Apinger only working on wan 8/6/13 64bit snapshot
-
It's not exactly 0ms and it goes up on some interfaces.
-
2.1-RC1 (i386)
built on Thu Aug 15 16:30:19 EDT 2013
FreeBSD 8.3-RELEASE-p92 multi-WAN systems are on this snap now. Gateway status is reporting reasonable latency numbers, and RRD quality numbers also look OK. I only have IPv4 and 2 gateways on each, so I can't speak for IPv6 or more complex systems with more gateways.
-
The lack of failover working seems to be this:
http://redmine.pfsense.org/issues/31462.1-RC1 (amd64)
built on Thu Aug 15 16:30:12 EDT 2013
FreeBSD 8.3-RELEASE-p9Failover (internet) is working again!
Unfortunately squid proxy failover (http://forum.pfsense.org/index.php/topic,60977.0.html) does not.
Maybe this is off topic (it's not due to apinger issues) but I cant find any help to get it works on 2.1. -
It's not related. Keep it out of this thread.
-
After updating to the latest release
2.1-RC1 (amd64)
built on Thu Aug 15 03:12:29 EDT 2013
FreeBSD 8.3-RELEASE-p9the fast interfaces still shows 0ms instead of 0.400 on dashboard and RRD.
Same here. But on today's snapshot.
2.1-RC1 (i386)
built on Fri Aug 16 16:28:22 EDT 2013Up-until now it had been working okay.
It works with a manually entered alternate monitoring address. But not with the interfaces' gateway. The WAN interface is working okay. But the optional interface is reporting 0ms. Reality is about 0.35ms.Both interfaces are VLAN's on the same physical interface (bfe0).
-
Still showing 0ms everywhere with the Aug 17 snapshot…
-
After Ermal's last changes it should have been back to normal there, it was on my test VM. I was seeing 0.3-0.8ms reported. I rebuilt apinger again on the snapshot builders to see if maybe I missed rebuilding it one of them yesterday. Try it again later tonight/tomorrow when the next snap shows up.
-
on latest sbapshot
2.1-RC1 (amd64)
built on Sun Aug 18 19:11:51 EDT 2013
FreeBSD 8.3-RELEASE-p9my ipv6 tunnel is wrong 0.3 ms instead of 70 ish it normally is
was fine on the 16th snapshot
-
Yeah the thing seems to invent completely random figures between 0-1ms. Haven't seen any sane reality-matching value since the major rewrites started.
-
on latest sbapshot
2.1-RC1 (amd64)
built on Sun Aug 18 19:11:51 EDT 2013
FreeBSD 8.3-RELEASE-p9my ipv6 tunnel is wrong 0.3 ms instead of 70 ish it normally is
was fine on the 16th snapshot
Just upgraded to
2.1-RC1 (i386)
built on Thu Aug 22 23:23:02 EDT 2013
FreeBSD 8.3-RELEASE-p10from Aug 1 snapshot.
My IPv6 tunnel now shows 0.2ms instead of the usual 12-14ms.
-
Sounds like whatever is being pinged, it ain’t your gateway…
-
Sounds like whatever is being pinged, it ain’t your gateway…
Nice catch, you're right. It should ping out on gif0 but it's just pinging itself on lo0:
tcpdump -nvvi lo0 icmp6 tcpdump: listening on lo0, link-type NULL (BSD loopback), capture size 96 bytes 09:14:14.703602 IP6 (hlim 64, next-header ICMPv6 (58) payload length: 24) 2001:4dd0:xxxx:xxxx::2 > 2001:4dd0:xxxx:xxxx::2: [icmp6 sum ok] ICMP6, echo request, length 24, seq 26906 09:14:14.703847 IP6 (hlim 64, next-header ICMPv6 (58) payload length: 24) 2001:4dd0:xxxx:xxxx::2 > 2001:4dd0:xxxx:xxxx::2: [icmp6 sum ok] ICMP6, echo reply, length 24, seq 26906According to the config it should not:
target "2001:4dd0:xxxx:xxxx::1" { description "WAN_SixXS" srcip "2001:4dd0:xxxx:xxxx::2" alarms override "loss","delay","down"; rrd file "/var/db/rrd/WAN_SixXS-quality.rrd" } -
I'd say your follow-up was nicer than my guess - glad it panned out.
Well - That makes perfect sense now. :D
I'd guess knowing that makes it easier for a dev to fix? -
Nice catch, you're right. It should ping out on gif0 but it's just pinging itself on lo0:
Hmmm, indeed… same here. No wonder it shows insane figures, LOL.
https://redmine.pfsense.org/issues/3161
-
This should be fixed in the next snapshot (later tonight)
-
Thanks, will test ASAP. :)
-
Oh - That will make lots of people happy maybe. :)
-
lo0 interface numbers are faster. Can you please change it back?
Appearances are everything.
-
-
So, is your internet nice and laggy again? haha
