PfSense v2.0.3 L2TP form save issue

[apmuthu]

Attempting to save the following parameters in pfSense v2.0.3 VPN -> L2TP:

Enable L2TP Server: selected
Interface: WAN
Server Address: 192.168.71.159
Remote address range (start): 192.168.71.160
Subnet Mask: 24
Number of L2TP Users: 8
..
..

Gets saved as:

Enable L2TP Server: selected
Interface: WAN
Server Address: 192.168.71.159
Remote address range (start): 192.168.71.0
Subnet Mask: 24
Number of L2TP Users: 8
..
..

But if the subnet mask is set to 29, then it saves okay.

Also if the value of the Remote IP is set in the backed up config and restored then it stays that way till the next save.

[jimp]

It's adjusting the IP to match the subnet mask you give it. That's normal.