Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Lock up at POST

    Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
    11 Posts 3 Posters 2.4k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S
      stephenw10 Netgate Administrator
      last edited by

      How locked up is it? Does the Num-Lock key work?

      When exactly does it lock? Do you see the PCI device information etc?

      It sounds suspiciously like you may have accidentally used an image that uses a serial console. Which image are you flashing to the usb stick exactly?

      Steve

      1 Reply Last reply Reply Quote 0
      • M
        mrhanman
        last edited by

        There is no response from the num lock key, or any other.  It locks up just after the RAM count during the time I would expect it would be detecting devices attached via PATA or SATA.  I've used several different images.  If I use one of the memstick images, it will boot, but when I install to the hard drive, the system won't boot until I've cleaned the HD on another PC.  I'm confident I'm not using a serial image.

        pfSense-1.2.3-RELEASE-LiveCD-Installer.iso - CD boots, but locks up after install to hard drive
        pfSense-2.1-RELEASE-4g-i386-nanobsd_vga.img - USB locks up PC
        pfSense-memstick-2.1-RELEASE-i386.img - USB boots, but locks up after install to hard drive

        Thanks for the help!

        1 Reply Last reply Reply Quote 0
        • stephenw10S
          stephenw10 Netgate Administrator
          last edited by

          Hmm, very odd. Hard to imagine what the pfSense installer could possibly do to the drive that would have any effect on the bios drive detection.  :-\ I'm not sure what to suggest really. Do you have another drive you could try? Though given that a USB stick with the Nano imagine written to it also fails…..

          Steve

          1 Reply Last reply Reply Quote 0
          • M
            mrhanman
            last edited by

            I'm pretty sure I tried another drive, but at this point I'm not positive.  What's really strange to me is that I installed Windows 7 on the same drive and it booted up and worked fine, so the installer has to be doing something different.

            1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              Indeed, very strange. What can the installer do to the drive that crashes the bios drive detection code?  :-\

              Have you tried setting the IDE channel to manual in the bios?

              Steve

              1 Reply Last reply Reply Quote 0
              • M
                mrhanman
                last edited by

                I'm not sure what you mean by setting the IDE channel to manual, but I did set SATA to legacy with no change.

                1 Reply Last reply Reply Quote 0
                • stephenw10S
                  stephenw10 Netgate Administrator
                  last edited by

                  Sorry too many threads open at once! I forgot you were using SATA.
                  I would definitely try any SATA detection options you have. Still can't see how the pfSense bootloader could possibly effect that.
                  Bootloader or SATA errors show themselves much further along the boot sequence.

                  Steve

                  1 Reply Last reply Reply Quote 0
                  • M
                    mrhanman
                    last edited by

                    I agree, which is what makes this so frustrating.  If I had another spare PC laying around, I would just forget about it and move on.  Unfortunately, that's not an option for me.

                    1 Reply Last reply Reply Quote 0
                    • C
                      charliem
                      last edited by

                      @mrhanman:

                      Does anyone have any ideas?  I finally have it running with a LiveCD and my config.xml on USB, but that just feels wrong.

                      Very strange you can get it running with a CD; it's almost certainly a hardware problem.  Get it running from a live CD (linux, pfSense, rescuecd, whatever), then get to a command prompt and look at the boot messages.  See if the disk and controller are detected.  If so, see if you can mount it and access it normally.

                      If you have been running running the live CD by disconnecting the boot hard drive, then go into the bios and change the boot order to CD first.  If the computer hangs with the drive plugged in, I'm 99% sure it's a hardware problem.  Try a new SATA cable, and also try both disks in another computer if possible.

                      Maybe your first problem was not a bad drive per se, but a failing controller?

                      Also might want to run memtest while you're at it (from one of those same CDs)

                      1 Reply Last reply Reply Quote 0
                      • C
                        charliem
                        last edited by

                        Hmm, google tells me your system has two SATA-150 HD controllers, but the CD is still an IDE connection, so it makes sense why a CD could work if the sata subsystem is failing or failed.

                        Try the drive in the other sata connection, otherwise dig through your junk pile for a IDE hard drive.

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.