ERROR: in ipsec between RV042 and PFbox 2.1
-
Hi
getting following error on pfbox :
ERROR: exchange Identity Protection not allowed in any applicable rmconf.getting following error on rv042:
Cannot respond to IPsec SA request because no connection is known for 0.0.0.0/0===xxx.xxx.xxx.xxx…yyy.yyy.yyy.yyy===0.0.0.0/0I have checked both sites are on Main mode
Using Pfsense 2.1 and the other Router is a RV042, haven't been able to get pfsense to work with it, can someone please post the screen shots of their settings so I can copy them.
my both sites are on static IP.
thanks!!
-
adding SS for my setup
in P2 for pfsense I just went ahead and ticked all to try everything..
i'd really prefer if it were in main mode but not even aggressive is connecting
![rv042 ipsec set.png](/public/imported_attachments/1/rv042 ipsec set.png)
![rv042 ipsec set.png_thumb](/public/imported_attachments/1/rv042 ipsec set.png_thumb)
![pfsense P1.png](/public/imported_attachments/1/pfsense P1.png)
![pfsense P1.png_thumb](/public/imported_attachments/1/pfsense P1.png_thumb)
![pfsense P2.png](/public/imported_attachments/1/pfsense P2.png)
![pfsense P2.png_thumb](/public/imported_attachments/1/pfsense P2.png_thumb) -
bump
-
You'd probably have more luck moving to whatever rv042 support venue they provide.
-
i kinda figured out what the issue was and it may be something to do with the 2.1 release, maybe a feature or gui issue which was causing this problem.
i did get it working. i will post screenshots for both sites in the morning.
EDIT: Sorry, will post SS next week as I need to travel to another city and only have access to cellphone.
anyway the issue was very simple.In Pfsense Phase1 of my identifier and peer identifier I selected my IP and peer IP tabs as I assumed it would be the default public IPs, but that was not the case. I had to select "IP address" in both tabs and manually give my and peer public IP.
it started working.
there is a lot of search for RV042 - pfsense setting screenshots, so I will make sure to put them up soon.
rgds