Configuring PFsense with six distinct public C class
-
Hi all,
I've a question regarding the configuration of 6 distinct public C class on pfsense.
The class are on different segment 212.x.x.0/24 151.x.x.0/24 213.x.x.0/24 194.x.x.0/24 and so on , with relative gw on segment.
I need a centralized firewall for those class, and i want to put pfsense between the cisco router ( that manage the default GW for those class) and the local machine.
Which is the best way to configure pfsense in this scenario?
Thanks in advice.
Giovanni- -
Depends on switching, bandwidth throughput, ect…
Low bandwidth + managed switches = Assuming the networks are on separate vlans, a pair of interfaces and using vlan separation.
Low(100MB)/Medium(1GB) bandwidth + unmanaged switches = 7 interfaces one for each network + one to the Cisco.
1GB+ then a LAAG configuration or 10GB nics.Why not just use pfSense as the firewall and default gateway? ...wouldn't be the first time a 5xx/2xxx/3xxx series router was replaced by a pfSense box;)