Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    IPv6 dhcp not starting

    Scheduled Pinned Locked Moved
    2.1 Snapshot Feedback and Problems - RETIRED
    5
    18
    11.2k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • O
      Ofloo
      last edited by

      thank you, aside from the fact that it crashed at least it was able to update the routing protocol what made my ipv6 block usable to me

      ps I think that there's something wrong with interfaces.inc not sure where cause the ip doesn't get updated to the webinterface, and from what i gather that's something that happens in interfaces. Maybe add some more comments to the code.

      1 Reply Last reply Reply Quote 0
      • E
        eppo
        last edited by

        It looks to me like the setup of the ipv6 WAN interface is broken.
        Instead of configuring pppoe0 in the appropriate files the underlying physical interface is used (vr2 in my case)

        After manually changing vr2 to pppoe0 in /var/etc/dhcp6c_wan.conf and /var/etc/dhcp6c_wan_script.sh ipv6 and starting dhcp6c like above ipv6 addresses are assigned and used by clients.
        Then the default has to be changed since that also is set to vr2 instead of pppoe0

        1 Reply Last reply Reply Quote 0
        • dotOneD
          dotOne
          last edited by

          In the latest snapshots you have an option to use the IPv4 interface as parent for IPv6.
          You have to use the checkbox labled "Request a IPv6 prefix/information through the IPv4 connectivity link" for this.

          Then the IPv6 information is requested through the PPPoE session.
          If you ISP only provide you with a prefix and not with an interface address you have to check the box labeled "Only request a IPv6 prefix, do not request a IPv6 address" also.

          This works perfectly. the configuration files are ok.
          Unfortunately the DHCPv6 client daemon is not started when you request the v6 info through the PPPoE session.

          1 Reply Last reply Reply Quote 0
          • E
            eppo
            last edited by

            @avink:

            In the latest snapshots you have an option to use the IPv4 interface as parent for IPv6.
            You have to use the checkbox labled "Request a IPv6 prefix/information through the IPv4 connectivity link" for this.

            Then the IPv6 information is requested through the PPPoE session.
            If you ISP only provide you with a prefix and not with an interface address you have to check the box labeled "Only request a IPv6 prefix, do not request a IPv6 address" also.

            You are right, when I tick this box the correct interface is used.

            Must say though that the wording for the checkbox is bad since there is no IPv4 involved anywhere.
            It's IPV6CP on the PPP connection.

            @avink:

            This works perfectly. the configuration files are ok.
            Unfortunately the DHCPv6 client daemon is not started when you request the v6 info through the PPPoE session.

            I can confirm this issue. I also needed to manually start dhcp6c.

            1 Reply Last reply Reply Quote 0
            • O
              Ofloo
              last edited by

              @avink:

              In the latest snapshots you have an option to use the IPv4 interface as parent for IPv6.
              You have to use the checkbox labled "Request a IPv6 prefix/information through the IPv4 connectivity link" for this.

              Then the IPv6 information is requested through the PPPoE session.
              If you ISP only provide you with a prefix and not with an interface address you have to check the box labeled "Only request a IPv6 prefix, do not request a IPv6 address" also.

              This works perfectly. the configuration files are ok.
              Unfortunately the DHCPv6 client daemon is not started when you request the v6 info through the PPPoE session.

              That box has been checked for me all the time and no it doesn't make it work ! There's something wrong, it used to work now it doesn't, right after an upgrade, …

              1 Reply Last reply Reply Quote 0
              • V
                val
                last edited by

                @Ofloo:

                @avink:

                In the latest snapshots you have an option to use the IPv4 interface as parent for IPv6.
                You have to use the checkbox labled "Request a IPv6 prefix/information through the IPv4 connectivity link" for this.

                Then the IPv6 information is requested through the PPPoE session.
                If you ISP only provide you with a prefix and not with an interface address you have to check the box labeled "Only request a IPv6 prefix, do not request a IPv6 address" also.

                This works perfectly. the configuration files are ok.
                Unfortunately the DHCPv6 client daemon is not started when you request the v6 info through the PPPoE session.

                That box has been checked for me all the time and no it doesn't make it work ! There's something wrong, it used to work now it doesn't, right after an upgrade, …

                They will need more information like in which snapshot it worked?
                I am also seeing the same thing here on my vdsl2 (pppoe) connection.

                
Sep 3 11:46:00	php: servicewatchdog_cron.php: Service Watchdog detected service radvd stopped. Restarting radvd (Router Advertisement Daemon)
Sep 3 11:45:00	php: servicewatchdog_cron.php: Service Watchdog detected service radvd stopped. Restarting radvd (Router Advertisement Daemon)
Sep 3 11:44:00	php: servicewatchdog_cron.php: Service Watchdog detected service radvd stopped. Restarting radvd (Router Advertisement Daemon)
Sep 3 11:43:00	php: servicewatchdog_cron.php: Service Watchdog detected service radvd stopped. Restarting radvd (Router Advertisement Daemon)
Sep 3 11:42:00	php: servicewatchdog_cron.php: Service Watchdog detected service radvd stopped. Restarting radvd (Router Advertisement Daemon)

                Watchdog keep trying to start up radvd every mins but fails, please let me know if I could be more of help, things like other system log and so on.
                Unfortunately I can't really say which snapshot worked as I only just started using ipv6 in latest snapshots. And the only time ipv6 worked for me was months back before RC.

                meanualy start with this command worked.

                /usr/local/sbin/dhcp6c -f -d -D -c /var/etc/dhcp6c_wan.conf -p /var/run/dhcp6c_pppoe0.pid pppoe0

                Intel Xeon E3-1225 V2 @ 3.20Ghz
                Intel S1200KPR server board mini-ITX
                A-data ECC 4GB x 2 1600MHz
                Intel Ethernet Server Adapter I350-T2
                Samsung 840 Pro 120GB
                Lian-Li PC-Q15B

                1 Reply Last reply Reply Quote 0
                • dotOneD
                  dotOne
                  last edited by

                  Currently I'm running the snapshot from July 25.

                  Last saturday I tested the snapshot from August 31 because I saw a lot of link flaps on the system (still think this is a driver issue, but that's another thread), and it had the same issue.
                  I have to start the daemon by hand.

                  1 Reply Last reply Reply Quote 0
                  • E
                    eri--
                    last edited by

                    I think that the only issue you are seeing here is that dhcp6c is started before pppoe has been connected and fails.
                    Can you confirm this is the case ?

                    1 Reply Last reply Reply Quote 0
                    • V
                      val
                      last edited by

                      @ermal:

                      I think that the only issue you are seeing here is that dhcp6c is started before pppoe has been connected and fails.
                      Can you confirm this is the case ?

                      My log was pulled after pppoe has connected for about 12hours, in that 12hours watchdog just showing the same thing every mins.
                      Unless I start it manually.

                      Intel Xeon E3-1225 V2 @ 3.20Ghz
                      Intel S1200KPR server board mini-ITX
                      A-data ECC 4GB x 2 1600MHz
                      Intel Ethernet Server Adapter I350-T2
                      Samsung 840 Pro 120GB
                      Lian-Li PC-Q15B

                      1 Reply Last reply Reply Quote 0
                      • E
                        eppo
                        last edited by

                        @ermal:

                        I think that the only issue you are seeing here is that dhcp6c is started before pppoe has been connected and fails.
                        Can you confirm this is the case ?

                        Upgraded to Sep  3 02:29:12 EDT image and can confirm dhcp6c is still not started on boot.
                        Don't know if it is dhcp6c is started to early. You can check from attached (anonymized) system.log pulled after boot and after manually starting dhcp6c

                        Then upgraded to Sep  3 14:08:44 EDT image and can confirm dhcp6c IS not started on boot.
                        (anonymized) system.log attached too.

                        system-anon_Sep-3-14:08:44.txt
                        system-anon_Sep-3-02:29:12.txt

                        1 Reply Last reply Reply Quote 0
                        • E
                          eri--
                          last edited by

                          You seem to be low on resources since php processes are getting killed all over.
                          Also can you share your configuration seems you have some strange thing in there!

                          EDIT: Can you try with todays snapshot since there were some changes done for low resource systems.

                          1 Reply Last reply Reply Quote 0
                          • E
                            eppo
                            last edited by

                            @ermal:

                            You seem to be low on resources since php processes are getting killed all over.
                            Also can you share your configuration seems you have some strange thing in there!

                            Am running pfSense on an Alix 2D13 which has 256 MB RAM. EDIT: nanoBSD version of pfSense.
                            PM sent for config.

                            @ermal:

                            EDIT: Can you try with todays snapshot since there were some changes done for low resource systems.

                            Will try later today.

                            1 Reply Last reply Reply Quote 0
                            • E
                              eri--
                              last edited by

                              Try this commit https://github.com/pfsense/pfsense/commit/d6df2c4c71678b5edd98892ca40facbb80f4ed1c manually or use a tomorrow snapshot and see if this behaves better.

                              1 Reply Last reply Reply Quote 0
                              • E
                                eppo
                                last edited by

                                Just upgraded to the "Sep 4 01:46:07" snapshot. This snapshot and the Sept 3 14:08:44 snapshot both DID start dhcp6c correctly

                                On memory usage: both Sep 3 snapshots had 8 lines with the word "kill" in them. The Sep 4 snapshot has only 3.

                                1 Reply Last reply Reply Quote 0
                                • E
                                  eppo
                                  last edited by

                                  @ermal:

                                  Try this commit https://github.com/pfsense/pfsense/commit/d6df2c4c71678b5edd98892ca40facbb80f4ed1c manually or use a tomorrow snapshot and see if this behaves better.

                                  Tried it. What should it improve? I still have 3 lines with "kill" in sysem.log and dhcp6 is started too.

                                  1 Reply Last reply Reply Quote 0
                                  • O
                                    Ofloo
                                    last edited by

                                    ok now dhcp6c doesn't crash, .. however the ipv6 routes are not working

                                    /usr/local/sbin/dhcp6c -f -d -D -c /var/etc/dhcp6c_wan.conf -p /var/run/dhcp6c_pppoe0.pid pppoe0

                                    makes them work though, ..

                                    if i do sockstat -46lp546, it shows a lot of dhcp6c clients on that port and also a php and sh script. however they keep cycling, as if they crash constantly

                                    1 Reply Last reply Reply Quote 0
                                    • First post
                                      Last post