Squid3 and PLEX
-
Hello.
I have been trying to set up a reverse proxy to access PLEX (a media streaming app) via HTTPS on port 443. PLEX does not support HTTPS out of the box so I have to do this to have encryption.
Essentially I want to connect to my server using https:// and have it translate to port 32400 on my local network. Here are my configs:
http://imgur.com/8ZFNw9a,kzLfOW1,kfhH7OV
(Note there are 3 images)
The server is unreachable using https://starch.hopto.org with this setup. I have verified that 443 is open for everything except pfsense and would normally be reachable if I had a NAT rule setup for it.
Does anyone have any advice for a novice?
-
Try to fill https field options.
-
Try to fill https field options.
No luck with that. Am I getting the FQDN and URI stuff correct? The actual address that I am looking to start is something like:
https://starch.hopto.org/web/
If it makes any difference that is a dynamic dns I use to keep up with my home IP as it changes often. Would there be any issue with that?
