DNS Forwarder in the last snapshots
-
Seeing the same thing over here, for me it was 8/15 and 8/16 Snapshot.
I have not checked snapshot after 16th cus I put in DNS server manually and that fixed it. -
@val:
Seeing the same thing over here, for me it was 8/15 and 8/16 Snapshot.
I have not checked snapshot after 16th as put in DNS server manually.So 8/15 was OK and 8/16 broke it? Or did 8/15 break it (and if so, what snap were you on before 8/15?)
-
Hello,
unfortunately I can't help on this because I was in vacation for a week, then when I updated I found out this problemā¦ :SMichele
-
15th snapshot starts to break it, before that I was on 14th snapshots.
my connection is using pppoe a vdsl2
for me DNS starts to break on this snapshot
pfSense-2.1-RC1-amd64-20130815-0311 -
If you look in /var/etc/ - do you have any "nameserver_*" files there? (Where * = your interface name)
-
This may have been caused by https://github.com/pfsense/pfsense/commit/1702a838194d2f4ffaa99359f888a42b0832472a which was accidentally put on 2.1 when it was meant for master (2.2) only, it will be gone from the next snapshot so try it again once that shows up later tonight.
-
If you look in /var/etc/ - do you have any "nameserver_*" files there? (Where * = your interface name)
there is, anything else you need?
-
This may have been caused by https://github.com/pfsense/pfsense/commit/1702a838194d2f4ffaa99359f888a42b0832472a which was accidentally put on 2.1 when it was meant for master (2.2) only, it will be gone from the next snapshot so try it again once that shows up later tonight.
Righto, thank you jimp
Val
-
This may have been caused by https://github.com/pfsense/pfsense/commit/1702a838194d2f4ffaa99359f888a42b0832472a which was accidentally put on 2.1 when it was meant for master (2.2) only, it will be gone from the next snapshot so try it again once that shows up later tonight.
Jim,
I think you were right, just updated to 2.1-RC1 (amd64)Ā built on Mon Aug 19 16:16:39 EDT 2013 and it seems to be fixed.Ā My nameserver_pppoe0 was empty before the update and now contains the DNS servers.Ā I removed them from the System: General Setup screen and it's working again.
thanks,
Bill -
This may have been caused by https://github.com/pfsense/pfsense/commit/1702a838194d2f4ffaa99359f888a42b0832472a which was accidentally put on 2.1 when it was meant for master (2.2) only, it will be gone from the next snapshot so try it again once that shows up later tonight.
Jim,
I think you were right, just updated to 2.1-RC1 (amd64)Ā built on Mon Aug 19 16:16:39 EDT 2013 and it seems to be fixed.Ā My nameserver_pppoe0 was empty before the update and now contains the DNS servers.Ā I removed them from the System: General Setup screen and it's working again.
thanks,
BillThx for the heads up, I am just doing the update now.
-
Hello,
I confirm, on the very last snapshot (built on Mon Aug 19 16:16:08 EDT 2013) the DNSes got from the PPP connection are successfully used, the file /var/etc/nameserver_pppoe0 contains the DNS, and everything works great againā¦Thanks a lot Jim!!
Michele
