IpSet Nat Outbound does not work
-
Hello all,
Please Help me :'(. I need to communicate my internal network (192.168.1.0/24) with a partner network (10.1.1.0/24), but my partner has to receive packages only from 172.168.24.0/24 networks, because it already have 192.168.1.0 network configured.
I've setted Nat/BitNat with my internal network (192.168.1.0/24) and Local Network with 172.16.24.0/24 network. I also created Nat 1:1 and outbound, but there is no traffic through Vpn Tunnel. The vpn arrow is Up and there is no error in log list, but when I try to communicate with a 10.1.1.1 for example, my network traffic is redirected for wan interface.
Follows VPN configuration:
LocalSubnet: 172.16.24.0/24
NAT/Bitnat: 192.168.1.0/24Remote Subnet: 10.1.1.0/24
Does anyone can help me with this issue?
Obs: I'm sorry for my english. I'm not a native speaker.
-
Shouldn't you swap the localsubnet with the NAT subnet?
Your localsubnet stays 192.168.1.0/24. -
Hi Midnight_Shadow,
Thanks for Reply.
I succeed establish NAT before IPSec on Both sides without problem. :D
The problem was on my IPCOP on Site B. My firewall established connection on SonicWall using Nat Over Ipsec.
If anyone need more information, let me know.