Pfsense on Dell PowerEdge r720 Issue??

zerokool

im glad I read this.

im running dell 1950 with 2 builtin Broadcom nics. and 8 addtl' Bcom nics.

stephenw10

@zerokool
Yep, you should definitely apply those tweaks. Also your 'stuck at 36%' issue is common on Dell hardware as I said.

@zohaib
What media are you installing onto? That error looks like it can't read the config file for some reason. Bad disk perhaps or unsupported disk controller or controller mode.

Steve

zohaib

thanks for ur response,

@stephenw10

i am istalling on 500GB, SATA, 3.5in, 7.2K RPM Hard Drive
installation didnt stuck at 36% successfully install but after installation i get this warning

ls: *.xml: No such file or directory
Config.xml is corrupted and is 0 bytes. Could not restore a previous backup.

and assign interface option not working.. i can go to shell

zohaib

zerokool , can you share your experience to solve this issue, and can you elaborate more which RAID controller or no RAID you are using.

stephenw10

You might try a 4GB partition for root. Though your error looks different. 500GB is far larger than you need, if you have a smaller one try that.
See: https://doc.pfsense.org/index.php/Boot_Troubleshooting

What disk controller are you using?

Steve

zohaib

I am using SATA (Serial ATA).
i also install on RAID 1, i have PERC H310 Integrated RAID Controller.

stephenw10

So perhaps your raid controller isn't recognised correctly. Have you tried not using raid 1?

Steve

stephenw10

See mine and JimPs replies in this thread:
https://forum.pfsense.org/index.php/topic,71941.0.html
Some users have reported that eventually it will install if you wait long enough. ::) It's not something I've ever encountered personally.

Steve

zohaib

Steve

Successfully installed pfSense without RAID 1 but same issue warning on option top

ls: *.xml: No such file or directory
Config.xml is corrupted and is 0 bytes. Could not restore a previous backup.

stephenw10

Presumably you aren't trying to restore a config file? Do you have something connected that pfSense might be looking for a restorable file on, like a USB memory stick?
Is this error actually causing a problem? Can you make changes to the config and save them?

Steve

zohaib

No nothing is attached,

yes this Problem is main issue i cant do anything except option 8: Shell.
I cant Assign Interfaces, Set Interfaces IP, no configuration nothing.

heper

does the r720 have an sdcard slot on the motherboard? if yes => try removing the sdcard if one is in there

stephenw10

Hmm, odd that it's not reading the config file but is able to install. Just to be sure you are installing not running from the live DVD?
If you have console access can you check the dmesg for any other errors? In the config.xml file there in /conf/?
Do you have a /conf.default folder? Try copyign the config.xml from there to /conf.

This is not something I've run into otherwise I'd probably be more help. It has happened before though (search the forum) so one of the devs will probably have a solution.

Steve

zohaib

@heper

No sdcard slot on the motherboard and nothing is attached.

zohaib

@stephenw10

pfSense is installed on HardDisk not running from Live DVD.

rezaur

@zohaib where you able to resolve the issue? Having the same problem.