Router on a Stick: 1WAN, 3LANs and NAT
-
Well, i have my pfsense loaded up with the vlans it needs. Everything is working just fine on the main LAN interface. However the OPT interfaces (VLANS) are not actually working correctly.
I have a computer that is on a different VLAN that can not communicate with the pfsense box. If i try and ping its vlan interface it will not respond. However, the pfsense can ping it. And i can ping through the router to the workstation from my machine on a different LAN.
I think this is a NAT issue, however i am not sure. NAT is functioning correctly on the main LAN interface and i am using it right now to be on the web posting. I have not had good luck finding information that is that relevant to my issue, and im a n00b.
Can anyone direct me? I was previously using SmoothWalls but ran into limitations on the number of interfaces i needed.
Thanks
-
do you have firewall rules in place that allow traffic from the subnet of your VLAN?
-
Yep! Thats it! I didn't realize (and i should have, im an idiot) that their is the implicit deny all. A simple permit all allowed traffic to flow.
Thanks for helping a n00b out!
