Ahci(4) needed for TRIM

Tikimotel

Have you tried the "ahci.ko" in the "/boot/modules/" instead the "/boot/kernel/" ? To avoid it to be deleted, when update….

Awesome that did it!

AhnHEL

Fantastic tutorial!! Thanks Tikimotel and PTT ;D

Updated tutorial for the ahci_load="YES" to be edited into /boot/loader.conf.local

That way it will persist through firmware updates because the /boot/loader.conf is overwritten during updates as well.

For pfSense 2.1, Enable AHCI and TRIM for SSDs.

1\.     Download the ISO of FreeBSD 8.3 and copy the "ahci.ko" into /boot/modules/

2\.     chmod 0555 ahci.ko (r-xr-xr-x)

3\.     Check if loads in the console, "kldload ahci" & "kldstat"

4\.     Edit /boot/loader.conf.local to add ahci_load="YES"

5\.     Reboot

6\.     At the loader prompt "mountroot" type "?" for list of options.

7\.     At the loader prompt "mountroot" type "ufs:/dev/ada0s1a" (ada0;ada1;ada4 will depend on chipset used)

8\.     Once booted edit /etc/fstab and change and save the all mountpoints accordingly, including swap. (ada0;ada1;ada4 will depend on chipset used)

9\.     Reboot

pfSense will now boot like before if you have edited fstab correctly.

10\.    Perform the TRIM_set action at a shell.

						touch /root/TRIM_set; /etc/rc.reboot

						to remove

						touch /root/TRIM_unset; /etc/rc.reboot

11\.    Reboot

12\.    Check if TRIM is enabled with "tunefs -p /"

charliem

Great, worked right away! I verified the module would load, then edited /etc/fstab, changing ad4 to ada0 and rebooted. I got lucky: with my intel chipset, the SSD came up as ada0

Maybe this should be in the release notes? Or at least point to this thread in http://redmine.pfsense.org/issues/2319. No use in documenting /root/TRIM_set if more work is needed to get TRIM working.

Thanks again

ptt

You can get the needed "ko" modules from here:

FreeBSD 8.1: http://files.pfsense.org/jimp/ko-8.1/

FreeBSD 8.3: http://files.pfsense.org/jimp/ko-8.3/

Thanks goes to Jimp ;)

Also say thanks to Jimp about the " xxxx.ko on the /boot/modules/" advice ;)

http://forum.pfsense.org/index.php/topic,39595.msg205010.html#msg205010

w0w

Thanks jimp! :D

Looks like using rc.conf.local is not really needed, because during update rc.conf is edited, not deleted, so my things added into rc.conf years ago are still working. But to be safe… yes it's not bad to use rc.conf.local instead

w0w


smartctl 6.1 2013-03-16 r3800 [FreeBSD 8.3-RELEASE-p8 i386] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/: Unable to detect device type
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

I am getting this when trying to get S.M.A.R.T., after ahci enabled, any suggestions?

charliem

@w0w:

I am getting this when trying to get S.M.A.R.T., after ahci enabled, any suggestions?

The device name changed with ahci, ie from ad4 to ada0 in my case, and the extra 'a' is not being picked up by the regexp in diag_smart.php

This change to /usr/local/www/diag_smart.php will pick up the devices with the extra 'a', if it's there.


--- diag_smart.php.orig 2013-06-27 22:25:23.000000000 -0400
+++ diag_smart.php      2013-06-27 22:20:08.000000000 -0400
@@ -277,7 +277,7 @@
        default:
        {
                // Get all AD* and DA* (IDE and SCSI) devices currently installed and stores them in the $devs array
-               exec("ls /dev | grep '^[ad][da][0-9]\{1,2\}$'", $devs);
+               exec("ls /dev | grep '^[ad][da]a*[0-9]\{1,2\}$'", $devs);
                ?>

w0w

Thank you charliem!
Hmm, may be it should be submitted here - https://github.com/pfsense/pfsense/blob/master/usr/local/www/diag_smart.php ?

Or somebody can do the patch that can be applied with "Patches" package. This one posted does not look compatible.
I have patched manually but…
Patch works via "System Patches" package. Sorry ;)

Tikimotel

Use with caution!
I've cleaned up the "patch" a bit and added one extra for the dashboard widget! ;D

1st:
Description : "AHCI SMART fix"


--- diag_smart.php.orig 2013-06-27 22:25:23.000000000 -0400
+++ diag_smart.php      2013-07-16 22:20:08.000000000 -0400
@@ -280,1 +280,1 @@
-               exec("ls /dev | grep '^[ad][da][0-9]\{1,2\}$'", $devs);
+               exec("ls /dev | grep '^[ad][da]a*[0-9]\{1,2\}$'", $devs);

Base Directory: "/usr/local/www/"
(Please test first!!! Line numbers may change or the patch may not be needed in the future!!!)

2nd (for dashboard widget) ;)
Description : "ACHI dashboard fix"


--- smart_status.widget.php.orig 2013-07-16 22:25:23.000000000 -0400
+++ smart_status.widget.php      2013-07-16 22:20:08.000000000 -0400
@@ -45,1 +45,1 @@
- exec("ls /dev | grep '^[ad][da][0-9]\{1,2\}$'", $devs); ## leant from orginal SMART status screen
+ exec("ls /dev | grep '^[ad][da]a*[0-9]\{1,2\}$'", $devs); ## leant from orginal SMART status screen

Base Directory: "/usr/local/www/widgets/widgets/"
(Please test first!!! Line numbers may change or the patch may not be needed in the future!!!)

It works for me..

kejianshi

I think this is great, but TRIM on a SSD is so common like dirt by now and required, that it should either be:

1. Something that is just automagically detected and applied (like it does for any other common device)

or

2. Asked at initial install "would you like to enable TRIM on this device."

Maybe next decade.

Tikimotel

AHCI is great! for TCQ & NCQ on normal HDD's not just for TRIM on SSD's.
"ada0: Command Queueing enabled"

And for SATA 6Gbs support.
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)

jimp

The AHCI module should be included in snapshots now (I just updated a VM and checked, it's there).

Also look at /usr/local/sbin/ufslabels.sh - that would eliminate the need to make any fstab edits.

Too late for 2.1 to grow an installer option for it, but perhaps for 2.2.

AhnHEL

Thanks Jimp, just started a fresh installation on my main pf box using a new SSD and tried out the latest snap. Works perfectly.

Couldnt figure out how to run the ufslabels.sh file. Getting a permission denied at a shell, so just edited fstab the old fashioned way.

jimp

It's just missing exec bits
chmod a+x ufslabels.sh; ./ufslabels.sh

Or:
sh ufslabels.sh

I pushed a fix to correct the exec bits, it'll turn up in shapshots eventually

AhnHEL

Does that printout look normal with the unexpected operator? End result seems to be correct.


[2.1-RC0][root@pfsense@pfsenseuser.net]/root(17): chmod a+x /usr/local/sbin/ufslabels.sh ; /usr/local/sbin/ufslabels.sh
FS: / on device ada0s1a with ufsid 51f5bc9c854a3254
FS: Swap on device ada0s1b
====================
Current fstab:
# Device                Mountpoint      FStype  Options         Dump    Pass#
/dev/ada0s1a            /               ufs     rw              1       1
/dev/ada0s1b            none            swap    sw              0       0
====================
New fstab:
# Device                Mountpoint      FStype  Options         Dump    Pass#
/dev/ufsid/51f5bc9c854a3254             /               ufs     rw             11
/dev/label/swap         none            swap    sw              0       0
[: =: unexpected operator
Commit changes? (y/n):
y
Disabling swap to apply label
Applying label to swap parition
Activating new fstab
Re-enabling swap[/code]

jimp

That's not fatal (it was in code to auto-commit the changes if you passed in the right command line parameter), but it isn't relevant to using it interactively, so you can proceed from there.

w0w

Looks like SMART is also fixed
https://redmine.pfsense.org/projects/pfsense/repository/revisions/ccf479876283082b39ac9a37c1c6308f4857a6f0/diff

Thanks jimp!

Tikimotel

For completeness the smart dashboard widget needs the same fix.

w0w

@Tikimotel:

For completeness the smart dashboard widget needs the same fix.

Exactly.

jimp

I just forgot about the widget entirely in the previous commit.

Done now though:
https://github.com/pfsense/pfsense/commit/0aa297594cd1882f32d52074ba3546c4f5f97c8e