FTP again :/
-
Try as I might, I couldn't set forwarding to FTP…
No matter if I forward the 21 port or 21 + Passive set taken from my FTP server, no matter if the helper on WAN/LAN is enabled, disabled... I looked throughout the forum... I can't make it working :(My config: WAN = adsl router in bridge mode,
PFsense LAN IP 10.0.209.1FTP server 10.0.209.10:21...
Maybe someone would be so kind and helped me step by step with that...
Sometimes I managed to get it working but only at Active... no passive :( :(Best regards,
FISHRMAN -
Any chance that you are using multiwan?
-
No I am not.
But I finally made it work :)
Didnt need to forward port 20 :P -
Yeah, just need to forward port 21.
-
do you have the procedure ?, because i tried to resolve the same problem, (from lan to wan) but when make the ls , not return any results. (i test with passive or active mode), but nothing.
-
http://wiki.pfsense.com/wikka.php?wakka=FTPTroubleShooting
-
sullrich, yeaaaa, thanks sr. just in the target *