Unbound TCP buffer settings not sticky

wagonza

Fixed. Reinstall :/

doktornotor

@wagonza:

Reinstall :/

Hehe, I'll cron an hourly reinstall I guess. :D

Fixed, thanks again! 8)

wagonza

@doktornotor:

Hehe, I'll cron an hourly reinstall I guess. :D

Ha! Cool thanks for the feedback.

markn62

Upgraded the service watchdog package fine. Then went onto the unbound upgrade and it failed. Now I get "Unable to retrieve package info from www.pfsense.com. Cached data will be used" which doesn't get me anywhere.

markn62

First attempt at a package upgrade failed. Had to reboot pfsense then the unbound version 1.4.21_3 package would install. Go figure.

In the GUI I changed both "incoming TCP buffers" and "outgoing TCP buffers" from 10 to zero and /usr/pbi/unbound-amd64/etc/unbound/unbound.conf reports;

outgoing-num-tcp: 10
incoming-num-tcp: 10

So no change that I can see.

wagonza

Thanks for the feedback. Found the problem and fixed.

markn62

When do you plan to release the fix?

wagonza

Its released so you just need to reinstall the package. I didnt bump the version.

markn62

Ahhh, didn't know I could PKG from the "installed packages" tab. I'll report back by tomorrow.

shinzo

After installing unbound 1.4.21_3 none of the custom options i am using seem to work anymore. The error is

php: config.inc: The command '/usr/pbi/unbound-amd64/sbin/unbound-control start' returned exit code '1', the output was '/usr/pbi/unbound-amd64/etc/unbound/unbound.conf:104: error: syntax error read /usr/pbi/unbound-amd64/etc/unbound/unbound.conf failed: 1 errors in configuration file [1393437916] unbound[79295:0] fatal error: Could not read config file: /usr/pbi/unbound-amd64/etc/unbound/unbound.conf'

When i went into the file it starts on the first line of the custom options, if i remove all the options i have it will boot fine.

"msg-cache-slabs: 1;rrset-cache-slabs: 1;infra-cache-slabs: 1;key-cache-slabs: 1;outgoing-range: 950;val-clean-additional: yes;harden-glue: yes;do-not-query-localhost: yes;do-ip6: no;use-caps-for-id: no;hide-identity: yes;hide-version: yes"

the custom options i was using. I even tried using them one at a time and it still give me the errors.

bryan.paradis

@shinzo:

After installing unbound 1.4.21_3 none of the custom options i am using seem to work anymore. The error is

php: config.inc: The command '/usr/pbi/unbound-amd64/sbin/unbound-control start' returned exit code '1', the output was '/usr/pbi/unbound-amd64/etc/unbound/unbound.conf:104: error: syntax error read /usr/pbi/unbound-amd64/etc/unbound/unbound.conf failed: 1 errors in configuration file [1393437916] unbound[79295:0] fatal error: Could not read config file: /usr/pbi/unbound-amd64/etc/unbound/unbound.conf'

When i went into the file it starts on the first line of the custom options, if i remove all the options i have it will boot fine.

"msg-cache-slabs: 1;rrset-cache-slabs: 1;infra-cache-slabs: 1;key-cache-slabs: 1;outgoing-range: 950;val-clean-additional: yes;harden-glue: yes;do-not-query-localhost: yes;do-ip6: no;use-caps-for-id: no;hide-identity: yes;hide-version: yes"

the custom options i was using. I even tried using them one at a time and it still give me the errors.

The options in the configuration file should be like below


option: blah
option: blah
option: blah

the gui should take the custom options then split them by the delimiter ; then it puts them on a new line for each option

	# Handle custom options
	if (!empty($adv_config['custom_options'])) {
		$custom_options = explode(";", ($adv_config['custom_options']));
		$unbound_conf .= "\n# Unbound Custom options\n";
		foreach ($custom_options as $ent)
			$unbound_conf .= $ent."\n";

Is that the line you see exactly in your config file? What are you putting in the advanced options form in the gui?

shinzo

@bryan.paradis:

@shinzo:

After installing unbound 1.4.21_3 none of the custom options i am using seem to work anymore. The error is

php: config.inc: The command '/usr/pbi/unbound-amd64/sbin/unbound-control start' returned exit code '1', the output was '/usr/pbi/unbound-amd64/etc/unbound/unbound.conf:104: error: syntax error read /usr/pbi/unbound-amd64/etc/unbound/unbound.conf failed: 1 errors in configuration file [1393437916] unbound[79295:0] fatal error: Could not read config file: /usr/pbi/unbound-amd64/etc/unbound/unbound.conf'

When i went into the file it starts on the first line of the custom options, if i remove all the options i have it will boot fine.

"msg-cache-slabs: 1;rrset-cache-slabs: 1;infra-cache-slabs: 1;key-cache-slabs: 1;outgoing-range: 950;val-clean-additional: yes;harden-glue: yes;do-not-query-localhost: yes;do-ip6: no;use-caps-for-id: no;hide-identity: yes;hide-version: yes"

the custom options i was using. I even tried using them one at a time and it still give me the errors.

The options in the configuration file should be like below
option: blah
option: blah
option: blah
the gui should take the custom options then split them by the delimiter ; then it puts them on a new line for each option
	# Handle custom options
	if (!empty($adv_config['custom_options'])) {
		$custom_options = explode(";", ($adv_config['custom_options']));
		$unbound_conf .= "\n# Unbound Custom options\n";
		foreach ($custom_options as $ent)
			$unbound_conf .= $ent."\n";
Is that the line you see exactly in your config file? What are you putting in the advanced options form in the gui?

I looked over the code and it is the same. In the advanced options in the gui i have

"msg-cache-slabs: 1;rrset-cache-slabs: 1;infra-cache-slabs: 1;key-cache-slabs: 1;outgoing-range: 950;val-clean-additional: yes;harden-glue: yes;do-not-query-localhost: yes;do-ip6: no;use-caps-for-id: no;hide-identity: yes;hide-version: yes" as the semi colon is used to make a new line.

when i go into the config file, it is being set correctly.

Unbound Custom options

msg-cache-slabs: 1
rrset-cache-slabs: 1
infra-cache-slabs: 1
key-cache-slabs: 1
outgoing-range: 950
val-clean-additional: yes
harden-glue: yes
do-not-query-localhost: yes
do-ip6: no
use-caps-for-id: no
hide-identity: yes
hide-version: yes

markn62

@Shinzo,
What version package were you running prior? I can tell you outgoing-range as a custom setting, along with a few select others, has never worked in 2.0 or 2.1, see my post @ https://forum.pfsense.org/index.php/topic,64897.msg352131.html#msg352131 . I had to strip my custom options down to only forward zone and addresses. No way to detune unbound. So you cant really troubleshoot the package by probable trial'n'error if it acts quirky. Unbound reboots by itself a few times a day on my 64-bit install. And I've never read anywhere until today that the word "option:" needs to be placed before every custom option entry if I read this thread correctly. Where is this documented? I don't use them in my options and the ones I have entered show in the unbound.conf fine. Can't say if, for example, "option: outgoing-range: 950" would be accepted by unbound but imagine it would get hung up on the pair of colon syntax, although I haven't tried it.

shinzo

@markn62:

@Shinzo,
What version package were you running prior? I can tell you outgoing-range as a custom setting, along with a few select others, has never worked in 2.0 or 2.1, see my post @ https://forum.pfsense.org/index.php/topic,64897.msg352131.html#msg352131 . I had to strip my custom options down to only forward zone and addresses. No way to detune unbound. So you cant really troubleshoot the package by probable trial'n'error if it acts quirky. Unbound reboots by itself a few times a day on my 64-bit install. And I've never read anywhere until today that the word "option:" needs to be placed before every custom option entry if I read this thread correctly. Where is this documented? I don't use them in my options and the ones I have entered show in the unbound.conf fine. Can't say if, for example, "option: outgoing-range: 950" would be accepted by unbound but imagine it would get hung up on the pair of colon syntax, although I haven't tried it.

The "option: blah" was used as a example of how the output should be. As i continue to troubleshoot my issue, i removed the 4 previous lines which had to do with the forward-zones and got it up and running, il keep looking

oh and i was using version 1.4.21_2 and it was on a 2.1.1 box

bryan.paradis

FILE FORMAT
There must be whitespace between keywords. Attribute keywords end with
a colon ':'. An attribute is followed by its containing attributes, or
a value.

Files can be included using the include: directive. It can appear any-
where, it accepts a single file name as argument. Processing continues
as if the text from the included file was copied into the config file
at that point. If also using chroot, using full path names for the
included files works, relative pathnames for the included names work if
the directory where the daemon is started equals its chroot/working
directory. Wildcards can be used to include multiple files, see
glob(7).

Server Options
These options are part of the server: clause.

Looks like the configuration file should be laid out in clause sections full of options as below:


server:
option: blah

remote-control:
option: blah

stub-zone:
option: blah

forward-zone:
option: blah

but it seems that the custom server options are being added after the forward-zone clause. I have moved the code in the unbound.inc file up above the foward-zone code and attached it. Try backing up the unbound.inc and placing the one I have attached in its place.

unbound.inc.txt

shinzo

#########################

Unbound configuration

#########################

Server config

server:
chroot: ""
username: "unbound"
directory: "/usr/pbi/unbound-amd64/etc/unbound"
pidfile: "/var/run/unbound.pid"
harden-referral-path: no
prefetch: no
prefetch-key: no
use-syslog: yes
port: 53
verbosity: 0
do-ip4: yes
do-ip6: yes
do-udp: yes
do-tcp: yes
do-daemonize: yes
module-config: "validator iterator"
unwanted-reply-threshold: 5000000
num-queries-per-thread: 512
jostle-timeout: 200
infra-host-ttl: 900
prefetch: no
prefetch-key: no
infra-cache-numhosts: 15000
outgoing-num-tcp: 10
incoming-num-tcp: 10
edns-buffer-size: 4096
statistics-interval: 0
extended-statistics: no
statistics-cumulative: no
cache-max-ttl: 86400
cache-min-ttl: 0
harden-dnssec-stripped: yes
hide-identity: yes
hide-version: yes
harden-glue: yes
num-threads: 4
msg-cache-slabs: 4
rrset-cache-slabs: 4
infra-cache-slabs: 4
key-cache-slabs: 4
msg-cache-size: 10m
rrset-cache-size: 20m
outgoing-range: 8192
#so-rcvbuf: 4m
#so-sndbuf: 4m

Interface IP(s) to bind to

interface: 192.168.1.1

Interfaces to query from

outgoing-interface: 192.168.1.1

auto-trust-anchor-file: /usr/pbi/unbound-amd64/etc/unbound/root-trust-anchor

Access Control

Local attached networks allowed to utilize service and any user added ACLs

access-control: 127.0.0.0/8 allow
access-control: ::1 allow
access-control: 192.168.1.0/27 allow

For DNS Rebinding prevention

private-address: 10.0.0.0/8
private-address: 172.16.0.0/12
private-address: 192.168.0.0/16
private-address: 169.254.0.0/16
private-address: fd00::/8
private-address: fe80::/10

Set private domains in case authorative name server returns a RFC1918 IP address

Host entries

local-zone: "lan" transparent
local-data-ptr: "127.0.0.1 localhost"
local-data: "localhost A 127.0.0.1"
local-data: "localhost.lan A 127.0.0.1"
local-data-ptr: "::1 localhost"
local-data: "localhost AAAA ::1"
local-data: "localhost.lan AAAA ::1"
local-data-ptr: "192.168.1.1 peanuts.lan"
local-data: "peanuts.lan A 192.168.1.1"
local-data: "peanuts A 192.168.1.1"

DHCP Reservations

/etc/hosts entries

Domain overrides

#forward-zone:
#name: "."
#forward-addr: 75.75.75.75
#forward-addr: 75.75.76.76

Unbound Custom options

msg-cache-slabs: 1
rrset-cache-slabs: 1
infra-cache-slabs: 1
key-cache-slabs: 1
outgoing-range: 950
val-clean-additional: yes
harden-glue: yes
do-not-query-localhost: yes
do-ip6: no
use-caps-for-id: no
hide-identity: yes
hide-version: yes

Remote Control Config

remote-control:
control-enable: yes
control-interface: 127.0.0.1
control-port: 953
server-key-file: "/usr/pbi/unbound-amd64/etc/unbound/unbound_server.key"
server-cert-file: "/usr/pbi/unbound-amd64/etc/unbound/unbound_server.pem"
control-key-file: "/usr/pbi/unbound-amd64/etc/unbound/unbound_control.key"
control-cert-file: "/usr/pbi/unbound-amd64/etc/unbound/unbound_control.pem"

thats how my file looks like when its working. Some of those options are doubled because they weren't there before or i didn't want to manually change the values every time the package was updated. If i put them in the custom options window, then it will overwrite the default value to what ever i wanted since the custom options are read last

thats the output in the status tab when its running. or do you want the config file?

bryan.paradis

@shinzo:

#########################

Unbound configuration

#########################

snip

thats how my file looks like when its working. Some of those options are doubled because they weren't there before or i didn't want to manually change the values every time the package was updated. If i put them in the custom options window, then it will overwrite the default value to what ever i wanted since the custom options are read last

Check my update attachement. I think it is because the custom options are getting put in after the server: clause has been finished because the forward-zones clause has started. Can you test it out to see if it works properly with my changes?

shinzo

sure just need a minute

shinzo

@bryan.paradis:

@shinzo:

#########################

Unbound configuration

#########################

snip

thats how my file looks like when its working. Some of those options are doubled because they weren't there before or i didn't want to manually change the values every time the package was updated. If i put them in the custom options window, then it will overwrite the default value to what ever i wanted since the custom options are read last

Check my update attachement. I think it is because the custom options are getting put in after the server: clause has been finished because the forward-zones clause has started. Can you test it out to see if it works properly with my changes?

yeah that did fix it.

it looks like

Unbound Custom options

msg-cache-slabs: 1
rrset-cache-slabs: 1
infra-cache-slabs: 1
key-cache-slabs: 1
val-clean-additional: yes
harden-glue: yes
do-not-query-localhost: yes
do-ip6: no
use-caps-for-id: no
hide-identity: yes
hide-version: yes
forward-zone:
name: "."
forward-addr: 75.75.75.75
forward-addr: 75.75.76.76

bryan.paradis

So all the options work correctly now?