New firewall, what do you think?

stephenw10

There are plenty of example Sandy Bridge builds which don't have to cost that much. For example ~$300: http://forum.pfsense.org/index.php/topic,44269.0.html

Steve

kejianshi

I also have no idea where this will be. On a rack or on a shelf. Sitting on a table or floor?

If it doesn't need to fit in a 1U rack, I might even consider taking a obsolete quad-core desktop with 4+ GB of RAM and a couple of dirt cheap PCIe gigabit intel NIC card and building it that way. Repurposed old hardware like that costs almost nothing and is very fast for your purposes and reliable.

xarlygt

Thanks for your replies, it will be inside a rack but not necessarily in rack chassis, I prefer a small box for this

So, after some serching, what about this?

ASUS P8H61-I
Celeron G1610
4GB RAM ddr3
M350 case
ssd 16gb or other
intel dual nic

This is more or less 280€ +- $370, almost the same than my first approach lol

Thank you very much

kejianshi

I'd get a core i5…

For heavy VPN use and a little future proofing, I like the idea of having the AES routines on chip and the extra threads available at about the same power requirement. Since you are beefing up on your original spec, may as well do it up well.

stephenw10

Having an AES-NI capable CPU is nice and would be great for high bandwidth VPN but it's overkill here. The great thing about boards like that is the range of CPUs they support. The Celeron is just about the lowest performing processor that fits, if at some later date you have a wide range of upgrade options which will probably all be cheaper by then. :)

That said I notice the support page for that particular board only lists Sandy Bridge CPUs, not the G1610: http://www.asus.com/Motherboards/P8H61I/#support_CPU

Steve

tirsojrp

@xarlygt:

Thanks for your replies, it will be inside a rack but not necessarily in rack chassis, I prefer a small box for this

So, after some serching, what about this?

ASUS P8H61-I
Celeron G1610
4GB RAM ddr3
M350 case
ssd 16gb or other
intel dual nic

How are you planning to fit a dual nic in that case+mobo combination?

This is more or less 280€ +- $370, almost the same than my first approach lol

Thank you very much

kejianshi

Not to worry… That CPU will make a great E-Bay item. haha

Then an i5 that fits the socket....

kejianshi

http://support.asus.com/cpusupport/detail.aspx?SLanguage=en&p=1&m=P8H61-I%20R2.0&cpu=Intel%20Celeron%20G1610%20%282.6GHz,55W,L3:2MB,2C,rev.P0%29&pcb=ALL&sincebios=0804&memo=

Maybe just a bios update if mobo revision is correct.

xarlygt

I choosed it because I found mobo + cpu + ram in ebay as bundle pack xd
http://www.ebay.de/itm/ASUS-P8H61-I-mini-ITX-Intel-Celeron-G1610-2x-2-6GHz-4GB-RAM-DDR3-/310674841980?pt=Komponentenbundles&hash=item4855a9e17c

Yes the motherboard is version 2.0

i5 would be great as well as xeon e5, but the thing here is do more (or the same) for less money so those cpu are not an option. Thanks for suggestion

Then do you think this build would handle the load well (50 users, Firewall, Internet gateway, vpn roadwarriors, vpn to remote offices, high troughput, no snort)

Thank you very much

stephenw10

Without Snort or Squid that board/CPU will handle >1Gbps so, yes, I'd say it will be fine.

Steve