Snort blocks IP's regardless of the blocking settings

Guest

Pfsense 2.0.1
Snort Stable 2.9.4.6 pkg v. 2.5.9 platform: 2.0
HAVP antivirus 0.91_1 pkg v1.0
Lightsquid 1.8.0 pkg v.2.32
squid 2.7.9 pkg v.4.3.1

Hi folks,

i tested snort the first time on our pfsense appliance. The first day everything locks good. On the second day i tried the automatic blocking feature.
After 30min i disable blocking. The big problem is that snort keeping on blocking different ip's regardless of the block settings.
Restarting snort, snort-interface stop/disable or deletion wasn't successful. The only way was the uninstallation of the snort package.

How can i keeping on analysing this behaviour?

regards

Andi

bmeeks

@andib:

Pfsense 2.0.1
Snort Stable 2.9.4.6 pkg v. 2.5.9 platform: 2.0
HAVP antivirus 0.91_1 pkg v1.0
Lightsquid 1.8.0 pkg v.2.32
squid 2.7.9 pkg v.4.3.1

Hi folks,

i tested snort the first time on our pfsense appliance. The first day everything locks good. On the second day i tried the automatic blocking feature.
After 30min i disable blocking. The big problem is that snort keeping on blocking different ip's regardless of the block settings.
Restarting snort, snort-interface stop/disable or deletion wasn't successful. The only way was the uninstallation of the snort package.

How can i keeping on analysing this behaviour?

regards

Andi

For starters, read this thread (especially the posts a bit farther down about creating Suppress List entries for some http_inspect preprocessor rules).

http://forum.pfsense.org/index.php/topic,61018.0.html

Snort is not an "install and forget" package. It requires specific tuning to your environment to weed out false positives. The information in the linked thread can get you started on tuning for system.

Bill

Guest

Hi Bill,

thanks for your answer. I read this article befor installing snort. Any idea before i run my next snort test?

Could an pfsense upgrade to 2.1 give me some improvements in conjunction with snort?

Bye

Andi

Supermule

I would start by upgrading to 2.0.3 to see if the issue is still there.

If it dissapears then you can upgrade to 2.1

fragged

2.0.3 is the minimum supported version for the current Snort package from what I've gathered from bmeek's posts.

bmeeks

@fragged:

2.0.3 is the minimum supported version for the current Snort package from what I've gathered from bmeek's posts.

Yes, fragged is correct about the pfSense version. Sorry I did not notice your pfSense version in your original post. Upgrade to at least 2.0.3, and 2.1-RELEASE is even better.

Bill