Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Snort 2.9.4.6 Pkg v 2.5.9

    Scheduled Pinned Locked Moved
    pfSense Packages
    28
    203
    100.8k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • P
      pfSenseRocks
      last edited by

      I have IPS Policy ( i.e. Snort GPLv2 Community Rules + Emerging Threats rule set) enabled on the WAN. And, all rule set minus the Snort GPLv2 Community Rules + Emerging Threats rule set enabled on the LAN interface.

      Should I see 2 snort processes in this configuration, i.e. one snort process per interface? If I have IPv4 and IPv6 enabled on both the interface should I expect to see 4 processes?
      Thanks!

      1 Reply Last reply Reply Quote 0
      • bmeeksB
        bmeeks
        last edited by

        @pfSenseRocks:

        I have IPS Policy ( i.e. Snort GPLv2 Community Rules + Emerging Threats rule set) enabled on the WAN. And, all rule set minus the Snort GPLv2 Community Rules + Emerging Threats rule set enabled on the LAN interface.

        Should I see 2 snort processes in this configuration, i.e. one snort process per interface? If I have IPv4 and IPv6 enabled on both the interface should I expect to see 4 processes?
        Thanks!

        One Snort process per interface.  So in your case you should see two Snort processes.  There was an issue with the later 2.1 Snapshots where multiple Snort processes per interface were getting kicked off on reboots.  That was the result of some changes going on with the pfSense Snapshot code, though.  Nothing has changed in the Snort package for a while.

        Bill

        1 Reply Last reply Reply Quote 0
        • P
          pfSenseRocks
          last edited by

          Thanks Bill. There is certainly something wonky going on, on the latest 2.1 snapshots. I have reconfigured snort for just the WAN interface IPv4 (no IPv6). Further, I only have IPS Policy ( i.e. Snort GPLv2 Community Rules + Emerging Threats rule set) enabled on the WAN. I see four (4) snort processes consuming up to 90% of the 6GB RAM and over 60% of the 16GB swap space.

          Anything I can do (provide logs, traces, additional information) to debug and resolve this issue?

          1 Reply Last reply Reply Quote 0
          • G
            gogol
            last edited by

            @pfSenseRocks:

            Anything I can do (provide logs, traces, additional information) to debug and resolve this issue?

            You could read through this thread. I already made a note about this a few pages back  ;)

            1 Reply Last reply Reply Quote 0
            • P
              pfSenseRocks
              last edited by

              Thank you for the workaround. I was offering up any help I can provide (since I have a 100% & consistent repro) to debug this issue and solve it rather than just working around it.

              1 Reply Last reply Reply Quote 0
              • bmeeksB
                bmeeks
                last edited by

                @pfSenseRocks:

                Thank you for the workaround. I was offering up any help I can provide (since I have a 100% & consistent repro) to debug this issue and solve it rather than just working around it.

                I have some VMs I can test in. I have a July 4th 2.1 Snapshot that does not exhibit this behavior.  I will "snapshot" that VM and then let it upgrade to the latest 2.1 RC snapshot and see what I can determine about the multiple Snort process starts.

                I've been letting Snort cook for a while with no package updates for two reasons.  First to see how things were performing for users, and to see if the FreeBSD port got updated to the 2.5.x Snort binary.  I have a new version of the Snort package ready that implements multiple engine/server configurations for the FRAG3, STREAM5 and HTTP_INSPECT preprocessors.

                Bill

                1 Reply Last reply Reply Quote 0
                • bmeeksB
                  bmeeks
                  last edited by

                  @pfSenseRocks:

                  Thank you for the workaround. I was offering up any help I can provide (since I have a 100% & consistent repro) to debug this issue and solve it rather than just working around it.

                  pfSenseRocks:

                  I upgraded a test VM to the latest 2.1RC snapshot.  I could not reproduce the multiple processes problem.  I have Snort configured on two interfaces for the VM, and I only get two Snort processes.  Now I am using my new 2.6.0 package code in the VM.  I can try reverting a VM back to the current 2.5.9 package and try again.

                  Bill

                  1 Reply Last reply Reply Quote 0
                  • P
                    pfSenseRocks
                    last edited by

                    That is great news, Bill. Thanks for the update. Let me update to the latest snapshot as well and see if I can reproduce your success.

                    1 Reply Last reply Reply Quote 0
                    • P
                      pfSenseRocks
                      last edited by

                      Unfortunately, I still reproduce the problem. Usually occurs after snort restarts after downloading new rules.

                      [2.1-RC1][admin@sense.home]/root(1): ps -ax | grep snort
                      23405  ??  Ss    8:25.86 /usr/pbi/snort-amd64/bin/snort -R 56048 -E -q -l /var/log/snort/snort_em0_vlan1056048 –pid-path /var/run
                      24490  ??  SNLs  0:28.51 /usr/pbi/snort-amd64/bin/snort -R 56048 -D -q -l /var/log/snort/snort_em0_vlan1056048 --pid-path /var/run
                      45765  ??  SNs    0:29.51 /usr/pbi/snort-amd64/bin/snort -R 56048 -D -q -l /var/log/snort/snort_em0_vlan1056048 --pid-path /var/run
                      46524  ??  Ss    0:03.79 /usr/pbi/snort-amd64/bin/snort -R 40477 -D -q -l /var/log/snort/snort_em0_vlan1140477 --pid-path /var/run
                      47171  ??  SNs    0:03.70 /usr/pbi/snort-amd64/bin/snort -R 40477 -D -q -l /var/log/snort/snort_em0_vlan1140477 --pid-path /var/run
                      47645  ??  SNs    0:03.76 /usr/pbi/snort-amd64/bin/snort -R 40477 -D -q -l /var/log/snort/snort_em0_vlan1140477 --pid-path /var/run
                      52671  0  S+    0:00.00 grep snort

                      Version 2.1-RC1  (amd64)
                      built on Mon Aug 19 16:16:39 EDT 2013
                      FreeBSD 8.3-RELEASE-p9

                      1 Reply Last reply Reply Quote 0
                      • bmeeksB
                        bmeeks
                        last edited by

                        @pfSenseRocks:

                        Unfortunately, I still reproduce the problem. Usually occurs after snort restarts after downloading new rules.

                        [2.1-RC1][admin@sense.home]/root(1): ps -ax | grep snort
                        23405  ??  Ss    8:25.86 /usr/pbi/snort-amd64/bin/snort -R 56048 -E -q -l /var/log/snort/snort_em0_vlan1056048 –pid-path /var/run
                        24490  ??  SNLs  0:28.51 /usr/pbi/snort-amd64/bin/snort -R 56048 -D -q -l /var/log/snort/snort_em0_vlan1056048 --pid-path /var/run
                        45765  ??  SNs    0:29.51 /usr/pbi/snort-amd64/bin/snort -R 56048 -D -q -l /var/log/snort/snort_em0_vlan1056048 --pid-path /var/run
                        46524  ??  Ss    0:03.79 /usr/pbi/snort-amd64/bin/snort -R 40477 -D -q -l /var/log/snort/snort_em0_vlan1140477 --pid-path /var/run
                        47171  ??  SNs    0:03.70 /usr/pbi/snort-amd64/bin/snort -R 40477 -D -q -l /var/log/snort/snort_em0_vlan1140477 --pid-path /var/run
                        47645  ??  SNs    0:03.76 /usr/pbi/snort-amd64/bin/snort -R 40477 -D -q -l /var/log/snort/snort_em0_vlan1140477 --pid-path /var/run
                        52671  0  S+    0:00.00 grep snort

                        Version 2.1-RC1  (amd64)
                        built on Mon Aug 19 16:16:39 EDT 2013
                        FreeBSD 8.3-RELEASE-p9

                        Looks like you have multiple VLANs on a single interface.  I did not test that way.  I have just single IP blocks on each of my three interfaces, and I get only single instances of Snort per interface.

                        I have a theory about what could be happening.  Unfortunately, if my theory is correct, this may be a hard bug to quash.  Let me ponder on it and maybe also set up a VLAN configuration similar to yours.  Without giving away too much private information, can you post a high-level description of how your Snort interfaces are configured in terms of VLANs (number per interface, etc.)?

                        Bill

                        1 Reply Last reply Reply Quote 0
                        • ?
                          A Former User
                          last edited by

                          Hello,
                          I have a small feature request. Would it be possible for the alerts tab to have a DNS lookup button under IPs shown (both source and destination) that opens a new tab and performs the same function as looking up an IP in Diagnostics>DNS lookup and displaying the results? Performing DNS lookups for all IPs showing up on alerts is not wanted or encouraged, just specific IPs. Saves me having to manually copy+paste the IP in DNS lookup.

                          Thank you.

                          1 Reply Last reply Reply Quote 0
                          • S
                            Supermule Banned
                            last edited by

                            If I may add a feature for DNS lookup. A country flag next to the IP in the alerts and blocked tab…

                            Making it real easy to see where its coming from?

                            @jflsakfja:

                            Hello,
                            I have a small feature request. Would it be possible for the alerts tab to have a DNS lookup button under IPs shown (both source and destination) that opens a new tab and performs the same function as looking up an IP in Diagnostics>DNS lookup and displaying the results? Performing DNS lookups for all IPs showing up on alerts is not wanted or encouraged, just specific IPs. Saves me having to manually copy+paste the IP in DNS lookup.

                            Thank you.

                            1 Reply Last reply Reply Quote 0
                            • ?
                              A Former User
                              last edited by

                              @Supermule:

                              If I may add a feature for DNS lookup. A country flag next to the IP in the alerts and blocked tab…

                              Making it real easy to see where its coming from?

                              I believe that would require to perform the lookups in advance for all IPs, which could overload some low bandwidth connections. I'm getting hundreds of alerts per hour for example. Personally I don't think that is a good idea. If there is a way to store the country IPs in RAM and perform the country lookup there, I'd be fine with that.

                              Edit: completely missed my mind: The functionality wanted is the exact same functionality offered by the "blue i" button next to IPs in the firewall logs

                              1 Reply Last reply Reply Quote 0
                              • K
                                kilthro
                                last edited by

                                @Supermule:

                                If I may add a feature for DNS lookup. A country flag next to the IP in the alerts and blocked tab…

                                Making it real easy to see where its coming from?

                                @jflsakfja:

                                Hello,
                                I have a small feature request. Would it be possible for the alerts tab to have a DNS lookup button under IPs shown (both source and destination) that opens a new tab and performs the same function as looking up an IP in Diagnostics>DNS lookup and displaying the results? Performing DNS lookups for all IPs showing up on alerts is not wanted or encouraged, just specific IPs. Saves me having to manually copy+paste the IP in DNS lookup.

                                Thank you.

                                While i understand on a high traffic network with alot of alerts this may not be wanted but to have the option would be fantastic. Maybe something that is enabled or disabled.. Good idea anyways. :-D

                                1 Reply Last reply Reply Quote 0
                                • ?
                                  A Former User
                                  last edited by

                                  An option to display all IP's country that can be enabled and the "blue i" button next to the IP in the alerts/blocked tabs disappears when the option is enabled, when it is disabled, the "blue i" button is shown next to IPs (to prevent flooding the network with lookups)? Everybody is happy then  ;D

                                  1 Reply Last reply Reply Quote 0
                                  • bmeeksB
                                    bmeeks
                                    last edited by

                                    I will take a look and see what's possible with regards to the DNS lookups on the Alerts and Blocked tabs.  I like the idea of the blue icon and then a pop-up window containing the lookup results when clicked.  That is the least I/O intensive procedure.

                                    Bill

                                    1 Reply Last reply Reply Quote 0
                                    • C
                                      Cino
                                      last edited by

                                      @bmeeks:

                                      @pfSenseRocks:

                                      Unfortunately, I still reproduce the problem. Usually occurs after snort restarts after downloading new rules.

                                      [2.1-RC1][admin@sense.home]/root(1): ps -ax | grep snort
                                      23405  ??  Ss    8:25.86 /usr/pbi/snort-amd64/bin/snort -R 56048 -E -q -l /var/log/snort/snort_em0_vlan1056048 –pid-path /var/run
                                      24490  ??  SNLs  0:28.51 /usr/pbi/snort-amd64/bin/snort -R 56048 -D -q -l /var/log/snort/snort_em0_vlan1056048 --pid-path /var/run
                                      45765  ??  SNs    0:29.51 /usr/pbi/snort-amd64/bin/snort -R 56048 -D -q -l /var/log/snort/snort_em0_vlan1056048 --pid-path /var/run
                                      46524  ??  Ss    0:03.79 /usr/pbi/snort-amd64/bin/snort -R 40477 -D -q -l /var/log/snort/snort_em0_vlan1140477 --pid-path /var/run
                                      47171  ??  SNs    0:03.70 /usr/pbi/snort-amd64/bin/snort -R 40477 -D -q -l /var/log/snort/snort_em0_vlan1140477 --pid-path /var/run
                                      47645  ??  SNs    0:03.76 /usr/pbi/snort-amd64/bin/snort -R 40477 -D -q -l /var/log/snort/snort_em0_vlan1140477 --pid-path /var/run
                                      52671  0  S+    0:00.00 grep snort

                                      Version 2.1-RC1  (amd64)
                                      built on Mon Aug 19 16:16:39 EDT 2013
                                      FreeBSD 8.3-RELEASE-p9

                                      Looks like you have multiple VLANs on a single interface.  I did not test that way.  I have just single IP blocks on each of my three interfaces, and I get only single instances of Snort per interface.

                                      I have a theory about what could be happening.  Unfortunately, if my theory is correct, this may be a hard bug to quash.  Let me ponder on it and maybe also set up a VLAN configuration similar to yours.  Without giving away too much private information, can you post a high-level description of how your Snort interfaces are configured in terms of VLANs (number per interface, etc.)?

                                      Bill

                                      I have a similar issue. If there rc.start_packages is called, snort doesn't restart correctly. It will create new instances of snort… I've maxed out of resources on my box because of this..

                                      
[2.1-RC1][/root(1): ps -ax | grep snort
11617  ??  SNs    0:19.21 /usr/pbi/snort-i386/bin/snort -R 63656 -D -q -l /var/log/snort/snort_em0_vlan563656 --pid-path /var/run --nolock-pidfile -G 63656 -c /usr/pbi/snort-i386/etc
12256  ??  SNs    9:30.06 /usr/pbi/snort-i386/bin/snort -R 60770 -D -q -l /var/log/snort/snort_em360770 --pid-path /var/run --nolock-pidfile -G 60770 -c /usr/pbi/snort-i386/etc/snort
18390  ??  SNs    7:23.96 /usr/pbi/snort-i386/bin/snort -R 5622 -D -q -l /var/log/snort/snort_em25622 --pid-path /var/run --nolock-pidfile -G 5622 -c /usr/pbi/snort-i386/etc/snort/sn
42825  ??  SNs    4:17.50 /usr/pbi/snort-i386/bin/snort -R 60770 -D -q -l /var/log/snort/snort_em360770 --pid-path /var/run --nolock-pidfile -G 60770 -c /usr/pbi/snort-i386/etc/snort
56893  ??  SNs    1:41.06 /usr/pbi/snort-i386/bin/snort -R 60770 -D -q -l /var/log/snort/snort_em360770 --pid-path /var/run --nolock-pidfile -G 60770 -c /usr/pbi/snort-i386/etc/snort
67712  ??  SNs    1:26.93 /usr/pbi/snort-i386/bin/snort -R 63656 -D -q -l /var/log/snort/snort_em0_vlan563656 --pid-path /var/run --nolock-pidfile -G 63656 -c /usr/pbi/snort-i386/etc
74458  ??  SNs    0:17.27 /usr/pbi/snort-i386/bin/snort -R 59292 -D -q -l /var/log/snort/snort_em359292 --pid-path /var/run --nolock-pidfile -G 59292 -c /usr/pbi/snort-i386/etc/snort
76099  ??  SNs    3:40.18 /usr/pbi/snort-i386/bin/snort -R 5622 -D -q -l /var/log/snort/snort_em25622 --pid-path /var/run --nolock-pidfile -G 5622 -c /usr/pbi/snort-i386/etc/snort/sn
90876  ??  SNs    1:26.13 /usr/pbi/snort-i386/bin/snort -R 5622 -D -q -l /var/log/snort/snort_em25622 --pid-path /var/run --nolock-pidfile -G 5622 -c /usr/pbi/snort-i386/etc/snort/sn
93617  ??  SNs    0:05.95 /usr/pbi/snort-i386/bin/snort -R 63656 -D -q -l /var/log/snort/snort_em0_vlan563656 --pid-path /var/run --nolock-pidfile -G 63656 -c /usr/pbi/snort-i386/etc
63880   0  S+     0:00.02 grep snort
[2.1-RC1][root@pfsense.cino.homeip.net]/root(2):
                                      1 Reply Last reply Reply Quote 0
                                      • P
                                        pfSenseRocks
                                        last edited by

                                        can you post a high-level description of how your Snort interfaces are configured in terms of VLANs (number per interface, etc.)?

                                        Sorry about the tardy response, Bill. I have been traveling with intermittent to no internet connectivity.

                                        Here's my config on pfSense:

                                        VLAN10  WAN
                                        VLAN11  LAN
                                        VLAN12  GAN  // Guest LAN

                                        snort:
                                        WAN IPS security profile
                                        LAN  All other categories that aren't included in security profile

                                        Both interfaces are configured for AC.

                                        Sorry about the incomplete info. I am reciting from memory.

                                        1 Reply Last reply Reply Quote 0
                                        • bmeeksB
                                          bmeeks
                                          last edited by

                                          Cino and pfSenseRocks:

                                          Thank you for the feedback on the multiple instances problem.  I will be tied up the next few days on some business and then personal stuff, so it will be after the U.S. Labor Day Holiday (September 2nd) before I can devote a lot of time to researching this issue.  The hint about rc.start_packages is helpful.  I will see if I can get to the bottom of the problem, though.  Different manifestations of what are probably the same underlying bug have shown up over the last year with Snort and restarts.  Sometimes it seems to be fixed, and then it pops up again.  Obviously we have not yet found the true root cause.

                                          Bill

                                          1 Reply Last reply Reply Quote 0
                                          • C
                                            Cino
                                            last edited by

                                            Bill,

                                            For a test to grab clean logs of the issue, I bounced my cable modem.. Hope this helps and enjoying labor day… I know I will be

                                            GW Log

                                            
Aug 28 10:41:13 	apinger: SIGHUP received, reloading configuration.
Aug 28 10:41:13 	apinger: SIGHUP received, reloading configuration.
Aug 28 10:40:58 	apinger: SIGHUP received, reloading configuration.
Aug 28 10:40:09 	apinger: alarm canceled (config reload): WAN_DHCP(X.X.208.1) *** WAN_DHCPdown ***
Aug 28 10:40:09 	apinger: SIGHUP received, reloading configuration.
Aug 28 10:39:53 	apinger: ALARM: WAN_DHCP(X.X.208.1) *** WAN_DHCPdown ***

                                            System Log

                                            
Aug 28 10:47:25 	sshd[6872]: Accepted keyboard-interactive/pam for root from 192.168.200.6 port 28523 ssh2
Aug 28 10:43:28 	SnortStartup[11968]: Snort SOFT RESTART for WLAN Guest Alerting(63656_em0_vlan5)...
Aug 28 10:43:22 	SnortStartup[10757]: Snort SOFT RESTART for WLAN Guest Alerting(63656_em0_vlan5)...
Aug 28 10:43:19 	kernel: em2: promiscuous mode enabled
Aug 28 10:43:11 	SnortStartup[9674]: Snort START for LAN Alerting(5622_em2)...
Aug 28 10:43:09 	SnortStartup[8925]: Snort SOFT RESTART for WAN Alerting(59292_em3)...
Aug 28 10:43:02 	SnortStartup[7961]: Snort START for LAN Alerting(5622_em2)...
Aug 28 10:42:58 	SnortStartup[6717]: Snort START for WAN Alerting(59292_em3)...
Aug 28 10:42:57 	kernel: em3: promiscuous mode enabled
Aug 28 10:42:45 	SnortStartup[67423]: Snort START for WAN Blocking(60770_em3)...
Aug 28 10:42:38 	kernel: em2: promiscuous mode disabled
Aug 28 10:42:37 	snort[9920]: *** Caught Term-Signal
Aug 28 10:42:36 	SnortStartup[64481]: Snort STOP for LAN Alerting(5622_em2)...
Aug 28 10:42:33 	SnortStartup[60383]: Snort START for WAN Blocking(60770_em3)...
Aug 28 10:42:31 	SnortStartup[57262]: Snort START for WLAN Guest Alerting(63656_em0_vlan5)...
Aug 28 10:42:28 	kernel: em2: promiscuous mode enabled
Aug 28 10:42:24 	kernel: em3: promiscuous mode disabled
Aug 28 10:42:24 	snort[73635]: *** Caught Term-Signal
Aug 28 10:42:23 	SnortStartup[5755]: Snort STOP for WAN Alerting(59292_em3)...
Aug 28 10:42:20 	bandwidthd: Drawing initial graphs
Aug 28 10:42:20 	bandwidthd: Packet Encoding: Ethernet
Aug 28 10:42:20 	bandwidthd: Drawing initial graphs
Aug 28 10:42:20 	bandwidthd: Opening em2
Aug 28 10:42:20 	bandwidthd: Finished recovering 8648 records
Aug 28 10:42:20 	bandwidthd: Packet Encoding: Ethernet
Aug 28 10:42:20 	bandwidthd: Opening em2
Aug 28 10:42:20 	bandwidthd: Finished recovering 1761 records
Aug 28 10:42:20 	bandwidthd: Recovering from log.1.0.cdf
Aug 28 10:42:20 	bandwidthd: Finished recovering 4016 records
Aug 28 10:42:20 	bandwidthd: Recovering from log.1.1.cdf
Aug 28 10:42:20 	bandwidthd: Finished recovering 4015 records
Aug 28 10:42:20 	bandwidthd: Recovering from log.2.0.cdf
Aug 28 10:42:20 	bandwidthd: Finished recovering 1131 records
Aug 28 10:42:20 	bandwidthd: Drawing initial graphs
Aug 28 10:42:20 	bandwidthd: Packet Encoding: Ethernet
Aug 28 10:42:20 	bandwidthd: Opening em2
Aug 28 10:42:20 	bandwidthd: Drawing initial graphs
Aug 28 10:42:20 	bandwidthd: Packet Encoding: Ethernet
Aug 28 10:42:20 	bandwidthd: Finished recovering 123 records
Aug 28 10:42:20 	bandwidthd: Opening em2
Aug 28 10:42:20 	bandwidthd: Recovering from log.4.0.cdf
Aug 28 10:42:20 	bandwidthd: Finished recovering 2696 records
Aug 28 10:42:20 	bandwidthd: Recovering from log.2.1.cdf
Aug 28 10:42:20 	bandwidthd: Finished recovering 1208 records
Aug 28 10:42:20 	bandwidthd: Recovering from log.1.2.cdf
Aug 28 10:42:20 	bandwidthd: Recovering from log.3.0.cdf
Aug 28 10:42:20 	bandwidthd: Recovering from log.2.2.cdf
Aug 28 10:42:20 	bandwidthd: Monitoring subnet 192.168.5.0 with netmask 192.168.5.0
Aug 28 10:42:20 	bandwidthd: Monitoring subnet 192.168.0.0 with netmask 192.168.0.0
Aug 28 10:42:19 	snort[63368]: *** Caught Term-Signal
Aug 28 10:42:18 	SnortStartup[1275]: Snort STOP for WAN Blocking(60770_em3)...
Aug 28 10:42:18 	bandwidthd: Finished recovering 2696 records
Aug 28 10:42:18 	bandwidthd: Recovering from log.2.1.cdf
Aug 28 10:42:18 	bandwidthd: Finished recovering 1208 records
Aug 28 10:42:18 	bandwidthd: Drawing initial graphs
Aug 28 10:42:18 	bandwidthd: Packet Encoding: Ethernet
Aug 28 10:42:18 	bandwidthd: Opening em2
Aug 28 10:42:18 	bandwidthd: Finished recovering 123 records
Aug 28 10:42:18 	bandwidthd: Recovering from log.3.0.cdf
Aug 28 10:42:18 	bandwidthd: Recovering from log.4.0.cdf
Aug 28 10:42:18 	bandwidthd: Recovering from log.1.2.cdf
Aug 28 10:42:18 	bandwidthd: Recovering from log.2.2.cdf
Aug 28 10:42:18 	bandwidthd: Monitoring subnet 192.168.5.0 with netmask 192.168.5.0
Aug 28 10:42:18 	bandwidthd: Monitoring subnet 192.168.0.0 with netmask 192.168.0.0
Aug 28 10:42:16 	php: rc.start_packages: The command '/usr/local/etc/rc.d/bandwidthd.sh stop' returned exit code '1', the output was 'No matching processes were found'
Aug 28 10:42:14 	squid[78388]: Squid Parent: (squid-1) process 78602 started
Aug 28 10:42:14 	squid[78388]: Squid Parent: will start 1 kids
Aug 28 10:42:14 	squid[77880]: Squid Parent: (squid-1) process 78063 started
Aug 28 10:42:13 	squid[77880]: Squid Parent: will start 1 kids
Aug 28 10:42:11 	squid[57908]: Squid Parent: (squid-1) process 58242 exited with status 0
Aug 28 10:42:10 	squid[60746]: Squid Parent: (squid-1) process 61166 exited with status 0
Aug 28 10:42:10 	SnortStartup[74072]: Snort START for LAN Alerting(5622_em2)...
Aug 28 10:42:07 	bandwidthd: Drawing initial graphs
Aug 28 10:42:07 	bandwidthd: Packet Encoding: Ethernet
Aug 28 10:42:07 	bandwidthd: Opening em2
Aug 28 10:42:07 	bandwidthd: Finished recovering 8648 records
Aug 28 10:42:07 	bandwidthd: Drawing initial graphs
Aug 28 10:42:07 	bandwidthd: Packet Encoding: Ethernet
Aug 28 10:42:07 	bandwidthd: Opening em2
Aug 28 10:42:07 	bandwidthd: Finished recovering 1761 records
Aug 28 10:42:07 	bandwidthd: Recovering from log.1.0.cdf
Aug 28 10:42:07 	bandwidthd: Finished recovering 4016 records
Aug 28 10:42:07 	bandwidthd: Recovering from log.2.0.cdf
Aug 28 10:42:07 	bandwidthd: Finished recovering 1131 records
Aug 28 10:42:07 	bandwidthd: Drawing initial graphs
Aug 28 10:42:07 	bandwidthd: Packet Encoding: Ethernet
Aug 28 10:42:07 	bandwidthd: Opening em2
Aug 28 10:42:07 	bandwidthd: Finished recovering 123 records
Aug 28 10:42:07 	bandwidthd: Recovering from log.2.1.cdf
Aug 28 10:42:07 	bandwidthd: Finished recovering 1208 records
Aug 28 10:42:07 	bandwidthd: Recovering from log.1.1.cdf
Aug 28 10:42:07 	bandwidthd: Finished recovering 4015 records
Aug 28 10:42:07 	bandwidthd: Recovering from log.2.2.cdf
Aug 28 10:42:07 	bandwidthd: Drawing initial graphs
Aug 28 10:42:07 	bandwidthd: Packet Encoding: Ethernet
Aug 28 10:42:07 	bandwidthd: Opening em2
Aug 28 10:42:07 	bandwidthd: Finished recovering 2696 records
Aug 28 10:42:07 	bandwidthd: Recovering from log.4.0.cdf
Aug 28 10:42:07 	bandwidthd: Recovering from log.3.0.cdf
Aug 28 10:42:07 	bandwidthd: Recovering from log.1.2.cdf
Aug 28 10:42:07 	bandwidthd: Monitoring subnet 192.168.5.0 with netmask 192.168.5.0
Aug 28 10:42:07 	bandwidthd: Monitoring subnet 192.168.0.0 with netmask 192.168.0.0
Aug 28 10:42:06 	SnortStartup[70343]: Snort START for WAN Alerting(59292_em3)...
Aug 28 10:42:06 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:42:06 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:42:06 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:42:06 	php: rc.start_packages: Not calling package sync code for dependency squidreverse of squid3-dev because some include files are missing.
Aug 28 10:42:06 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:42:06 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:42:06 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:42:06 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:42:06 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:42:06 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:42:06 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:42:06 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:42:06 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:42:06 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:42:05 	bandwidthd: Drawing initial graphs
Aug 28 10:42:05 	bandwidthd: Packet Encoding: Ethernet
Aug 28 10:42:05 	bandwidthd: Opening em2
Aug 28 10:42:05 	bandwidthd: Finished recovering 2696 records
Aug 28 10:42:05 	bandwidthd: Recovering from log.2.1.cdf
Aug 28 10:42:05 	bandwidthd: Finished recovering 1208 records
Aug 28 10:42:05 	bandwidthd: Recovering from log.2.2.cdf
Aug 28 10:42:05 	bandwidthd: Drawing initial graphs
Aug 28 10:42:05 	bandwidthd: Packet Encoding: Ethernet
Aug 28 10:42:05 	bandwidthd: Opening em2
Aug 28 10:42:05 	bandwidthd: Finished recovering 123 records
Aug 28 10:42:05 	bandwidthd: Recovering from log.4.0.cdf
Aug 28 10:42:05 	bandwidthd: Recovering from log.1.2.cdf
Aug 28 10:42:05 	bandwidthd: Recovering from log.3.0.cdf
Aug 28 10:42:05 	bandwidthd: Monitoring subnet 192.168.5.0 with netmask 192.168.5.0
Aug 28 10:42:05 	bandwidthd: Monitoring subnet 192.168.0.0 with netmask 192.168.0.0
Aug 28 10:42:04 	kernel: em3: promiscuous mode enabled
Aug 28 10:42:03 	php: rc.start_packages: The command '/usr/local/etc/rc.d/bandwidthd.sh stop' returned exit code '1', the output was 'No matching processes were found'
Aug 28 10:42:03 	check_reload_status: Syncing firewall
Aug 28 10:42:01 	php: rc.start_packages: XML error: SYSTEM or PUBLIC, the URI is missing at line 1 in /usr/local/pkg/ipmitool.xml
Aug 28 10:42:01 	php: rc.start_packages: XML error: SYSTEM or PUBLIC, the URI is missing at line 1 in /usr/local/pkg/ipmitool.xml
Aug 28 10:42:01 	squid[60746]: Squid Parent: (squid-1) process 61166 started
Aug 28 10:42:01 	squid[60746]: Squid Parent: will start 1 kids
Aug 28 10:42:01 	squid[57908]: Squid Parent: (squid-1) process 58242 started
Aug 28 10:42:01 	squid[57908]: Squid Parent: will start 1 kids
Aug 28 10:42:00 	upsmon[42711]: Communications with UPS APC_Back-UPS_ES550@localhost established
Aug 28 10:42:00 	upsd[42078]: User monuser@127.0.0.1 logged into UPS [APC_Back-UPS_ES550]
Aug 28 10:41:59 	php: rc.start_packages: No pfBlocker action during boot process.
Aug 28 10:41:59 	php: rc.start_packages: No pfBlocker action during boot process.
Aug 28 10:41:59 	php: rc.start_packages: No pfBlocker action during boot process.
Aug 28 10:41:59 	php: rc.start_packages: No pfBlocker action during boot process.
Aug 28 10:41:58 	squid[33548]: Squid Parent: (squid-1) process 33781 exited with status 0
Aug 28 10:41:58 	squid[32797]: Squid Parent: (squid-1) process 33693 exited with status 0
Aug 28 10:41:57 	php: rc.start_packages: XML error: SYSTEM or PUBLIC, the URI is missing at line 1 in /usr/local/pkg/urlsnarf.xml
Aug 28 10:41:57 	php: rc.start_packages: XML error: SYSTEM or PUBLIC, the URI is missing at line 1 in /usr/local/pkg/urlsnarf.xml
Aug 28 10:41:55 	php: rc.start_packages: XML error: SYSTEM or PUBLIC, the URI is missing at line 1 in /usr/local/pkg/iftop.xml
Aug 28 10:41:55 	php: rc.start_packages: XML error: SYSTEM or PUBLIC, the URI is missing at line 1 in /usr/local/pkg/iftop.xml
Aug 28 10:41:55 	upsmon[42711]: Communications with UPS APC_Back-UPS_ES550@localhost lost
Aug 28 10:41:55 	upsmon[42711]: Poll UPS [APC_Back-UPS_ES550@localhost] failed - Write error: Operation not permitted
Aug 28 10:41:54 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:41:54 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:41:54 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:41:54 	php: rc.start_packages: Not calling package sync code for dependency squidreverse of squid3-dev because some include files are missing.
Aug 28 10:41:54 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:41:53 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:41:53 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:41:53 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:41:53 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:41:53 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:41:53 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:41:53 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:41:53 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:41:53 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:41:50 	upsd[42078]: User monuser@127.0.0.1 logged into UPS [APC_Back-UPS_ES550]
Aug 28 10:41:50 	upsmon[42403]: Startup successful
Aug 28 10:41:50 	upsd[42078]: Startup successful
Aug 28 10:41:50 	upsd[41895]: Connected to UPS [APC_Back-UPS_ES550]: usbhid-ups-APC_Back-UPS_ES550
Aug 28 10:41:50 	upsd[41895]: listening on 127.0.0.1 port 3493
Aug 28 10:41:50 	upsd[41895]: listening on ::1 port 3493
Aug 28 10:41:50 	usbhid-ups[41650]: Startup successful
Aug 28 10:41:49 	php: rc.start_packages: XML error: SYSTEM or PUBLIC, the URI is missing at line 1 in /usr/local/pkg/ipmitool.xml
Aug 28 10:41:49 	php: rc.start_packages: XML error: SYSTEM or PUBLIC, the URI is missing at line 1 in /usr/local/pkg/ipmitool.xml
Aug 28 10:41:47 	php: rc.start_packages: No pfBlocker action during boot process.
Aug 28 10:41:47 	php: rc.start_packages: No pfBlocker action during boot process.
Aug 28 10:41:47 	php: rc.start_packages: No pfBlocker action during boot process.
Aug 28 10:41:47 	php: rc.start_packages: No pfBlocker action during boot process.
Aug 28 10:41:45 	php: rc.start_packages: XML error: SYSTEM or PUBLIC, the URI is missing at line 1 in /usr/local/pkg/urlsnarf.xml
Aug 28 10:41:45 	php: rc.start_packages: XML error: SYSTEM or PUBLIC, the URI is missing at line 1 in /usr/local/pkg/urlsnarf.xml
Aug 28 10:41:44 	usbhid-ups[81311]: Signal 15: exiting
Aug 28 10:41:44 	upsd[81483]: Signal 15: exiting
Aug 28 10:41:44 	upsd[81483]: mainloop: Interrupted system call
Aug 28 10:41:43 	upsd[81483]: User monuser@127.0.0.1 logged out from UPS [APC_Back-UPS_ES550]
Aug 28 10:41:43 	upsmon[82138]: Signal 15: exiting
Aug 28 10:41:43 	kernel: em0_vlan5: promiscuous mode enabled
Aug 28 10:41:43 	kernel: em0: promiscuous mode enabled
Aug 28 10:41:42 	php: rc.start_packages: XML error: SYSTEM or PUBLIC, the URI is missing at line 1 in /usr/local/pkg/iftop.xml
Aug 28 10:41:42 	php: rc.start_packages: XML error: SYSTEM or PUBLIC, the URI is missing at line 1 in /usr/local/pkg/iftop.xml
Aug 28 10:41:41 	SnortStartup[91233]: Snort START for WAN Blocking(60770_em3)...
Aug 28 10:41:41 	kernel: em0_vlan5: promiscuous mode disabled
Aug 28 10:41:41 	kernel: em0: promiscuous mode disabled
Aug 28 10:41:37 	upsd[81483]: User monuser@127.0.0.1 logged into UPS [APC_Back-UPS_ES550]
Aug 28 10:41:37 	upsmon[81868]: Startup successful
Aug 28 10:41:37 	upsd[81483]: Startup successful
Aug 28 10:41:37 	upsd[81321]: Connected to UPS [APC_Back-UPS_ES550]: usbhid-ups-APC_Back-UPS_ES550
Aug 28 10:41:37 	upsd[81321]: listening on 127.0.0.1 port 3493
Aug 28 10:41:37 	upsd[81321]: listening on ::1 port 3493
Aug 28 10:41:37 	usbhid-ups[81311]: Startup successful
Aug 28 10:41:36 	check_reload_status: Syncing firewall
Aug 28 10:41:36 	snort[81642]: *** Caught Term-Signal
Aug 28 10:41:35 	SnortStartup[78667]: Snort STOP for WLAN Guest Alerting(63656_em0_vlan5)...
Aug 28 10:41:32 	usbhid-ups[60672]: Signal 15: exiting
Aug 28 10:41:32 	upsd[61343]: Signal 15: exiting
Aug 28 10:41:32 	upsd[61343]: mainloop: Interrupted system call
Aug 28 10:41:32 	upsd[61343]: User monuser@127.0.0.1 logged out from UPS [APC_Back-UPS_ES550]
Aug 28 10:41:32 	upsmon[61642]: Signal 15: exiting
Aug 28 10:41:31 	kernel: em2: promiscuous mode disabled
Aug 28 10:41:31 	snort[57737]: *** Caught Term-Signal
Aug 28 10:41:31 	SnortStartup[67098]: Snort STOP for LAN Alerting(5622_em2)...
Aug 28 10:41:28 	php: rc.start_packages: Restarting/Starting all packages.
Aug 28 10:41:28 	kernel: em3: promiscuous mode disabled
Aug 28 10:41:28 	snort[56544]: *** Caught Term-Signal
Aug 28 10:41:27 	SnortStartup[59861]: Snort STOP for WAN Alerting(59292_em3)...
Aug 28 10:41:24 	snort[53396]: *** Caught Term-Signal
Aug 28 10:41:23 	SnortStartup[56750]: Snort STOP for WAN Blocking(60770_em3)...
Aug 28 10:41:21 	php: rc.newwanip: pfSense package system has detected an ip change 172.16.50.1 -> 172.16.50.1 ... Restarting packages.
Aug 28 10:41:21 	php: rc.newwanip: pfSense package system has detected an ip change 192.168.200.1 -> 192.168.200.1 ... Restarting packages.
Aug 28 10:41:19 	php: rc.newwanip: Creating rrd update script
Aug 28 10:41:18 	php: rc.newwanip: Creating rrd update script
Aug 28 10:41:15 	php: rc.start_packages: Restarting/Starting all packages.
Aug 28 10:41:13 	php: rc.newwanip: rc.newwanip: on (IP address: 172.16.50.1) (interface: opt2) (real interface: ovpns2).
Aug 28 10:41:13 	php: rc.newwanip: rc.newwanip: Informational is starting ovpns2.
Aug 28 10:41:13 	php: rc.newwanip: rc.newwanip: on (IP address: 192.168.200.1) (interface: opt1) (real interface: ovpns1).
Aug 28 10:41:13 	php: rc.newwanip: rc.newwanip: Informational is starting ovpns1.
Aug 28 10:41:13 	ntpd_intres[52667]: ntpd exiting on signal 15
Aug 28 10:41:12 	check_reload_status: Starting packages
Aug 28 10:41:12 	php: rc.newwanip: pfSense package system has detected an ip change x.x.210.112 -> x.x.210.112 ... Restarting packages.
Aug 28 10:41:10 	check_reload_status: rc.newwanip starting ovpns2
Aug 28 10:41:10 	kernel: ovpns2: link state changed to UP
Aug 28 10:41:10 	bandwidthd: Drawing initial graphs
Aug 28 10:41:10 	bandwidthd: Packet Encoding: Ethernet
Aug 28 10:41:10 	bandwidthd: Opening em2
Aug 28 10:41:10 	php: rc.newwanip: Creating rrd update script
Aug 28 10:41:10 	bandwidthd: Finished recovering 1761 records
Aug 28 10:41:10 	bandwidthd: Drawing initial graphs
Aug 28 10:41:10 	bandwidthd: Packet Encoding: Ethernet
Aug 28 10:41:10 	bandwidthd: Opening em2
Aug 28 10:41:10 	bandwidthd: Finished recovering 8648 records
Aug 28 10:41:10 	bandwidthd: Recovering from log.1.0.cdf
Aug 28 10:41:10 	bandwidthd: Finished recovering 4016 records
Aug 28 10:41:10 	bandwidthd: Recovering from log.1.1.cdf
Aug 28 10:41:10 	bandwidthd: Finished recovering 4015 records
Aug 28 10:41:10 	bandwidthd: Drawing initial graphs
Aug 28 10:41:10 	bandwidthd: Packet Encoding: Ethernet
Aug 28 10:41:10 	bandwidthd: Opening em2
Aug 28 10:41:10 	bandwidthd: Finished recovering 2696 records
Aug 28 10:41:10 	bandwidthd: Recovering from log.2.0.cdf
Aug 28 10:41:10 	bandwidthd: Finished recovering 1131 records
Aug 28 10:41:10 	bandwidthd: Recovering from log.2.1.cdf
Aug 28 10:41:10 	bandwidthd: Finished recovering 1208 records
Aug 28 10:41:10 	bandwidthd: Drawing initial graphs
Aug 28 10:41:10 	bandwidthd: Packet Encoding: Ethernet
Aug 28 10:41:10 	bandwidthd: Opening em2
Aug 28 10:41:10 	bandwidthd: Finished recovering 123 records
Aug 28 10:41:10 	bandwidthd: Recovering from log.1.2.cdf
Aug 28 10:41:10 	bandwidthd: Recovering from log.4.0.cdf
Aug 28 10:41:10 	bandwidthd: Recovering from log.2.2.cdf
Aug 28 10:41:10 	bandwidthd: Recovering from log.3.0.cdf
Aug 28 10:41:10 	bandwidthd: Monitoring subnet 192.168.5.0 with netmask 192.168.5.0
Aug 28 10:41:10 	bandwidthd: Monitoring subnet 192.168.0.0 with netmask 192.168.0.0
Aug 28 10:41:10 	check_reload_status: rc.newwanip starting ovpns1
Aug 28 10:41:10 	kernel: ovpns2: link state changed to DOWN
Aug 28 10:41:10 	kernel: in6_purgeaddr: node-local all-nodesmulticast address deletion error
Aug 28 10:41:10 	kernel: ovpns1: link state changed to UP
Aug 28 10:41:10 	check_reload_status: Reloading filter
Aug 28 10:41:10 	php: rc.newwanip: Resyncing OpenVPN instances for interface WAN.
Aug 28 10:41:08 	bandwidthd: Drawing initial graphs
Aug 28 10:41:08 	bandwidthd: Packet Encoding: Ethernet
Aug 28 10:41:08 	bandwidthd: Opening em2
Aug 28 10:41:08 	bandwidthd: Finished recovering 8648 records
Aug 28 10:41:08 	bandwidthd: Drawing initial graphs
Aug 28 10:41:08 	bandwidthd: Packet Encoding: Ethernet
Aug 28 10:41:08 	bandwidthd: Opening em2
Aug 28 10:41:08 	bandwidthd: Drawing initial graphs
Aug 28 10:41:08 	bandwidthd: Finished recovering 1761 records
Aug 28 10:41:08 	bandwidthd: Packet Encoding: Ethernet
Aug 28 10:41:08 	bandwidthd: Recovering from log.1.0.cdf
Aug 28 10:41:08 	bandwidthd: Opening em2
Aug 28 10:41:08 	bandwidthd: Finished recovering 4016 records
Aug 28 10:41:08 	bandwidthd: Finished recovering 2696 records
Aug 28 10:41:08 	bandwidthd: Recovering from log.1.1.cdf
Aug 28 10:41:08 	bandwidthd: Recovering from log.3.0.cdf
Aug 28 10:41:08 	bandwidthd: Finished recovering 4015 records
Aug 28 10:41:08 	bandwidthd: Drawing initial graphs
Aug 28 10:41:08 	bandwidthd: Packet Encoding: Ethernet
Aug 28 10:41:08 	bandwidthd: Opening em2
Aug 28 10:41:08 	bandwidthd: Finished recovering 123 records
Aug 28 10:41:08 	bandwidthd: Recovering from log.4.0.cdf
Aug 28 10:41:08 	bandwidthd: Recovering from log.2.0.cdf
Aug 28 10:41:08 	bandwidthd: Finished recovering 1131 records
Aug 28 10:41:08 	bandwidthd: Recovering from log.2.1.cdf
Aug 28 10:41:08 	bandwidthd: Finished recovering 1208 records
Aug 28 10:41:08 	bandwidthd: Recovering from log.1.2.cdf
Aug 28 10:41:08 	bandwidthd: Recovering from log.2.2.cdf
Aug 28 10:41:08 	bandwidthd: Monitoring subnet 192.168.5.0 with netmask 192.168.5.0
Aug 28 10:41:08 	bandwidthd: Monitoring subnet 192.168.0.0 with netmask 192.168.0.0
Aug 28 10:41:08 	php: rc.start_packages: The command '/usr/local/etc/rc.d/bandwidthd.sh stop' returned exit code '1', the output was 'No matching processes were found'
Aug 28 10:41:06 	php: rc.start_packages: The command '/usr/local/etc/rc.d/bandwidthd.sh stop' returned exit code '1', the output was 'No matching processes were found'
Aug 28 10:41:06 	check_reload_status: Syncing firewall
Aug 28 10:41:05 	lighttpd[21678]: (connections.c.305) SSL: 1 error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol
Aug 28 10:41:04 	squid[33548]: Squid Parent: (squid-1) process 33781 started
Aug 28 10:41:04 	squid[32797]: Squid Parent: (squid-1) process 33693 started
Aug 28 10:41:04 	squid[33548]: Squid Parent: will start 1 kids
Aug 28 10:41:04 	squid[32797]: Squid Parent: will start 1 kids
Aug 28 10:41:01 	php: rc.start_packages: The command '/usr/local/etc/rc.d/squid.sh stop' returned exit code '1', the output was ''
Aug 28 10:41:01 	squid[80084]: Squid Parent: (squid-1) process 80621 exited with status 0
Aug 28 10:41:01 	check_reload_status: updating dyndns wan
Aug 28 10:41:01 	squid[80808]: Squid Parent: (squid-1) process 81403 exited with status 0
Aug 28 10:40:59 	dhcpleases: Could not deliver signal HUP to process because its pidfile does not exist, No such process.
Aug 28 10:40:58 	php: rc.newwanip: ROUTING: setting default route to x.x.208.1
Aug 28 10:40:58 	php: rc.newwanip: ROUTING: setting IPv6 default route to 2001:470:x:x::1
Aug 28 10:40:58 	kernel: in6_purgeaddr: link-local all-nodesmulticast address deletion error
Aug 28 10:40:58 	php: rc.newwanip: ROUTING: setting IPv6 default route to 2001:470:x:x::1
Aug 28 10:40:58 	php: rc.newwanip: The command '/sbin/ifconfig 'gif0' inet delete' returned exit code '1', the output was 'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address'
Aug 28 10:40:58 	php: rc.newwanip: The command '/sbin/ifconfig 'gif0' inet delete' returned exit code '1', the output was 'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address'
Aug 28 10:40:58 	php: rc.newwanip: ROUTING: setting IPv6 default route to 2001:470:x:x::1
Aug 28 10:40:58 	dhcpleases: Could not deliver signal HUP to process because its pidfile does not exist, No such process.
Aug 28 10:40:58 	kernel: in6_purgeaddr: link-local all-nodesmulticast address deletion error
Aug 28 10:40:58 	kernel: in6_purgeaddr: link-local all-nodesmulticast address deletion error
Aug 28 10:40:58 	php: rc.newwanip: ROUTING: setting IPv6 default route to 2001:470:x:x::1
Aug 28 10:40:58 	php: rc.newwanip: rc.newwanip: on (IP address: x.x.210.112) (interface: wan) (real interface: em3).
Aug 28 10:40:58 	php: rc.newwanip: rc.newwanip: Informational is starting em3.
Aug 28 10:40:57 	lighttpd[21678]: (connections.c.305) SSL: 1 error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol
Aug 28 10:40:56 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:40:56 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:40:56 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:40:56 	php: rc.start_packages: Not calling package sync code for dependency squidreverse of squid3-dev because some include files are missing.
Aug 28 10:40:56 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:40:56 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:40:56 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:40:56 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:40:56 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:40:56 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:40:56 	php: rc.linkup: ROUTING: setting default route to x.x.208.1
Aug 28 10:40:56 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:40:56 	kernel: if_rtdel: error 3
Aug 28 10:40:56 	kernel: in6_purgeaddr: link-local all-nodesmulticast address deletion error
Aug 28 10:40:56 	kernel:
Aug 28 10:40:56 	php: rc.linkup: ROUTING: setting IPv6 default route to 2001:470:x:x::1
Aug 28 10:40:56 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:40:56 	check_reload_status: rc.newwanip starting em3
Aug 28 10:40:56 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:40:55 	php: rc.start_packages: [Squid] - Squid_resync function call pr:1 bp:1 rpc:no
Aug 28 10:40:54 	upsmon[61642]: Communications with UPS APC_Back-UPS_ES550@localhost established
Aug 28 10:40:54 	upsd[61343]: User monuser@127.0.0.1 logged into UPS [APC_Back-UPS_ES550]
Aug 28 10:40:51 	php: rc.start_packages: XML error: SYSTEM or PUBLIC, the URI is missing at line 1 in /usr/local/pkg/ipmitool.xml
Aug 28 10:40:51 	php: rc.start_packages: XML error: SYSTEM or PUBLIC, the URI is missing at line 1 in /usr/local/pkg/ipmitool.xml
Aug 28 10:40:49 	upsmon[61642]: Communications with UPS APC_Back-UPS_ES550@localhost lost
Aug 28 10:40:49 	upsmon[61642]: Poll UPS [APC_Back-UPS_ES550@localhost] failed - Write error: Operation not permitted
Aug 28 10:40:49 	php: rc.start_packages: No pfBlocker action during boot process.
Aug 28 10:40:49 	php: rc.start_packages: No pfBlocker action during boot process.
Aug 28 10:40:49 	php: rc.start_packages: No pfBlocker action during boot process.
Aug 28 10:40:49 	php: rc.start_packages: No pfBlocker action during boot process.
Aug 28 10:40:47 	php: rc.start_packages: XML error: SYSTEM or PUBLIC, the URI is missing at line 1 in /usr/local/pkg/urlsnarf.xml
Aug 28 10:40:47 	php: rc.start_packages: XML error: SYSTEM or PUBLIC, the URI is missing at line 1 in /usr/local/pkg/urlsnarf.xml
Aug 28 10:40:45 	php: rc.start_packages: XML error: SYSTEM or PUBLIC, the URI is missing at line 1 in /usr/local/pkg/iftop.xml
Aug 28 10:40:45 	php: rc.start_packages: XML error: SYSTEM or PUBLIC, the URI is missing at line 1 in /usr/local/pkg/iftop.xml
Aug 28 10:40:42 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Aug 28 10:40:42 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Aug 28 10:40:42 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:42 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:42 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:42 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:42 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:42 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:42 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:42 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:42 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:42 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:42 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:42 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:42 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:42 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:39 	upsd[61343]: User monuser@127.0.0.1 logged into UPS [APC_Back-UPS_ES550]
Aug 28 10:40:39 	upsmon[61581]: Startup successful
Aug 28 10:40:39 	upsd[61343]: Startup successful
Aug 28 10:40:39 	upsd[61014]: Connected to UPS [APC_Back-UPS_ES550]: usbhid-ups-APC_Back-UPS_ES550
Aug 28 10:40:39 	upsd[61014]: listening on 127.0.0.1 port 3493
Aug 28 10:40:39 	upsd[61014]: listening on ::1 port 3493
Aug 28 10:40:39 	usbhid-ups[60672]: Startup successful
Aug 28 10:40:37 	ntpd_intres[52667]: host name not found: 3.pool.ntp.org
Aug 28 10:40:37 	ntpd_intres[52667]: host name not found: 2.pool.ntp.org
Aug 28 10:40:37 	ntpd_intres[52667]: host name not found: 1.pool.ntp.org
Aug 28 10:40:37 	ntpd_intres[52667]: host name not found: 0.pool.ntp.org
Aug 28 10:40:36 	php: rc.filter_configure_sync: Message sent to cino@com OK
Aug 28 10:40:34 	usbhid-ups[46776]: Signal 15: exiting
Aug 28 10:40:34 	upsd[46865]: Signal 15: exiting
Aug 28 10:40:34 	upsd[46865]: mainloop: Interrupted system call
Aug 28 10:40:34 	upsd[46865]: User monuser@127.0.0.1 logged out from UPS [APC_Back-UPS_ES550]
Aug 28 10:40:34 	upsmon[46997]: Signal 15: exiting
Aug 28 10:40:31 	dhcpleases: Could not deliver signal HUP to process because its pidfile does not exist, No such process.
Aug 28 10:40:31 	php: rc.filter_configure_sync: New alert found: There were error(s) loading the rules: pfctl: DIOCADDALTQ: Device busy - The line in question reads [0]:
Aug 28 10:40:30 	php: rc.linkup: The command '/sbin/ifconfig 'em3' inet delete' returned exit code '1', the output was 'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address'
Aug 28 10:40:30 	php: rc.linkup: HOTPLUG: Configuring interface wan
Aug 28 10:40:30 	php: rc.linkup: DEVD Ethernet attached event for wan
Aug 28 10:40:28 	kernel: rn_addmask: mask impossibly already in tree
Aug 28 10:40:28 	php: rc.linkup: ROUTING: setting IPv6 default route to 2001:470:x:x::1
Aug 28 10:40:28 	check_reload_status: updating dyndns wan
Aug 28 10:40:28 	php: rc.linkup: The command '/sbin/ifconfig gif0 tunnel x.x.161.14' returned exit code '1', the output was 'ifconfig: 'tunnel' requires 2 arguments'
Aug 28 10:40:28 	php: rc.linkup: The command '/sbin/dhclient -c /var/etc/dhclient_wan.conf em3 > /tmp/em3_output 2> /tmp/em3_error_output' returned exit code '15', the output was ''
Aug 28 10:40:28 	php: rc.linkup: DEVD Ethernet detached event for wan
Aug 28 10:40:27 	check_reload_status: Syncing firewall
Aug 28 10:40:27 	kernel: em3: link state changed to UP
Aug 28 10:40:27 	check_reload_status: Linkup starting em3
Aug 28 10:40:25 	dhcpleases: Could not deliver signal HUP to process because its pidfile does not exist, No such process.
Aug 28 10:40:25 	php: rc.linkup: The command '/sbin/ifconfig 'em3' inet delete' returned exit code '1', the output was 'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address'
Aug 28 10:40:25 	php: rc.linkup: HOTPLUG: Configuring interface wan
Aug 28 10:40:25 	php: rc.linkup: DEVD Ethernet attached event for wan
Aug 28 10:40:24 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Aug 28 10:40:24 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Aug 28 10:40:24 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:24 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:24 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:24 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:24 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:24 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:24 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:24 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:24 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:24 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:24 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:24 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:24 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:24 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:23 	kernel: em3: link state changed to DOWN
Aug 28 10:40:23 	check_reload_status: Linkup starting em3
Aug 28 10:40:22 	kernel: em3: link state changed to UP
Aug 28 10:40:22 	check_reload_status: Linkup starting em3
Aug 28 10:40:22 	php: rc.linkup: ROUTING: setting IPv6 default route to 2001:470:x:x::1
Aug 28 10:40:22 	php: rc.linkup: The command '/sbin/ifconfig gif0 tunnel x.x.161.14' returned exit code '1', the output was 'ifconfig: 'tunnel' requires 2 arguments'
Aug 28 10:40:22 	php: rc.linkup: The command '/sbin/dhclient -c /var/etc/dhclient_wan.conf em3 > /tmp/em3_output 2> /tmp/em3_error_output' returned exit code '15', the output was ''
Aug 28 10:40:22 	php: rc.linkup: DEVD Ethernet detached event for wan
Aug 28 10:40:19 	kernel: em3: link state changed to DOWN
Aug 28 10:40:19 	check_reload_status: Linkup starting em3
Aug 28 10:40:19 	sshd[37303]: fatal: Write failed: Operation not permitted
Aug 28 10:40:19 	sshd[37303]: fatal: Write failed: Operation not permitted
Aug 28 10:40:19 	php: rc.start_packages: Restarting/Starting all packages.
Aug 28 10:40:17 	sshlockout[6346]: sshlockout/webConfigurator v3.0 starting up
Aug 28 10:40:17 	sshd[53059]: fatal: Write failed: Operation not permitted
Aug 28 10:40:17 	sshd[53059]: fatal: Write failed: Operation not permitted
Aug 28 10:40:16 	check_reload_status: Starting packages
Aug 28 10:40:16 	php: rc.newwanip: pfSense package system has detected an ip change 172.16.50.1 -> 172.16.50.1 ... Restarting packages.
Aug 28 10:40:14 	php: rc.newwanip: Creating rrd update script
Aug 28 10:40:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Aug 28 10:40:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (opt1).
Aug 28 10:40:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:11 	php: rc.filter_configure_sync: Could not find IPv4 gateway for interface (wan).
Aug 28 10:40:09 	php: rc.newwanip: rc.newwanip: on (IP address: 172.16.50.1) (interface: opt2) (real interface: ovpns2).
Aug 28 10:40:09 	php: rc.newwanip: rc.newwanip: Informational is starting ovpns2.
Aug 28 10:40:06 	check_reload_status: rc.newwanip starting ovpns2
Aug 28 10:40:06 	kernel: ovpns2: link state changed to UP
Aug 28 10:40:06 	kernel: ovpns2: link state changed to DOWN
Aug 28 10:40:06 	kernel: in6_purgeaddr: node-local all-nodesmulticast address deletion error
Aug 28 10:40:06 	php: rc.openvpn: OpenVPN: Resync server2 Site-to-Site VPN
Aug 28 10:40:06 	kernel: ovpns1: link state changed to DOWN
Aug 28 10:40:06 	kernel: arpresolve: can't allocate llinfo for x.x.208.1
Aug 28 10:40:05 	php: rc.openvpn: OpenVPN: Resync server1 Road Warrior OpenVPN
Aug 28 10:40:05 	php: rc.openvpn: OpenVPN: One or more OpenVPN tunnel endpoints may have changed its IP. Reloading endpoints that may use WAN_DHCP.
Aug 28 10:40:03 	check_reload_status: Reloading filter
Aug 28 10:40:03 	check_reload_status: Restarting OpenVPN tunnels/interfaces
Aug 28 10:40:03 	check_reload_status: Restarting ipsec tunnels
Aug 28 10:40:03 	check_reload_status: updating dyndns WAN_DHCP
Aug 28 10:39:55 	kernel: arpresolve: can't allocate llinfo for x.x.208.1
Aug 28 10:39:50 	check_reload_status: updating dyndns wan
Aug 28 10:39:47 	dhcpleases: Could not deliver signal HUP to process because its pidfile does not exist, No such process.
Aug 28 10:39:47 	php: rc.linkup: The command '/sbin/ifconfig 'em3' inet delete' returned exit code '1', the output was 'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address'
Aug 28 10:39:47 	php: rc.linkup: HOTPLUG: Configuring interface wan
Aug 28 10:39:47 	php: rc.linkup: DEVD Ethernet attached event for wan
Aug 28 10:39:45 	kernel: arpresolve: can't allocate llinfo for x.x.208.1
Aug 28 10:39:45 	kernel: em3: link state changed to UP
Aug 28 10:39:45 	check_reload_status: Linkup starting em3
Aug 28 10:39:44 	php: rc.linkup: ROUTING: setting IPv6 default route to 2001:470:x:x::1
Aug 28 10:39:44 	php: rc.linkup: The command '/sbin/ifconfig gif0 tunnel x.x.161.14' returned exit code '1', the output was 'ifconfig: 'tunnel' requires 2 arguments'
Aug 28 10:39:44 	php: rc.linkup: The command '/sbin/dhclient -c /var/etc/dhclient_wan.conf em3 > /tmp/em3_output 2> /tmp/em3_error_output' returned exit code '15', the output was ''
Aug 28 10:39:44 	php: rc.linkup: DEVD Ethernet detached event for wan
Aug 28 10:39:42 	kernel: em3: link state changed to DOWN
Aug 28 10:39:42 	check_reload_status: Linkup starting em3
Aug 28 10:39:35 	kernel: arpresolve: can't allocate llinfo for x.x.208.1
Aug 28 10:39:31 	php: rc.linkup: The command '/sbin/ifconfig 'em3' inet delete' returned exit code '1', the output was 'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address'
Aug 28 10:39:31 	php: rc.linkup: HOTPLUG: Configuring interface wan
Aug 28 10:39:31 	php: rc.linkup: DEVD Ethernet attached event for wan
Aug 28 10:39:29 	php: rc.linkup: Clearing states to old gateway x.x.208.1.
Aug 28 10:39:29 	kernel: em3: link state changed to UP
Aug 28 10:39:29 	check_reload_status: Linkup starting em3
Aug 28 10:39:28 	php: rc.linkup: DEVD Ethernet detached event for wan
Aug 28 10:39:26 	kernel: em3: link state changed to DOWN
Aug 28 10:39:26 	check_reload_status: Linkup starting em3
Aug 28 10:29:46 	syslogd: kernel boot file is /boot/kernel/kernel

                                            Snort Processes after WAN interface was bounced

                                            
root    4146  0.3  3.7 376720 114452  ??  SNs  10:42AM   0:01.01 /usr/pbi/snort-i386/bin/snort -R 60770 -D -q -l /var/log/snort/snort_em360770 --pid-path /var/run --nolock-pidfile -G 60770 -c /usr/pbi/snort-i386/et
root    8189  0.1  3.7 376720 114308  ??  SNs  10:43AM   0:01.03 /usr/pbi/snort-i386/bin/snort -R 60770 -D -q -l /var/log/snort/snort_em360770 --pid-path /var/run --nolock-pidfile -G 60770 -c /usr/pbi/snort-i386/et
root    7005  0.0  1.6 317552 48632  ??  SNs  10:43AM   0:00.36 /usr/pbi/snort-i386/bin/snort -R 59292 -D -q -l /var/log/snort/snort_em359292 --pid-path /var/run --nolock-pidfile -G 59292 -c /usr/pbi/snort-i386/et
root    9784  0.0  2.9 360560 91932  ??  SNs  10:43AM   0:00.69 /usr/pbi/snort-i386/bin/snort -R 5622 -D -q -l /var/log/snort/snort_em25622 --pid-path /var/run --nolock-pidfile -G 5622 -c /usr/pbi/snort-i386/etc/s
root   11440  0.0  2.9 360560 92036  ??  SNs  10:43AM   0:00.70 /usr/pbi/snort-i386/bin/snort -R 5622 -D -q -l /var/log/snort/snort_em25622 --pid-path /var/run --nolock-pidfile -G 5622 -c /usr/pbi/snort-i386/etc/s
root   70314  0.0  2.9 359584 91004  ??  SNs  10:42AM   0:00.07 /usr/pbi/snort-i386/bin/snort -R 63656 -D -q -l /var/log/snort/snort_em0_vlan563656 --pid-path /var/run --nolock-pidfile -G 63656 -c /usr/pbi/snort-i

                                            snort_em360770 WAN Blocking
                                            snort_em359292 WAN Alerting
                                            snort_em25622 LAN Alerting
                                            snort_em0_vlan563656 Guest WiFi Alerting

                                            Stephen

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post