VNstat2 и PF 2.1 calendar problem

[bryan.paradis]

Please post the dates from:

1. running date at console
2. what date is listed on your pfsense
3. vnstat info show traffic for days
4. vnstat php front end

.png)
.png_thumb)

[DasTieRR]

1. running date at console                                    normal
2. what date is listed on your pfsense                  normal
3. vnstat info show traffic for days                        normal (current date at the end of the graph)
4. vnstat php front end                                        bad (minus 1 day)

[bryan.paradis]

1. ssh to pfsense & go to shell
2. cat /conf/config.xml | egrep -E '<timezone>(.*?)</timezone>'
3. does it display the right timezone?
4. cat /usr/local/etc/php.ini | grep date
5. does it display the same time zone?
6. if no edit /usr/local/etc/php.ini and set the right time zone.
7. if yes please post the results of the commands.

[DasTieRR]

@bryan.paradis:

1. ssh to pfsense & go to shell
2. cat /conf/config.xml | egrep -E '<timezone>(.*?)</timezone>'
3. does it display the right timezone?
4. cat /usr/local/etc/php.ini | grep date
5. does it display the same time zone?
6. if no edit /usr/local/etc/php.ini and set the right time zone.
7. if yes please post the results of the commands.

timezone 2) 4) ok :(

[bryan.paradis]

1. make a new file in /usr/local/www called phpinfo.php include below code
2. goto http://pfsense/phpinfo.php
3. check and paste the lines I pasted below

phpinfo();

?>

Configuration File (php.ini) Path /usr/local/etc
Loaded Configuration File /usr/local/etc/php.ini
Scan this dir for additional .ini files /usr/local/etc/php

date/time support enabled
"Olson" Timezone Database Version 2013.3
Timezone Database internal
Default timezone America/Montreal

Directive Local Value Master Value
date.default_latitude 31.7667 31.7667
date.default_longitude 35.2333 35.2333
date.sunrise_zenith 90.583333 90.583333
date.sunset_zenith 90.583333 90.583333
date.timezone America/Montreal America/Montreal

[DasTieRR]

@bryan.paradis:

1. make a new file in /usr/local/www called phpinfo.php include below code
2. goto http://pfsense/phpinfo.php
3. check and paste the lines I pasted below

phpinfo();

?>

Configuration File (php.ini) Path /usr/local/etc
Loaded Configuration File /usr/local/etc/php.ini
Scan this dir for additional .ini files /usr/local/etc/php

date/time support enabled
"Olson" Timezone Database Version 2013.3
Timezone Database internal
Default timezone America/Montreal

Directive Local Value Master Value
date.default_latitude 31.7667 31.7667
date.default_longitude 35.2333 35.2333
date.sunrise_zenith 90.583333 90.583333
date.sunset_zenith 90.583333 90.583333
date.timezone America/Montreal America/Montreal

Configuration File (php.ini) Path  /usr/local/etc
Loaded Configuration File  /usr/local/etc/php.ini

date/time support enabled
"Olson" Timezone Database Version 2013.3
Timezone Database internal
Default timezone Europe/Moscow

Directive Local Value Master Value
date.default_latitude 31.7667 31.7667
date.default_longitude 35.2333 35.2333
date.sunrise_zenith 90.583333 90.583333
date.sunset_zenith 90.583333 90.583333
date.timezone Europe/Moscow Europe/Moscow

[bryan.paradis]

1. Please upload a zip of your /usr/local/www/vnstat directory
2. Paste result of find / -name *vnstat*
3. Paste result of find / -name *re1*
4. Paste result of ls in /conf/vnstat
5. Backup your /conf/vnstat folder
6. Delete all files inside /conf/vnstat
7. Add the interfaces to vnstat one at a time: vnstat -u -i re1 then vnstat -u -i re2 then vnstat -u -i re3
8. Check php front end again to see if the date is fixed.

[DasTieRR]

@bryan.paradis:

1. Please upload a zip of your /usr/local/www/vnstat directory
2. Paste result of find / -name *vnstat*
3. Paste result of find / -name *re1*
4. Paste result of ls in /conf/vnstat
5. backup your /conf/vnstat folder
6. delete all files inside /conf/vnstat
7. add the interfaces to vnstat : vnstat -u -i re1 vnstat -u -i re2 vnstat -u -i re3
8. check php front end again to see if the date is fixed.

upload my file /usr/local/www/vnstat here?

7. vnstat : vnstat -u -i re1 vnstat -u -i re2 vnstat -u -i re3  -  command not found


[bryan.paradis]

@DasTieRR:

upload my file /usr/local/www/vnstat here?

Looks like there is a bit of a mess going on here

@DasTieRR:

7. vnstat : vnstat -u -i re1 vnstat -u -i re2 vnstat -u -i re3  -  command not found

I meant to use them one at a time for each interface

vnstat -u -i re1
vnstat -u -i re2
vnstat -u -i re3

[DasTieRR]

@bryan.paradis:

@DasTieRR:

@bryan.paradis:

1. Please upload a zip of your /usr/local/www/vnstat directory
2. Paste result of find / -name *vnstat*
3. Paste result of find / -name *re1*
4. Paste result of ls in /conf/vnstat
5. backup your /conf/vnstat folder
6. delete all files inside /conf/vnstat
7. add the interfaces to vnstat : vnstat -u -i re1 vnstat -u -i re2 vnstat -u -i re3
8. check php front end again to see if the date is fixed.

upload my file /usr/local/www/vnstat here?

7. vnstat : vnstat -u -i re1 vnstat -u -i re2 vnstat -u -i re3  -  command not found

I cleaned up my post. Please use the command one at a time. vnstat -u -i interfacename.

1. I cleared /cf/vnstat/ folder
2. I executed command, they are created new DB with normal date (today date), then i copied old vnstat data (re1 re2 re3 files) and it shows me old date 16 jan (again).
How can I can save my old vnstat data in new DataBase re1 re 2 re3?

[bryan.paradis]

@DasTieRR:

1. I cleared /cf/vnstat/ folder
2. I executed command, they are created new DB with normal date (today date), then i copied old vnstat data (re1 re2 re3 files) and it shows me old date 16 jan. How can I can save my old vnstat data?

This means that something has gone wrong with your old database. Did you change your server date sometime? Make a timezone change? Or something?

1. With new  database do vnstat –dumpdb -i re1 and vnstat --dumpdb -i .re1
2. With old database put back do vnstat --dumpdb -i re1 and vnstat --dumpdb -i .re1
3. Please zip .re1 & re1 files and attach to your post

[DasTieRR]

@bryan.paradis:

@DasTieRR:

1. I cleared /cf/vnstat/ folder
2. I executed command, they are created new DB with normal date (today date), then i copied old vnstat data (re1 re2 re3 files) and it shows me old date 16 jan. How can I can save my old vnstat data?

This means that something has gone wrong with your old database. Did you change your server date sometime? Make a timezone change? Or something?

1. With new  database do vnstat –dumpdb -i re1 and vnstat --dumpdb -i .re1
2. With old database put back do vnstat --dumpdb -i re1 and vnstat --dumpdb -i .re1

I do not remember, I changed timezone in old server - 2.0.x
then we bought new PC and i installed clean PF 2.1, imported some config (from backup/restore) but vnstat database I did not copy. But I have one server, whith clean install and clean configurations, whithout backups and restore and it have same problem.
Is there right command? They look same in first and second part.
I done first command:
vnstat –dumpdb -i re1 
then
vnstat --dumpdb -i .re1
then copied old base re1 and .re1 with ovewright files
then in cmd - vnstat --dumpdb -i re1  and vnstat --dumpdb -i .re1 and not see data from new base, only old data with 16 jan, and not 17 jan...

[bryan.paradis]

Please paste the results and zip the old .re1 and re1 files and upload them here http://www.sendspace.com/ and give me link

[DasTieRR]

@bryan.paradis:

Please paste the results and zip the old .re1 and re1 files and upload them here http://www.sendspace.com/ and give me link

http://www.sendspace.com/file/a95550

[bryan.paradis]

Please post your /etc/crontab

[DasTieRR]

@bryan.paradis:

Please post your /etc/crontab

SHELL=/bin/sh
PATH=/etc:/bin:/sbin:/usr/bin:/usr/sbin
HOME=/var/log
#minute hour    mday    month  wday    who      command

pfSense specific crontab entries

Created: January 17, 2014, 4:27 pm

0 * * * * root /usr/bin/nice -n20 newsyslog
1,31 0-5 * * * root /usr/bin/nice -n20 adjkerntz -a
1 3 1 * * root /usr/bin/nice -n20 /etc/rc.update_bogons.sh
*/60 * * * * root /usr/bin/nice -n20 /usr/local/sbin/expiretable -v -t 3600 sshlockout
1 1 * * * root /usr/bin/nice -n20 /etc/rc.dyndns.update
*/60 * * * * root /usr/bin/nice -n20 /usr/local/sbin/expiretable -v -t 3600 virusprot
30 12 * * * root /usr/bin/nice -n20 /etc/rc.update_urltables
0 0 * * * root /bin/rm /var/squid/cache/swap.state; /usr/pbi/squid-i386/sbin/squid -k rotate
*/15 * * * * root /usr/local/pkg/swapstate_check.php
*/1 * * * * root /usr/local/pkg/vnstat2.sh
*/1 * * * * root /root/tolog.sh
*/10 * * * * root /usr/bin/perl /usr/pbi/lightsquid-i386/www/lightsquid/lightparser.pl today
15 0 * * * root /usr/bin/perl /usr/pbi/lightsquid-i386/www/lightsquid/lightparser.pl yesterday
0 0 * * * root /usr/bin/nice -n20 /usr/pbi/squidguard-i386/etc/rc.d/squidGuard_logrotate

If possible do not add items to this file manually.

If you do so, this file must be terminated with a blank line (e.g. new line)

[bryan.paradis]

If you do vnstat -u are the dates correct?

[DasTieRR]

@bryan.paradis:

If you do vnstat -u are the dates correct?

In cmd? in cmd result of vnstat -u empty

[bryan.paradis]

@DasTieRR:

@bryan.paradis:

If you do vnstat -u are the dates correct?

In cmd? in cmd result of vnstat -u empty

Look at php front end dates now. does it say 17th

[DasTieRR]

@bryan.paradis:

@DasTieRR:

@bryan.paradis:

If you do vnstat -u are the dates correct?

In cmd? in cmd result of vnstat -u empty

Look at php front end dates now. does it say 17th

Yes, but in Moscow 18 jan…