A few noob questions
-
First build here.
I have the comp and 3 NICs installed: bge0 (WAN), re0 (LAN), re1 (OPT1). I have the ethernet cable from my modem plugged into WAN and another ethernet cable running from LAN to my computer. From the install guide I should now be able to access the web interface via the default IP (192.168.1.1) and default credentials (admin, pfsense)….but I cannot.
Could one you fine folks guide me here?
-
Hmmmm. Well - I assume your LAN is set up on 192.168.1.1 The default?
Are you sure you don't have LAN and WAN confused? Or that LAN1 and LAN2 are not switched? -
Or even a simple ping for starters…
-
Got it figured out, I didnt configure DHCP properly on the LAN.