[SOLVED] pfSense and X500 - wont boot
-
1 pfSense
2 pfSenseF6 PXE
Boot: 1
/boot.config: -hFreeBSD/i386 boot
Default: 0:ad(0,a)/boot/loader
boot:
\It gets stuck here….
-
That is the point at which the output switches to the serial console. It's probably booting fine.
Are you booting from a NanoBSD image on CF card? Do you have a PCI graphics card in there to see the bootloader output?Steve
Edit: What I wrote above is wrong!
That's in fact the first thing you expect to see on the serial console after the bios has run. -
I re-loaded the 2gb image after successfully loading and booting from the 512mb image.
A bad image load at first. All is working now, thanks!