Traffic Shaping per IP
-
hi all:
i am trouble with limiting ip address to a certain bandwidth, went through nearly all the posts but still no luck.
i need to limit a single ip address (Lan) "10.0.0.40" to 256Kbit/s Upload and Download.
i did the following: (taken from another post) but still the download hits 2Mbits/s
Create 4 Limiters per client:
IncomingWan –->> Download (Select Mask "Destination addresses" when creating the limiter , select also desire bandwidth here)
OutgoingLan --- >> Download (Select Mask "Source addresses" when creating the limiter , select also desire bandwidth here)
IncomingLan ---->> Upload (Select Mask "Source addresses" when creating the limiter , select also desire bandwidth here)
OutgoingWan ---->>Upload ( (Select Mask "Destination addresses" when creating the limiter , select also desire bandwidth here)After creating the limiters you need to apply them on Firewall>>Rules ( I did it over my LAN Interface)
Create 2 rules by IP
You need to specify the IP or IP group as source in one rule and the other as destination.
On each rule , go to advanced and select IN/OUT limiters .
Example : IncomingWan --- OutgoingLAN ( when the IP is the destination) download
IncomingLAN --- OutgoingWAN ( when the IP is the source) uploadany help would be appreciated
thanks in advance.... -
you only need two limiters for that scenario
ex.
upload - 40 kbps - mask: destination
download - 200 kbps - mask: sourceon lan rule
proto: any
source: 10.0.0.40 (select single host or alias)
destination: any
destination por: anyadvance
in/out: upload (40)/ download (200)then save
-
you only need two limiters for that scenario
ex.
upload - 40 kbps - mask: destination
download - 200 kbps - mask: sourceon lan rule
proto: any
source: 10.0.0.40 (select single host or alias)
destination: any
destination por: anyadvance
in/out: upload (40)/ download (200)then save
i did the following but the limiter is still not getting applied
link to the screen shots
http://postimg.org/gallery/94rnd790/thanks
-
Firewall rules are evaluated from top to bottom & "First match" win….
So, to get your rule with the limiter working, you should move it above the "Default allow LAN to ANY " rule
-
@ptt:
Firewall rules are evaluated from top to bottom & "First match" win….
So, to get your rule with the limiter working, you should move it above the "Default allow LAN to ANY " rule
thanks it worked :)
-
FYI- the masking is incorrect on the example given by cheonne earlier in this thread.
For the upload limiter, you want a source mask
For the download limiter, you want a destination maskThe same pair of limiters would be used for both LAN and WAN rules (LAN - In=Upload, Out=Download, WAN - In=Download, Out=Upload)
-
FYI- the masking is incorrect on the example given by cheonne earlier in this thread.
For the upload limiter, you want a source mask
For the download limiter, you want a destination maskThe same pair of limiters would be used for both LAN and WAN rules (LAN - In=Upload, Out=Download, WAN - In=Download, Out=Upload)
thanks for the correction.. ;)
i mislook his thread ttle "…per ip"