2.1-RELEASE upgrade issue
-
I've recently performed a successful upgrade to 2.1 (thanks for the great work!) and all is well, except that my dashboard displays "Obtaining update status…" forever.
In "firmware / updater settings," the pull-down is visible, and I can choose "... stable updates (Current architecture)", but when I then click "Save", the pull-down reverts to the top-most (blank) choice, and I still have "Obtaining update status..." on the dashboard.
-
Did you follow jimp's steps?
in here:-
http://forum.pfsense.org/index.php/topic,66457.0.htmlAfter the upgrade happens and you are on 2.1-RELEASE, the default URL there will be the stable updates, so you can then uncheck "Use a URL server for firmware upgrades other than www.pfsense.org" at that point in time.
-
@val:
Did you follow jimp's steps?
in here:-
http://forum.pfsense.org/index.php/topic,66457.0.htmlAfter the upgrade happens and you are on 2.1-RELEASE, the default URL there will be the stable updates, so you can then uncheck "Use a URL server for firmware upgrades other than www.pfsense.org" at that point in time.
Yes. I tried it with the box checked and with the box unchecked. In neither case did it retain my pull-down choice; it always reverted to the blank choice.
-
You can always download the correct update, put it in your computer files and then use that file to upgrade.
Perhaps much easier than all this.
-
I tried again just now, and the behavior has changed.
If I choose "pfSense … stable updates (Current architecture)", and (contrary to jimp's instructions) leave "Use a URL server for firmware upgrades other than www.pfsense.org" checked with "Base URL" set to "http://updates.pfsense.org/_updaters", my dashboard now says "You are on the latest version."
Do I have it set properly now (even though I have the box checked that jimp said to leave unchecked)?
-
I'd say "good enuff" ;D
-
If I choose "pfSense … stable updates (Current architecture)", and (contrary to jimp's instructions) leave "Use a URL server for firmware upgrades other than www.pfsense.org" checked with "Base URL" set to "http://updates.pfsense.org/_updaters", my dashboard now says "You are on the latest version."
You need to leave the box checked ONCE to get the URL saved. After that, does not matter.
-
You need to leave the box checked ONCE to get the URL saved. After that, does not matter.
OK, that explains what's happening; thanks!
That little bit of user interaction probably should be made a little more clear…