Fxp0 timed out during installation
-
Hi,
i was building a new system for pfsense with a mini itx board and an 3x Intel 82541PI GigaLAN extension module.
Now my problem:
During installation of pfsense (after selecting 1 for deault boot) i geht this message:
fxp0: fxp_minibus_readreg: timed out fxp0: fxp_minibus_readreg: timed out fxp0: fxp_minibus_readreg: timed out fxp0: fxp_minibus_readreg: timed out fxp0: fxp_minibus_readreg: timed out fxp0: fxp_minibus_readreg: timed out fxp0: fxp_minibus_readreg: timed out fxp0: fxp_minibus_readreg: timed out fxp0: fxp_minibus_readreg: timed out fxp0: fxp_minibus_readreg: timed out fxp0: fxp_minibus_readreg: timed out fxp0: fxp_minibus_readreg: timed out fxp0: fxp_minibus_readreg: timed out fxp0: fxp_minibus_readreg: timed out minibus0: <mii bus="">on fxp0 fxp0: fxp_minibus_readreg: timed out fxp0: fxp_minibus_readreg: timed out ukphy0: <generic ieee="" 802.3u="" media="" interface="">PHY 0 on minibus0 fxp0: fxp_minibus_writereg: timed out fxp0: fxp_minibus_readreg: timed out fxp0: fxp_minibus_readreg: timed out fxp0: fxp_minibus_readreg: timed out fxp0: fxp_minibus_readreg: timed out ukphy0: no media present ifmedia_set: no match for 0x0/0xfffffff panic: ifmedia_set cpuid = 0 KDB: enter: panic thread pid 0 tid 100000 Stopped at kdb_enter+0x3b: movq $0,0xc06cb2(%rip) db></generic></mii>
and then noting. Hardware is an Intel 82541PI GigaLAN with 3 Gbit Ports on it.
Any ideas ? found nothing here or with google.
Thanks!
-
fxp is an Intel 10/100 NIC. What hardware are you using?
Steve