[SOLVED] VLAN - Can't access/ping hosts

[vpadro]

Hi everyone,

I'm having this issue where I cannot ping hosts or access them thru interfaces some of them are VLANs.

My setup is like this:

DSL Modem –--> PfSense Box ----> HP ProCurve 1810-24G v2

3 NICs on the PfSense Box, 1 dedicated to WAN, 1 dedicated to LAN (Switch Port 1, excluded from VLANs) and the last one is
Tagged on Port 2 on the ProCurve for VLANs only.

HP Switch setup
Ports 14, 16, 18, 20, 22, 24 Untagged for VLAN100
Port 3 Untagged for cascading Dell Switch for VLAN150
Ports 15, 17, 19, 21 Untagged for VLAN200
Rest of ports are excluded for Tagging/Untagging (LAN)

em0 - WAN
em1 - LAN
em2 - VLANs:

VLAN100 - SERVER
VLAN150 - LAB
VLAN200 - ISCSI

What I can do:

DHCP on every VLAN (ISCSI, LAB, SERVER) interface
Ping each VLAN Gateway (no matter which interface [192.168.50.1, 192.168.100.1, 192.168.150.1, 192.168.200.1])
Ping LAN's devices/hosts
Manage VMs on the Management interface (LAN)
Get to the outside world from any interface.

What I can't do:

Ping SERVER interface's hosts from LAN, LAB or ISCSI interfaces
Access VMs on the SERVER interface from LAN, LAB or ISCSI interfaces
Ping LAB interface's devices/PCs from LAN, SERVER or ISCSI interface
Access PCs/WiFi Printer on the LAB interface from LAN, SERVER or ISCSI interfaces

I have created rules for every single interface to allow everything, I checked if NAT was doing something weird but everything seems ok (I'm attaching some screen captures), I have re-checked every basic/advanced setting on the PfSense box and the ProCurve Switch and they're supposed to be working as planned, but I simply can't ping thru interfaces.

I had something like this maybe 3 years ago but can't find my notes on that, maybe it's so easy that I'm overseeing it.

Any hint or help will be much more appreciated.

TIA.

[vpadro]

Screen captures.

[shon]

Is everyone using the same gateway?

e.g. are all your servers, workstations, default gateway the HP procurve switch?

[vpadro]

Thank you, you reminded me to check my server's network config and there was a typo on it.

Everything is working as supposed to.  ;)

[pookguy88]

I have this exact same problem… can you guys give more detail on what you did?

aren't the gateways on each host supposed to be set to the VLAN gateway?