root: Bogons V4 file downloaded: 4912 addresses added.
May 11 19:25:58 pfSense root: Bogons V4 file downloaded: 6 addresses deleted.
May 11 19:26:00 pfSense root: Bogons V6 file downloaded: 74425 addresses added.
May 11 19:26:00 pfSense root: rc.update_bogons.sh is ending the update cycle.
May 11 19:26:00 pfSense php: : ROUTING: setting default route to 24.13.16.1
May 11 19:26:00 pfSense php: : ROUTING: setting IPv6 default route to fe80::201:5cff:fe3d:4e41%rl0
May 11 19:26:02 pfSense php: : rc.reload_all: Reloading all configuration settings.
May 11 19:26:03 pfSense dhcp6c[48244]: check_exit: exiting
May 11 14:26:03 pfSense dhcp6c[74998]: dhcp6_ctl_authinit: failed to open /usr/local/etc/dhcp6cctlkey: No such file or directory
May 11 14:26:03 pfSense dhcp6c[74998]: client6_init: failed initialize control message authentication
May 11 14:26:03 pfSense dhcp6c[74998]: client6_init: skip opening control port
May 11 19:26:05 pfSense kernel: arpresolve: can't allocate llinfo for 24.13.16.1
May 11 19:26:05 pfSense kernel: arpresolve: can't allocate llinfo for 24.13.16.1
May 11 19:26:05 pfSense kernel: arpresolve: can't allocate llinfo for 24.13.16.1
May 11 19:26:05 pfSense kernel: arpresolve: can't allocate llinfo for 24.13.16.1
May 11 19:26:05 pfSense kernel: arpresolve: can't allocate llinfo for 24.13.16.1
May 11 19:26:05 pfSense kernel: arpresolve: can't allocate llinfo for 24.13.16.1
May 11 19:26:05 pfSense check_reload_status: rc.newwanip starting rl0
May 11 19:26:05 pfSense php: : Accept router advertisements on interface rl0 
May 11 19:26:05 pfSense php: : ROUTING: setting default route to 24.13.16.1
May 11 19:26:05 pfSense php: : ROUTING: setting IPv6 default route to fe80::201:5cff:fe3d:4e41%rl0
May 11 14:26:06 pfSense dhcp6c[75337]: check_exit: exiting
May 11 14:26:06 pfSense dhcp6c[87246]: dhcp6_ctl_authinit: failed to open /usr/local/etc/dhcp6cctlkey: No such file or directory
May 11 14:26:06 pfSense dhcp6c[87246]: client6_init: failed initialize control message authentication
May 11 14:26:06 pfSense dhcp6c[87246]: client6_init: skip opening control port
May 11 19:26:07 pfSense php: : Resyncing OpenVPN instances for interface WAN.
May 11 19:26:07 pfSense php: : Creating rrd update script
May 11 19:26:09 pfSense php: : pfSense package system has detected an ip change 24.13.17.39 ->  24.13.17.39 ... Restarting packages.
May 11 19:26:09 pfSense check_reload_status: Starting packages
May 11 19:26:09 pfSense check_reload_status: Reloading filter
May 11 14:26:09 pfSense php: : rc.newwanip: Informational is starting rl0.
May 11 14:26:09 pfSense php: : rc.newwanip: on (IP address: 24.13.17.39) (interface: wan) (real interface: rl0).
May 11 14:26:09 pfSense php: : Accept router advertisements on interface rl0 
May 11 14:26:09 pfSense php: : ROUTING: setting default route to 24.13.16.1
May 11 14:26:09 pfSense php: : ROUTING: setting IPv6 default route to fe80::201:5cff:fe3d:4e41%rl0
May 11 14:26:09 pfSense dhcp6c[87546]: check_exit: exiting
May 11 14:26:09 pfSense dhcp6c[10584]: dhcp6_ctl_authinit: failed to open /usr/local/etc/dhcp6cctlkey: No such file or directory
May 11 14:26:09 pfSense dhcp6c[10584]: client6_init: failed initialize control message authentication
May 11 14:26:09 pfSense dhcp6c[10584]: client6_init: skip opening control port
May 11 19:26:11 pfSense check_reload_status: updating dyndns wan
May 11 14:26:14 pfSense php: : Restarting/Starting all packages.
May 11 14:26:15 pfSense php: : Resyncing OpenVPN instances for interface WAN.
May 11 14:26:15 pfSense php: : Creating rrd update script
May 11 19:26:17 pfSense dhcp6c[45237]: client6_recvadvert: XID mismatch
May 11 19:26:17 pfSense dhcp6c[45237]: client6_recvadvert: XID mismatch
May 11 14:26:18 pfSense php: : pfSense package system has detected an ip change 24.13.17.39 ->  24.13.17.39 ... Restarting packages.
May 11 19:26:18 pfSense php: : ROUTING: setting default route to 24.13.16.1
May 11 19:26:18 pfSense php: : ROUTING: setting IPv6 default route to fe80::201:5cff:fe3d:4e41%rl0
May 11 19:26:18 pfSense check_reload_status: updating dyndns lan
May 11 19:26:19 pfSense dhcp6c[45237]: client6_recvadvert: XID mismatch
May 11 19:26:26 pfSense php: : NTPD is starting up.
May 11 19:26:26 pfSense check_reload_status: starting sshd
May 11 19:26:26 pfSense check_reload_status: webConfigurator restart in progress
May 11 19:26:26 pfSense dhcp6c[45237]: client6_recvadvert: XID mismatch
May 11 19:26:26 pfSense dhcp6c[45237]: client6_recvadvert: XID mismatch
May 11 19:26:28 pfSense php: : rc.reload_all: Reloading filter configuration.
May 11 14:26:33 pfSense php: : Creating rrd update script
May 11 14:26:35 pfSense php: : rc.newwanipv6: Informational is starting rl0.
May 11 14:26:40 pfSense php: : rc.newwanipv6: on (IP address: 2001:558:6033:ad:1d85:ae0c:46f6:3795) (interface: wan) (real interface: rl0).
May 11 14:26:41 pfSense php: : ROUTING: setting default route to 24.13.16.1
May 11 14:26:41 pfSense php: : ROUTING: setting IPv6 default route to fe80::201:5cff:fe3d:4e41%rl0
May 11 19:26:42 pfSense check_reload_status: Reloading filter
May 11 19:26:43 pfSense dhcp6c[45237]: client6_recvadvert: XID mismatch
May 11 19:26:43 pfSense dhcp6c[45237]: client6_recvadvert: XID mismatch
May 11 19:29:27 pfSense check_reload_status: Syncing firewall
May 11 19:29:52 pfSense check_reload_status: Syncing firewall
May 11 19:42:47 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 11 19:42:47 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 11 19:44:15 pfSense kernel: pflog0: promiscuous mode disabled
May 13 07:37:30 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 13 07:37:30 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 13 10:40:12 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 13 10:40:12 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 13 17:21:41 pfSense check_reload_status: updating dyndns WAN_DHCP
May 13 17:21:41 pfSense check_reload_status: Restarting ipsec tunnels
May 13 17:21:41 pfSense check_reload_status: Restarting OpenVPN tunnels/interfaces
May 13 17:21:41 pfSense check_reload_status: Reloading filter
May 13 17:21:46 pfSense kernel: pflog0: promiscuous mode enabled
May 13 17:21:51 pfSense check_reload_status: updating dyndns WAN_DHCP
May 13 17:21:51 pfSense check_reload_status: Restarting ipsec tunnels
May 13 17:21:51 pfSense check_reload_status: Restarting OpenVPN tunnels/interfaces
May 13 17:21:51 pfSense check_reload_status: Reloading filter
May 14 00:14:44 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 14 00:14:44 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 14 21:37:10 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 14 21:37:10 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 15 00:21:52 pfSense dhcp6c[45237]: client6_timo: all information to be updated was canceled
May 15 00:24:13 pfSense dhcp6c[45237]: client6_timo: all information to be updated was canceled
May 15 10:23:02 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 15 10:23:02 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 15 19:31:43 pfSense dhcp6c[45237]: client6_timo: all information to be updated was canceled
May 15 19:33:19 pfSense dhcp6c[45237]: client6_timo: all information to be updated was canceled
May 15 23:27:53 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 15 23:27:53 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 17 01:54:46 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 17 01:54:46 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 17 01:54:58 pfSense php: /reboot.php: Stopping all packages.
May 16 20:55:00 pfSense shutdown: reboot by root: 
May 16 20:55:00 pfSense shutdown: reboot by root: 
May 17 01:55:02 pfSense syslogd: exiting on signal 15
May 16 20:58:23 pfSense syslogd: kernel boot file is /boot/kernel/kernel
May 16 20:58:24 pfSense kernel: Waiting (max 60 seconds) for system process `vnlru' to stop...done
May 16 20:58:24 pfSense kernel: Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
May 16 20:58:24 pfSense kernel: Waiting (max 60 seconds) for system process `syncer' to stop...
May 16 20:58:24 pfSense kernel: Syncing disks, vnodes remaining...0 done
May 16 20:58:24 pfSense kernel: All buffers synced.
May 16 20:58:24 pfSense kernel: Uptime: 5d6h32m37s
May 16 20:58:24 pfSense kernel: usbus0: Controller shutdown
May 16 20:58:24 pfSense kernel: uhub0: at usbus0, port 1, addr 1 (disconnected)
May 16 20:58:24 pfSense kernel: usbus0: Controller shutdown complete
May 16 20:58:24 pfSense kernel: Rebooting...
May 16 20:58:24 pfSense kernel: Copyright (c) 1992-2012 The FreeBSD Project.
May 16 20:58:24 pfSense kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
May 16 20:58:24 pfSense kernel: The Regents of the University of California. All rights reserved.
May 16 20:58:24 pfSense kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
May 16 20:58:24 pfSense kernel: FreeBSD 8.3-RELEASE-p8 #0: Thu May  9 07:29:43 EDT 2013
May 16 20:58:24 pfSense kernel: root@snapshots-8_3-i386.builders.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_SMP.8 i386
May 16 20:58:24 pfSense kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
May 16 20:58:24 pfSense kernel: CPU: Intel Pentium III (730.97-MHz 686-class CPU)
May 16 20:58:24 pfSense kernel: Origin = "GenuineIntel"  Id = 0x683  Family = 6  Model = 8  Stepping = 3
May 16 20:58:24 pfSense kernel: Features=0x383f9ff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse>May 16 20:58:24 pfSense kernel: real memory  = 536870912 (512 MB)
May 16 20:58:24 pfSense kernel: avail memory = 501481472 (478 MB)
May 16 20:58:24 pfSense kernel: wlan: mac acl policy registered
May 16 20:58:24 pfSense kernel: ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
May 16 20:58:24 pfSense kernel: ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
May 16 20:58:24 pfSense kernel: module_register_init: MOD_LOAD (ipw_bss_fw, 0xc07baca0, 0) error 1
May 16 20:58:24 pfSense kernel: ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
May 16 20:58:24 pfSense kernel: ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
May 16 20:58:24 pfSense kernel: module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc07bad40, 0) error 1
May 16 20:58:24 pfSense kernel: ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
May 16 20:58:24 pfSense kernel: ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
May 16 20:58:24 pfSense kernel: module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc07bade0, 0) error 1
May 16 20:58:24 pfSense kernel: kbd1 at kbdmux0
May 16 20:58:24 pfSense kernel: cryptosoft0: <software crypto="">on motherboard
May 16 20:58:24 pfSense kernel: padlock0: No ACE support.
May 16 20:58:24 pfSense kernel: acpi0: <dell zuul="">on motherboard
May 16 20:58:24 pfSense kernel: acpi0: [ITHREAD]
May 16 20:58:24 pfSense kernel: acpi0: Power Button (fixed)
May 16 20:58:24 pfSense kernel: acpi0: reservation of 0, a0000 (3) failed
May 16 20:58:24 pfSense kernel: acpi0: reservation of 100000, 1ff00000 (3) failed
May 16 20:58:24 pfSense kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
May 16 20:58:24 pfSense kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
May 16 20:58:24 pfSense kernel: cpu0: <acpi cpu="">on acpi0
May 16 20:58:24 pfSense kernel: acpi_button0: <sleep button="">on acpi0
May 16 20:58:24 pfSense kernel: pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
May 16 20:58:24 pfSense kernel: pci0: <acpi pci="" bus="">on pcib0
May 16 20:58:24 pfSense kernel: agp0: <intel 82815="" (i815="" gmch)="" host="" to="" pci="" bridge="">on hostb0
May 16 20:58:24 pfSense kernel: pcib1: <pci-pci bridge="">at device 1.0 on pci0
May 16 20:58:24 pfSense kernel: pci2: <pci bus="">on pcib1
May 16 20:58:24 pfSense kernel: vgapci0: <vga-compatible display="">mem 0xfd000000-0xfdffffff,0xe0000000-0xefffffff irq 11 at device 0.0 on pci2
May 16 20:58:24 pfSense kernel: pcib2: <acpi pci-pci="" bridge="">at device 30.0 on pci0
May 16 20:58:24 pfSense kernel: pci1: <acpi pci="" bus="">on pcib2
May 16 20:58:24 pfSense kernel: rl0: <d-link 10="" dfe-530tx+="" 100basetx="">port 0xd800-0xd8ff mem 0xfc9fec00-0xfc9fecff irq 3 at device 10.0 on pci1
May 16 20:58:24 pfSense kernel: miibus0: <mii bus="">on rl0
May 16 20:58:24 pfSense kernel: rlphy0: <realtek internal="" media="" interface="">PHY 0 on miibus0
May 16 20:58:24 pfSense kernel: rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
May 16 20:58:24 pfSense kernel: rl0: [ITHREAD]
May 16 20:58:24 pfSense kernel: xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xfc9ffc00-0xfc9ffc7f irq 9 at device 12.0 on pci1
May 16 20:58:24 pfSense kernel: miibus1: <mii bus="">on xl0
May 16 20:58:24 pfSense kernel: xlphy0: <3Com internal media interface> PHY 24 on miibus1
May 16 20:58:24 pfSense kernel: xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
May 16 20:58:24 pfSense kernel: xl0: [ITHREAD]
May 16 20:58:24 pfSense kernel: isab0: <pci-isa bridge="">at device 31.0 on pci0
May 16 20:58:24 pfSense kernel: isa0: <isa bus="">on isab0
May 16 20:58:24 pfSense kernel: atapci0: <intel ich2="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
May 16 20:58:24 pfSense kernel: ata0: <ata channel="">at channel 0 on atapci0
May 16 20:58:24 pfSense kernel: ata0: [ITHREAD]
May 16 20:58:24 pfSense kernel: ata1: <ata channel="">at channel 1 on atapci0
May 16 20:58:24 pfSense kernel: ata1: [ITHREAD]
May 16 20:58:24 pfSense kernel: uhci0: <intel 82801ba="" bam="" (ich2)="" usb="" controller="" usb-a="">port 0xef80-0xef9f irq 10 at device 31.2 on pci0
May 16 20:58:24 pfSense kernel: uhci0: [ITHREAD]
May 16 20:58:24 pfSense kernel: usbus0: <intel 82801ba="" bam="" (ich2)="" usb="" controller="" usb-a="">on uhci0
May 16 20:58:24 pfSense kernel: pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
May 16 20:58:24 pfSense kernel: atrtc0: <at realtime="" clock="">port 0x70-0x71 irq 8 on acpi0
May 16 20:58:24 pfSense kernel: atkbdc0: <keyboard controller="" (i8042)="">port 0x60,0x64 irq 1 on acpi0
May 16 20:58:24 pfSense kernel: atkbd0: <at keyboard="">irq 1 on atkbdc0
May 16 20:58:24 pfSense kernel: kbd0 at atkbd0
May 16 20:58:24 pfSense kernel: atkbd0: [GIANT-LOCKED]
May 16 20:58:24 pfSense kernel: atkbd0: [ITHREAD]
May 16 20:58:24 pfSense kernel: fdc0: <floppy drive="" controller="">port 0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
May 16 20:58:24 pfSense kernel: fdc0: [FILTER]
May 16 20:58:24 pfSense kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
May 16 20:58:24 pfSense kernel: uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
May 16 20:58:24 pfSense kernel: uart0: [FILTER]
May 16 20:58:24 pfSense kernel: ppc0: <parallel port="">port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
May 16 20:58:24 pfSense kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
May 16 20:58:24 pfSense kernel: ppc0: FIFO with 16/16/8 bytes threshold
May 16 20:58:24 pfSense kernel: ppc0: [ITHREAD]
May 16 20:58:24 pfSense kernel: ppbus0: <parallel port="" bus="">on ppc0
May 16 20:58:24 pfSense kernel: plip0: <plip network="" interface="">on ppbus0
May 16 20:58:24 pfSense kernel: plip0: [ITHREAD]
May 16 20:58:24 pfSense kernel: lpt0: <printer>on ppbus0
May 16 20:58:24 pfSense kernel: lpt0: [ITHREAD]
May 16 20:58:24 pfSense kernel: lpt0: Interrupt-driven port
May 16 20:58:24 pfSense kernel: ppi0: <parallel i="" o="">on ppbus0
May 16 20:58:24 pfSense kernel: pmtimer0 on isa0
May 16 20:58:24 pfSense kernel: orm0: <isa option="" rom="">at iomem 0xc0000-0xcf7ff pnpid ORM0000 on isa0
May 16 20:58:24 pfSense kernel: sc0: <system console="">at flags 0x100 on isa0
May 16 20:58:24 pfSense kernel: sc0: VGA <16 virtual consoles, flags=0x300>
May 16 20:58:24 pfSense kernel: vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
May 16 20:58:24 pfSense kernel: Timecounter "TSC" frequency 730966814 Hz quality 800
May 16 20:58:24 pfSense kernel: Timecounters tick every 1.000 msec
May 16 20:58:24 pfSense kernel: IPsec: Initialized Security Association Processing.
May 16 20:58:24 pfSense kernel: usbus0: 12Mbps Full Speed USB v1.0
May 16 20:58:24 pfSense kernel: ad0: 19092MB <seagate st320011a="" 3.10="">at ata0-master UDMA100 
May 16 20:58:24 pfSense kernel: ugen0.1: <intel>at usbus0
May 16 20:58:24 pfSense kernel: uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usbus0
May 16 20:58:24 pfSense kernel: acd0: CDRW <lg cd-rw="" ced-8080b="" 1.04="">at ata1-master PIO4 
May 16 20:58:24 pfSense kernel: uhub0: 2 ports with 2 removable, self powered
May 16 20:58:24 pfSense kernel: Trying to mount root from ufs:/dev/ad0s1a
May 16 20:58:24 pfSense kernel: ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
May 16 20:58:24 pfSense kernel: add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
May 16 20:58:24 pfSense kernel: ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
May 16 20:58:24 pfSense kernel: Consider tuning vm.kmem_size and vm.kmem_size_max
May 16 20:58:24 pfSense kernel: in /boot/loader.conf.
May 16 20:58:24 pfSense kernel: ZFS filesystem version 5
May 16 20:58:24 pfSense kernel: ZFS storage pool version 28
May 16 20:58:23 pfSense check_reload_status: Linkup starting rl0
May 16 20:58:25 pfSense check_reload_status: Linkup starting rl0
May 16 20:58:25 pfSense kernel: rl0: link state changed to UP
May 16 20:58:26 pfSense check_reload_status: rc.newwanip starting rl0
May 16 20:58:26 pfSense php: : Accept router advertisements on interface rl0 
May 16 20:58:26 pfSense check_reload_status: Linkup starting xl0
May 16 20:58:26 pfSense kernel: xl0: link state changed to DOWN
May 16 20:58:26 pfSense php: : Resyncing OpenVPN instances.
May 16 20:58:26 pfSense kernel: pflog0: promiscuous mode enabled
May 16 20:58:27 pfSense dhcp6c[23403]: dhcp6_ctl_authinit: failed to open /usr/local/etc/dhcp6cctlkey: No such file or directory
May 16 20:58:27 pfSense dhcp6c[23403]: client6_init: failed initialize control message authentication
May 16 20:58:27 pfSense dhcp6c[23403]: client6_init: skip opening control port
May 16 20:58:28 pfSense kernel: xl0: link state changed to UP
May 16 20:58:29 pfSense check_reload_status: Linkup starting xl0
May 16 20:58:29 pfSense php: : rc.newwanipv6: Informational is starting rl0.
May 16 20:58:32 pfSense php: : ROUTING: setting default route to 24.13.16.1
May 16 20:58:32 pfSense php: : ROUTING: setting IPv6 default route to fe80::201:5cff:fe3d:4e41%rl0
May 16 20:58:33 pfSense check_reload_status: Updating all dyndns
May 16 20:58:34 pfSense php: : rc.newwanipv6: on (IP address: 2001:558:6033:ad:1d85:ae0c:46f6:3795) (interface: wan) (real interface: rl0).
May 16 20:58:36 pfSense php: : ROUTING: setting default route to 24.13.16.1
May 16 20:58:36 pfSense php: : ROUTING: setting IPv6 default route to fe80::201:5cff:fe3d:4e41%rl0
May 16 20:58:37 pfSense php: : rc.newwanip: Informational is starting rl0.
May 16 20:58:37 pfSense php: : rc.newwanip: on (IP address: 24.13.17.39) (interface: wan) (real interface: rl0).
May 16 20:58:37 pfSense php: : Accept router advertisements on interface rl0 
May 16 20:58:37 pfSense php: : ROUTING: setting default route to 24.13.16.1
May 16 20:58:37 pfSense check_reload_status: Reloading filter
May 16 20:58:37 pfSense php: : ROUTING: setting IPv6 default route to fe80::201:5cff:fe3d:4e41%rl0
May 16 20:58:37 pfSense dhcp6c[54670]: dhcp6_ctl_authinit: failed to open /usr/local/etc/dhcp6cctlkey: No such file or directory
May 16 20:58:37 pfSense dhcp6c[54670]: client6_init: failed initialize control message authentication
May 16 20:58:37 pfSense dhcp6c[54670]: client6_init: skip opening control port
May 16 20:58:42 pfSense php: : Creating rrd update script
May 16 20:58:42 pfSense syslogd: exiting on signal 15
May 16 20:58:42 pfSense syslogd: kernel boot file is /boot/kernel/kernel
May 16 20:58:43 pfSense php: : Restarting/Starting all packages.
May 16 20:58:44 pfSense login: login on ttyv0 as root
May 16 20:58:44 pfSense sshlockout[82312]: sshlockout/webConfigurator v3.0 starting up
May 16 20:58:45 pfSense php: : Resyncing OpenVPN instances for interface WAN.
May 16 20:58:45 pfSense php: : Creating rrd update script
May 16 20:58:47 pfSense dhcp6c[23571]: client6_recvadvert: XID mismatch
May 16 20:58:47 pfSense lighttpd[30891]: (connections.c.305) SSL: 1 error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol 
May 16 20:58:47 pfSense dhcp6c[23571]: client6_recvadvert: XID mismatch
May 16 20:58:47 pfSense php: : pfSense package system has detected an ip change 24.13.17.39 ->  24.13.17.39 ... Restarting packages.
May 16 20:58:47 pfSense check_reload_status: Starting packages
May 16 20:58:51 pfSense php: : Restarting/Starting all packages.
May 16 20:59:05 pfSense dhcp6c[23571]: client6_timo: no responses were received
May 16 20:59:08 pfSense dhcp6c[23571]: client6_timo: no responses were received
May 16 20:59:08 pfSense dhcp6c[23571]: check_exit: exiting
May 16 20:59:12 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 16 20:59:12 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 25 08:03:50 pfSense check_reload_status: updating dyndns WAN_DHCP,WAN_DHCP6
May 25 08:03:50 pfSense check_reload_status: Restarting ipsec tunnels
May 25 08:03:50 pfSense check_reload_status: Restarting OpenVPN tunnels/interfaces
May 25 08:03:50 pfSense check_reload_status: Reloading filter
May 28 23:44:59 pfSense check_reload_status: updating dyndns WAN_DHCP,WAN_DHCP6
May 28 23:44:59 pfSense check_reload_status: Restarting ipsec tunnels
May 28 23:44:59 pfSense check_reload_status: Restarting OpenVPN tunnels/interfaces
May 28 23:44:59 pfSense check_reload_status: Reloading filter
May 28 23:45:13 pfSense check_reload_status: updating dyndns WAN_DHCP6,WAN_DHCP
May 28 23:45:13 pfSense check_reload_status: Restarting ipsec tunnels
May 28 23:45:13 pfSense check_reload_status: Restarting OpenVPN tunnels/interfaces
May 28 23:45:13 pfSense check_reload_status: Reloading filter
May 29 01:36:40 pfSense check_reload_status: updating dyndns WAN_DHCP
May 29 01:36:40 pfSense check_reload_status: Restarting ipsec tunnels
May 29 01:36:40 pfSense check_reload_status: Restarting OpenVPN tunnels/interfaces
May 29 01:36:40 pfSense check_reload_status: Reloading filter
May 29 16:28:21 pfSense kernel: ugen0.2: <microsoft>at usbus0
May 29 16:28:21 pfSense kernel: ukbd0: <microsoft 0="" 2="" microsoft="" digital="" media="" pro="" keyboard,="" class="" 0,="" rev="" 2.00="" 1.43,="" addr="">on usbus0
May 29 16:28:21 pfSense kernel: kbd2 at ukbd0
May 29 16:28:21 pfSense kernel: uhid0: <microsoft 0="" 2="" microsoft="" digital="" media="" pro="" keyboard,="" class="" 0,="" rev="" 2.00="" 1.43,="" addr="">on usbus0
May 29 16:29:33 pfSense kernel: ugen0.2: <microsoft>at usbus0 (disconnected)
May 29 16:29:33 pfSense kernel: ukbd0: at uhub0, port 2, addr 2 (disconnected)
May 29 16:29:34 pfSense kernel: uhid0: at uhub0, port 2, addr 2 (disconnected)
May 29 16:30:34 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103
May 29 16:30:34 pfSense php: /index.php: Successful login for user 'admin' from: 192.168.1.103</microsoft></microsoft></microsoft></microsoft></lg></intel></intel></seagate></generic></system></isa></parallel></printer></plip></parallel></parallel></floppy></at></keyboard></at></serial></intel></intel></ata></ata></intel></isa></pci-isa></mii></realtek></mii></d-link></acpi></acpi></vga-compatible></pci></pci-pci></intel></acpi></acpi></sleep></acpi></dell></software></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse></lg></intel></intel></seagate></generic></system></isa></parallel></printer></plip></parallel></parallel></floppy></at></keyboard></at></serial></intel></intel></ata></ata></intel></isa></pci-isa></mii></realtek></mii></d-link></acpi></acpi></vga-compatible></pci></pci-pci></intel></acpi></acpi></sleep></acpi></dell></software></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse></microsoft></microsoft></microsoft></lg></intel></intel></seagate></generic></system></isa></parallel></printer></plip></parallel></parallel></floppy></at></keyboard></at></serial></intel></intel></ata></ata></intel></isa></pci-isa></mii></realtek></mii></d-link></acpi></acpi></vga-compatible></pci></pci-pci></intel></acpi></acpi></sleep></acpi></dell></software></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse></microsoft>

            This evening, I will reboot my modem, and my pfSense server, so that I can get IPv6 working again.  Once it stops in 4 days, I'll run the above command again to help isolate the issue.

            @wallabybob:

            Any reports from radvd (output from pfSense shell command```
            clog /var/log/system.log | grep radvd

            I ran that command, but it did not return anything at all.

            By the way, when I say "run these commands", I did so from the "Diagnostics" menu, and then "command prompt" screen.  I used the "Execute Shell command" for both of these.

            If there is anything else that may be needed, please let me know and I'll provide it.

            Thanks,

            –Brian

            ============================
            – Brian Plencner

            E-Mail: CoasterBrian72Cancer@gmail.com
            Note: Kill Cancer to Reply via e-mail

            1 Reply Last reply Reply Quote 0
            • jimpJ
              jimp Rebel Alliance Developer Netgate
              last edited by

              FYI- radvd logs to /var/log/routing.log, not system.log

              Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

              Need help fast? Netgate Global Support!

              Do not Chat/PM for help!

              1 Reply Last reply Reply Quote 0
              • B
                BrianPlencner
                last edited by

                @jimp:

                FYI- radvd logs to /var/log/routing.log, not system.log

                No problem.  Probably just a simple mistake on the person who told me to run the command.

                So, I've modified the command, and now I have this

                
$ clog /var/log/routing.log | grep radvd
May 29 23:02:10 pfSense radvd[83396]: version 1.9.1 started
May 29 23:05:10 pfSense radvd[83774]: Exiting, sigterm or sigint received.
May 29 23:05:10 pfSense radvd[83774]: sending stop adverts
May 29 23:05:10 pfSense radvd[83774]: removing /var/run/radvd.pid

                I know why the service is gone, as it said it removed it!  Of course, why it got removed I have no idea.

                –Brian

                ============================
                – Brian Plencner

                E-Mail: CoasterBrian72Cancer@gmail.com
                Note: Kill Cancer to Reply via e-mail

                1 Reply Last reply Reply Quote 0
                • P
                  priller
                  last edited by

                  @priller:

                  OK, count me in.  I loaded m0n0wall (1.8.1b540) on a new VM.  Just for the curiosity of seeing it survive the Comcast Day-4 DHCPv6 lease expiration problem that pfSense has.

                  I can confirm that m0n0wall renews properly.  Perhaps the teams can collaborate to see what is different and how it can be incorporated into pfSense. Please!

                  1 Reply Last reply Reply Quote 0
                  • P
                    priller
                    last edited by

                    @BrianPlencner:

                    I know why the service is gone, as it said it removed it!  Of course, why it got removed I have no idea.

                    From what I have seen, radvd stops after the IPv6 addressing is lost due to the renewal problem carried on this bug:  http://redmine.pfsense.org/issues/2919

                    I see radvd stopping as being "collateral damage".  It's not the initial trigger of the problem.

                    1 Reply Last reply Reply Quote 0
                    • E
                      eri--
                      last edited by

                      Can any of you run dhcp6c with -d -D options to have the logging of what is happening and paste that here?

                      That would explain what is happening here.
                      The diff is something liek this

                      
diff --git a/etc/inc/interfaces.inc b/etc/inc/interfaces.inc
index 9b97131..69aed12 100644
--- a/etc/inc/interfaces.inc
+++ b/etc/inc/interfaces.inc
@@ -3483,7 +3483,7 @@ function interface_dhcpv6_configure($interface = "wan", $wancfg) {
        $rtsoldscript .= "if [ -f {$g['varrun_path']}/dhcp6c_{$wanif}.pid ]; then\n";
        $rtsoldscript .= "\t/bin/pkill -F {$g['varrun_path']}/dhcp6c_{$wanif}.pid\n";
        $rtsoldscript .= "fi\n";
-       $rtsoldscript .= "/usr/local/sbin/dhcp6c -d -c {$g['varetc_path']}/dhcp6c_{$interface}.conf -p {$g['varrun_path']}/dhcp6c_{$wanif}.pid {$wanif}\n";
+       $rtsoldscript .= "/usr/local/sbin/dhcp6c -d -D -c {$g['varetc_path']}/dhcp6c_{$interface}.conf -p {$g['varrun_path']}/dhcp6c_{$wanif}.pid {$wanif}\n";
        /* Add wide-dhcp6c shell script here. Because we can not pass a argument to it. */
        if (!@file_put_contents("{$g['varetc_path']}/rtsold_{$wanif}_script.sh", $rtsoldscript)) {
                printf("Error: cannot open rtsold_{$interface}_script.sh in interface_dhcpv6_configure() for writing.\n");
                      1 Reply Last reply Reply Quote 0
                      • P
                        priller
                        last edited by

                        @ermal:

                        Can any of you run dhcp6c with -d -D options to have the logging of what is happening and paste that here?

                        Ugh, put pfSense back online and made that change.  Not even pulling an address now.

                        dhcp6c[49192]: client6_init: skip opening control port
                        dhcp6c[49192]: client6_init: failed initialize control message authentication
                        dhcp6c[49192]: dhcp6_ctl_authinit: failed to open /usr/local/etc/dhcp6cctlkey: No such file or directory

                        dhcp6c[83]: client6_send: transmit failed: Can't assign requested address

                        Same behavior as another user was reporting:  http://www.broadbandreports.com/forum/r28333764-

                        –

                        I only had a short window to work with this, will try again tonight or tomorrow.

                        1 Reply Last reply Reply Quote 0
                        • R
                          razzfazz
                          last edited by

                          Works fine here:

                          
root   30031  0.0  0.1  5780  1472  ??  INs   3:12PM   0:00.01 /usr/local/sbin/dhcp6c -d -D -c /var/etc/dhcp6c_wan.conf -p /var/run/dhcp6c_re0.pid re0

                          As a side note, while preparing to make these edits, I noticed that I actually had two instances of dhcp6c running, with identical parameters and all. This is on a machine that was last rebooted earlier today, and before I had made any changes. I'm assuming that shouldn't normally happen?

                          1 Reply Last reply Reply Quote 0
                          • R
                            razzfazz
                            last edited by

                            Where does the additional logging go? /var/log/system.log?

                            1 Reply Last reply Reply Quote 0
                            • P
                              priller
                              last edited by

                              Ok, I'm up and running with the -D option now.

                              I'm also seeing two instances:

                              root  43632  0.0  0.0  5780  1448  ??  Is    7:21AM  0:00.00 /usr/local/sbin/dhcp6c -d -D -c /var/etc/dhcp6c_wan.conf -p
                              root  43762  0.0  0.0  5780  1436  ??  INs  7:21AM  0:00.00 /usr/local/sbin/dhcp6c -d -D -c /var/etc/dhcp6c_wan.conf -p

                              1 Reply Last reply Reply Quote 0
                              • P
                                priller
                                last edited by

                                It only ran for about 50 minutes and then all IPv6 address was lost and radvd silently died.  The only thing in the logs is:

                                Jun 6 08:32:16 dhcp6c[43632]: client6_timo: all information to be updated was canceled
                                Jun 6 08:31:29 dhcp6c[43632]: client6_timo: all information to be updated was canceled
                                Jun 6 08:13:00 dhcp6c[43632]: client6_timo: all information to be updated was canceled
                                Jun 6 08:11:11 dhcp6c[43632]: client6_timo: all information to be updated was canceled

                                Jun 6 07:22:03 radvd[26213]: version 1.9.1 started
                                Jun 6 07:21:56 radvd[57345]: Exiting, failed to read config file.
                                Jun 6 07:21:56 radvd[57345]: error parsing or activating the config file: /var/etc/radvd.conf
                                Jun 6 07:21:56 radvd[57345]: syntax error in /var/etc/radvd.conf, line 2:
                                Jun 6 07:21:56 radvd[57345]: version 1.9.1 started

                                1 Reply Last reply Reply Quote 0
                                • johnpozJ
                                  johnpoz LAYER 8 Global Moderator
                                  last edited by

                                  Part of the problem is that .conf is blank - i posted this before

                                  [2.1-RC0][admin@pfsense.local.lan]/root(1): cat /var/etc/radvd.conf

                                  Automatically Generated, do not edit

                                  [2.1-RC0][admin@pfsense.local.lan]/root(2):

                                  An intelligent man is sometimes forced to be drunk to spend time with his fools
                                  If you get confused: Listen to the Music Play
                                  Please don't Chat/PM me for help, unless mod related
                                  SG-4860 24.11 | Lab VMs 2.8, 24.11

                                  1 Reply Last reply Reply Quote 0
                                  • P
                                    priller
                                    last edited by

                                    @johnpoz:

                                    Part of the problem is that .conf is blank - i posted this before

                                    Sure is.

                                    I used to be able to pull IPv6 addressing and it would only go away after the lease expired after 4 days.  Something has made the problem much worse since the mid-May build I was running.

                                    I've been trying repeatedly.  At times addressing will appear for a short time then go away.  Most of the time I can't get any IPv6 addressing.
                                    radvd.conf is blank.

                                    Jun 6 13:13:47 radvd[60869]: Exiting, failed to read config file.
                                    Jun 6 13:13:47 radvd[60869]: error parsing or activating the config file: /var/etc/radvd.conf
                                    Jun 6 13:13:47 radvd[60869]: syntax error in /var/etc/radvd.conf, line 2:
                                    Jun 6 13:13:47 radvd[60869]: version 1.9.1 started

                                    I have added the -D option ( /usr/local/sbin/dhcp6c -d -D -c ) and there is no additional output that I can find.

                                    It's not a Comcast problem.  If I fire up m0n0wall or Mikrotik ROS, it works fine, all the time.

                                    2.1-RC0 (amd64)
                                    built on Thu Jun 6 09:07:25 EDT 2013
                                    FreeBSD 8.3-RELEASE-p8

                                    1 Reply Last reply Reply Quote 0
                                    • johnpozJ
                                      johnpoz LAYER 8 Global Moderator
                                      last edited by

                                      Yup same here - I fired up m0n0wall, bing bang zoom everything working for ipv6.  Now with pfsense if you do get an address its only there for a very short time.

                                      I would think this should be a high priority issue - is there just something odd with the way comcast is going it that pfsense does not like?  Or is this an issue across the board with other native ipv6 providers?

                                      But I have to say that ipv6 is currently broken in pfsense - at least with comcast as isp in chicagoland area.

                                      edit:
                                      Be more than happy to let someone in to my pfsense install to do any sort of troubleshooting they would like to do..  Just PM me and can setup access.

                                      An intelligent man is sometimes forced to be drunk to spend time with his fools
                                      If you get confused: Listen to the Music Play
                                      Please don't Chat/PM me for help, unless mod related
                                      SG-4860 24.11 | Lab VMs 2.8, 24.11

                                      1 Reply Last reply Reply Quote 0
                                      • jimpJ
                                        jimp Rebel Alliance Developer Netgate
                                        last edited by

                                        @johnpoz:

                                        Yup same here - I fired up m0n0wall, bing bang zoom everything working for ipv6.  Now with pfsense if you do get an address its only there for a very short time.

                                        I would think this should be a high priority issue - is there just something odd with the way comcast is going it that pfsense does not like?  Or is this an issue across the board with other native ipv6 providers?

                                        But I have to say that ipv6 is currently broken in pfsense.

                                        DHCPv6+PD may be broken, but that is not true of "ipv6" in general. My ALIX has a completely different issue in that it refuses to get DHCPv6+PD at bootup, but if I edit/save/apply the WAN, it comes up and stays up indefinitely. It gets DHCPv6+PD from my "main" home router, though, not an ISP.

                                        My main home router does IPv6 via HE.net tunnels and it works fine.

                                        Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

                                        Need help fast? Netgate Global Support!

                                        Do not Chat/PM for help!

                                        1 Reply Last reply Reply Quote 0
                                        • M
                                          maurer
                                          last edited by

                                          @jimp:

                                          DHCPv6+PD may be broken, but that is not true of "ipv6" in general. My ALIX has a completely different issue in that it refuses to get DHCPv6+PD at bootup, but if I edit/save/apply the WAN, it comes up and stays up indefinitely. It gets DHCPv6+PD from my "main" home router, though, not an ISP.

                                          My main home router does IPv6 via HE.net tunnels and it works fine.

                                          same here - but my ISP is RCS & RDS Romania - one of the biggest IPv6 ISP and no.1 in Ro - nationwide availability

                                          1 Reply Last reply Reply Quote 0
                                          • dotOneD
                                            dotOne
                                            last edited by

                                            Unfortunately, for me it's more or less the same.
                                            But even the first offer is not accepted.

                                            Normally the link local address is used to aquire a lease.
                                            I have a virtual IPv6 address that is used by haproxy to hide multiple servers behind a single IPv6 address.
                                            now the DHCP6 client uses this ip as the interface IP so every offer is rejected with a XID mismatch.

                                            When I remove the virtual IP the initial lease is accepted but when the lease is expired the renew is denied.

                                            /Andre

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.