Usando Wireless USB no pfsense
-
Pessoal,
Coloquei uma wireless usb modelo EW-7318USG (ralink) no pfsense.. ele reconhece.
#ugen1.2: <802.11 bg WLAN Ralink> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
rum0_wlan0: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500 ether 00:1f:1f:14:3e:b0 inet6 fe80::21f:1fff:fe14:3eb0%rum0_wlan0 prefixlen 64 scopeid 0xa inet 192.168.20.2 netmask 0xffffffff broadcast 192.168.20.2 nd6 options=3 <performnud,accept_rtadv>media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap> status: running ssid labexpert channel 2 (2417 MHz 11g) bssid 00:1f:1f:14:3e:b0 regdomain FCC country BR indoor authmode WPA2/802.11i privacy MIXED deftxkey 2 TKIP 2:128-bit TKIP 3:128-bit txpower 30 scanvalid 60 protmode CTS dtimperiod 1 -dfs</hostap></performnud,accept_rtadv></up,broadcast,running,promisc,simplex,multicast>
Só que esta dando uns erros.. eis
rum0: need multicast update callback rum0_wlan0: ieee80211_new_state_locked: pending RUN -> SCAN transition lost rum0: need multicast update callback rum0: need multicast update callback rum0_wlan0: ieee80211_new_state_locked: pending RUN -> SCAN transition lost
Não consegui identificar o que seria…
-
Voce está perdendo conexão nesta interface ou so esta vendo os alertas?