Sarg Not working There is a failure
-
Where do I write this
-
-
Here is what I received
Content-type: text/html
and sarg Still not working
-
run only sarg -x on console and see what you get.
-
Here is what I received
SARG: Init SARG: Loading configuration from /usr/pbi/sarg-i386/etc/sarg/sarg.conf SARG: (info) No graphs available as sarg was not compiled with libgd. Set "graphs" to "no" in /usr/pbi/sarg-i386/etc/sarg/sarg.conf to disable this warning SARG: Chaining IP resolving module "dns" SARG: Loading exclude host file from: /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf SARG: Loading exclude file from: /usr/pbi/sarg-i386/etc/sarg/exclude_users.conf SARG: Reading host alias file "/usr/pbi/sarg-i386/etc/sarg/hostalias" SARG: List of host names to alias: SARG: Deleting temporary directory "/tmp/sarg" SARG: Parameters: SARG: Hostname or IP address (-a) = SARG: Useragent log (-b) = SARG: Exclude file (-c) = /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf SARG: Date from-until (-d) = SARG: Email address to send reports (-e) = SARG: Config file (-f) = /usr/pbi/sarg-i386/etc/sarg/sarg.conf SARG: Date format (-g) = Europe (dd/mm/yyyy) SARG: IP report (-i) = No SARG: Keep temporary files (-k) = No SARG: Input log (-l) = /var/squid/logs/access.log SARG: Resolve IP Address (-n) = Yes SARG: Output dir (-o) = /usr/local/sarg-reports/ SARG: Use Ip Address instead of userid (-p) = Yes SARG: Accessed site (-s) = SARG: Time (-t) = SARG: User (-u) = SARG: Temporary dir (-w) = /tmp/sarg SARG: Debug messages (-x) = Yes SARG: Process messages (-z) = No SARG: Previous reports to keep (--lastlog) = 24 SARG: SARG: sarg version: 2.3.6 Arp-21-2013 SARG: Loading User table: ldap SARG: Cannot bind to LDAP server: Can't contact LDAP server
-
ccesario fixed it few minutes ago, reinstall the package and try again.
-
[quote] SARG: sarg version: 2.3.6 Arp-21-2013 SARG: Loading User table: ldap SARG: Cannot bind to LDAP server: Can't contact LDAP server [/quote] You have problems with ldap settings on sarg config too.
-
I removed and re-installed
And still no change -
The LC_ALL error or ldap error?
-
Do not know
I did not know there were two failuresAfter reinstalling
I still see the two screens in the image aboveWhat has changed
I went Scheduling tab
And pressed the forced Update Now
It took a minute until it returned to the previous screen
As if he collects the reports or something -
run sarg -x on console to check if it is still complaining about LDAP options.
-
I think it's the same
SARG: Init SARG: Loading configuration from /usr/pbi/sarg-i386/etc/sarg/sarg.conf SARG: (info) No graphs available as sarg was not compiled with libgd. Set "graphs" to "no" in /usr/pbi/sarg-i386/etc/sarg/sarg.conf to disable this warning SARG: Chaining IP resolving module "dns" SARG: Loading exclude host file from: /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf SARG: Loading exclude file from: /usr/pbi/sarg-i386/etc/sarg/exclude_users.conf SARG: Reading host alias file "/usr/pbi/sarg-i386/etc/sarg/hostalias" SARG: List of host names to alias: SARG: Deleting temporary directory "/tmp/sarg" SARG: Parameters: SARG: Hostname or IP address (-a) = SARG: Useragent log (-b) = SARG: Exclude file (-c) = /usr/pbi/sarg-i386/etc/sarg/exclude_hosts.conf SARG: Date from-until (-d) = SARG: Email address to send reports (-e) = SARG: Config file (-f) = /usr/pbi/sarg-i386/etc/sarg/sarg.conf SARG: Date format (-g) = Europe (dd/mm/yyyy) SARG: IP report (-i) = No SARG: Keep temporary files (-k) = No SARG: Input log (-l) = /var/squid/logs/access.log SARG: Resolve IP Address (-n) = Yes SARG: Output dir (-o) = /usr/local/sarg-reports/ SARG: Use Ip Address instead of userid (-p) = Yes SARG: Accessed site (-s) = SARG: Time (-t) = SARG: User (-u) = SARG: Temporary dir (-w) = /tmp/sarg SARG: Debug messages (-x) = Yes SARG: Process messages (-z) = No SARG: Previous reports to keep (--lastlog) = 24 SARG: SARG: sarg version: 2.3.6 Arp-21-2013 SARG: Loading User table: ldap SARG: Cannot bind to LDAP server: Can't contact LDAP server
-
[quote] SARG: Loading User table: ldap SARG: Cannot bind to LDAP server: Can't contact LDAP server [/quote] Still problems with your ldap config on sarg gui...
-
Is it possible to fix it
Or should reinstalled -
Is it possible to fix it
What ldap settings did you configured? it's not a package issue, it's a sysadmin config issue.
-
Is it possible to fix it
What ldap settings did you configured? it's not a package issue, it's a sysadmin config issue.
what is ldap settings
and what is sysadmin config
-
Scheduling
-
sysadmin means system administrator, in this case, you.
check user tab if you have configured ldap settings.
Also, uncheck graphs on first tab, the compilation of this feature on 2.1 is still pending.
-
Same result
-
Did you read all the post and checked user tab to see if you have configured ldap settings?
Latest update by ccesario fixed sarg packages on 2.1. Check your config again please.
-
I removed the check from the graphs
and from ldap
-
Well
I installed the whole system again
Because there were some problems I could not fixAbout sarg
I reinstalled and it works well
I have a question about the configurationI want to see a list of the 48 reports
Every hour a new report
Means a list of 48 reports
When it comes Report No. 49
Then the first report is deletedThere will always be 48 Reports
Example {should see from the bottom}
11Oct2013-11Oct2013 Fri Oct 11 06:00:03 2013 When this report iis generated
11Oct2013-11Oct2013 Fri Oct 11 05:00:03 2013
11Oct2013-11Oct2013 Fri Oct 11 04:00:03 2013
11Oct2013-11Oct2013 Fri Oct 11 03:00:03 2013
11Oct2013-11Oct2013 Fri Oct 11 02:00:03 2013
11Oct2013-11Oct2013 Fri Oct 11 01:00:03 2013
11Oct2013-11Oct2013 Fri Oct 11 00:00:03 2013
10Oct2013-10Oct2013 Thu Oct 10 23:00:20 2013
10Oct2013-10Oct2013 Thu Oct 10 22:00:20 2013
10Oct2013-10Oct2013 Thu Oct 10 21:00:20 2013
10Oct2013-10Oct2013 Thu Oct 10 20:00:20 2013
10Oct2013-10Oct2013 Thu Oct 10 19:00:20 2013
10Oct2013-10Oct2013 Thu Oct 10 18:00:20 2013
10Oct2013-10Oct2013 Thu Oct 10 17:00:20 2013
10Oct2013-10Oct2013 Thu Oct 10 16:00:20 2013
10Oct2013-10Oct2013 Thu Oct 10 15:00:20 2013
10Oct2013-10Oct2013 Thu Oct 10 14:00:20 2013 The last report in list is deletedThe last report in list is deleted ?
-
Why don't you check overwrite report option and have on report per day updated every hour?
-
how do i do that ?
-
Sarg Schedules
-
It's a whole new setup
I just need to know what parameters I need write
For this to workI looked at the schedule
I did not see an example