5 WANS to a single Lan with some http/https servers on

[kejianshi]

OK - Now, I need to know.  What is your gateway address/IP?

[kejianshi]

OK - I'm not sure how you have been trying to route everything here, but I'm pretty sure you want to use Virtual IPs and 1:1 NAT to get your public IPs to each server.  To be clear, are the servers all virtual or will some be physical?

[monster400]

all servers are vms amt 
System: Static Routes
empty

[kejianshi]

I want you to take a quick look at this.
Now, the first part of this video deals with bridging and static Public IP assignments.
You may have to do something like that but I don't think so.  Yours are DHCP assigned.

So, you probably want to go straight to about 2:50 to the part where Virtual IPs are being assigned.

http://www.youtube.com/watch?v=zrBr0N0WrTY

(Sorry - I'm doing about 5 things at once, so earlier I referenced VLAN when I meant VIP.)

[monster400]

have seen it before and tryed it

[kejianshi]

OK - Could you post screenshots of your WAN interface assignment, and VIPs you have set up, firewall rules etc?

The way this should work is your PFsense will get one of your IPs.

The rest of your IPs should be assignable to VIP.

Also want to see that each of the clients to pfsense gets an IP to map public IP to.

[monster400]

damm they are too large to upload here do you have a email?

[kejianshi]

Nope - I'd reduce their size and save as jpg

[monster400]

have to do one and one


[monster400]

lan


[monster400]

wan


[monster400]

wan2


[monster400]

wan3


[monster400]

wan4


[monster400]

wan5


[monster400]

firewall vip


[monster400]

gateways

[monster400]

Interfaces assign network ports


[monster400]

nat 1:1


[monster400]

static routes