Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    No IP address displayed

    Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
    93 Posts 4 Posters 19.9k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S
      stephenw10 Netgate Administrator
      last edited by

      @satimis:

      pfSense (see attached image)

      Adapter-1
      Bridge
      eth0
      Adapter-2
      Bridge
      eth1

      That's the pfSense VM?
      The pfSense LAN interface must be type 'internal' in VBox. Otherwise it can't connect to the other VMs in PC1 which are also using the internal network.

      @satimis:

      VM PC1
      satimis@ub12043dk00:~$ sudo ifconfig```

      eth0      Link encap:Ethernet  HWaddr 08:00:27:10:8c:3d 
                inet addr:192.168.1.100  Bcast:192.168.1.255  Mask:255.255.255.0
                inet6 addr: fe80::a00:27ff:fe10:8c3d/64 Scope:Link
                UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
                RX packets:28 errors:0 dropped:0 overruns:0 frame:0
                TX packets:275 errors:0 dropped:0 overruns:0 carrier:0
                collisions:0 txqueuelen:1000
                RX bytes:2680 (2.6 KB)  TX bytes:57037 (57.0 KB)

      How is that IP being set in the Ubuntu VM? It should be set to DHCP and receiving its address from pfSense.

      @satimis:

      Adapter-1
      Bridge
      eth0
      Adapter-2
      Bridge
      eth1
      Adapter-3
      Host-only Adapter

      Which VM is that?

      @satimis:

      During booting pfSense following warning displayed```

      ..
      Starting NTP time client .. . Error : Error : hostname nor servname provided, or not known
      Error : hostname nor servname provided, or not known
      ..

      It held there for long time.  How to fix it?

      That happens if pfSense is unable to connect to an external NTP server to update its time. Not a good sign.

      @satimis:

      Can I create another network?  If YES, pls advise HOW?  Thanks

      Yes you could create another interface in pfSense to connect the PC2 host. That will then have a different subnet and could have a different set of firewall rules. You can filter any traffic between PC1 VMs and PC2 VMs.

      Steve

      1 Reply Last reply Reply Quote 0
      • S
        satimis
        last edited by

        Hi Steve,

        Just discovered that pfSense has no function after Host (PC1) connected ISP running pppoe.

        PC1 VM (Ubuntu)
        Adapter
        NAT

        pfSense NOT running

        ~$ sudo ifconfig```

        [sudo] password for satimis:
        eth0      Link encap:Ethernet  HWaddr 08:00:27:10:8c:3d 
                  inet addr:10.0.2.15  Bcast:10.0.2.255  Mask:255.255.255.0
                  inet6 addr: fe80::a00:27ff:fe10:8c3d/64 Scope:Link
                  UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
                  RX packets:119229 errors:0 dropped:0 overruns:0 frame:0
                  TX packets:66072 errors:0 dropped:0 overruns:0 carrier:0
                  collisions:0 txqueuelen:1000
                  RX bytes:97656834 (97.6 MB)  TX bytes:5485570 (5.4 MB)

        lo        Link encap:Local Loopback 
                  inet addr:127.0.0.1  Mask:255.0.0.0
                  inet6 addr: ::1/128 Scope:Host
                  UP LOOPBACK RUNNING  MTU:65536  Metric:1
                  RX packets:1018 errors:0 dropped:0 overruns:0 frame:0
                  TX packets:1018 errors:0 dropped:0 overruns:0 carrier:0
                  collisions:0 txqueuelen:0
                  RX bytes:190128 (190.1 KB)  TX bytes:190128 (190.1 KB)

        
PC2 unable to connect Internet

ifconfig```

....
inet addr: 192.168.1.103  Bcast:192.168.1.255  Mask:255.255.255.0
....

        @stephenw10:

        @satimis:

        pfSense (see attached image)

        Adapter-1
        Bridge
        eth0
        Adapter-2
        Bridge
        eth1

        That's the pfSense VM?

        Yes

        The pfSense LAN interface must be type 'internal' in VBox. Otherwise it can't connect to the other VMs in PC1 which are also using the internal network.

        Tried.

        Adapter-1
        internal
        Adapter-2
        Bridge
        eth1 (also tried eth0)

        PC1 VM (if Adapter 1 set to Bridge) and PC2 Host unable to connect Internet. 
        If Adapter set to NAT, VM gets connection via the Host

        How is that IP being set in the Ubuntu VM? It should be set to DHCP and receiving its address from pfSense.

        If PC1 VM

        Adapter 1
        NAT

        VM gets connection on Host not pfSense.

        @satimis:

        Adapter-1
        Bridge
        eth0
        Adapter-2
        Bridge
        eth1
        Adapter-3
        Host-only Adapter

        Which VM is that?

        Not VM.  pfSense

        @satimis:

        During booting pfSense following warning displayed```

        ..
        Starting NTP time client .. . Error : Error : hostname nor servname provided, or not known
        Error : hostname nor servname provided, or not known
        ..

        It held there for long time.  How to fix it?

        That happens if pfSense is unable to connect to an external NTP server to update its time. Not a good sign.

        I have tried googling a while with a solution to me.  The solution found relating to BSD.  I import pfSense.ova on their server.  However I didn't find this problem on following physical network connect:
        ISP -> Cable Modem -> Router - PC

        @satimis:

        Can I create another network?  If YES, pls advise HOW?  Thanks

        Yes you could create another interface in pfSense to connect the PC2 host. That will then have a different subnet and could have a different set of firewall rules. You can filter any traffic between PC1 VMs and PC2 VMs.

        Is it adding another Adapter say Adapter 3 on pfSense?

        I'll come back to this question later after sorting out my recent problem.

        Rgds
        satimis

        1 Reply Last reply Reply Quote 0
        • stephenw10S
          stephenw10 Netgate Administrator
          last edited by

          Ok, I think we have a bit of a miscommunication problem here. A diagram would probably go a long way to help that. I'll try to draw something up this afternoon.

          I can well believe that the pfSense VM has a problem if you are using PPPoE directly from its host PC. Why are you doing PPPoE from PC1? The PPPoE session should be in the pfSense WAN interface.

          What happens when you try to start pfSense?

          You should forget PC2 until you have pfSense running correctly with PC1 and the VMs hosted by PC1. Then add PC2.

          If you have any adapters set to type 'NAT' in VBox then you will be bypassing pfSense. All the NAT should be done by pfSense.

          pfSense is being run inside a VM like any of the other OSes, they are all just VMs to Vbox.

          Steve

          1 Reply Last reply Reply Quote 0
          • S
            satimis
            last edited by

            @stephenw10:

            Ok, I think we have a bit of a miscommunication problem here. A diagram would probably go a long way to help that. I'll try to draw something up this afternoon.

            Thanks

            I can well believe that the pfSense VM has a problem if you are using PPPoE directly from its host PC. Why are you doing PPPoE from PC1? The PPPoE session should be in the pfSense WAN interface.

            I'll use another ISP on the coming early April.  The new ISP shall not provide router but an ONT for connecting my PC.  The new service will be FTTH Fibre Optic Service, 100MB/100MB..  Therefore I have to provide a router for collecting 2 PCs.  PC1 is my daily working PC with 10 VMs running.  PC2 is a spare PC also with 10 VMs running.  The latter is NOT running round the clock.  If I succeed installing/running pfSense as router on PC1 then I don't need purchasing a router.  I just plug a Cat5e cable to NIC2 of PC1 and to NIC of PC2 when I use the latter.

            What happens when you try to start pfSense?

            Nothing special found.  I can't use it as router to routing Internet connection to VM of PC1.  I haven't tested the VM on PC2.  What I noticed was I can start the login page of pfSense on browser of PC2 but unable to login.

            You should forget PC2 until you have pfSense running correctly with PC1 and the VMs hosted by PC1. Then add PC2.

            OK

            If you have any adapters set to type 'NAT' in VBox then you will be bypassing pfSense. All the NAT should be done by pfSense.

            pfSense is being run inside a VM like any of the other OSes, they are all just VMs to Vbox.

            Noted.  Thanks

            Rgds
            satimis

            1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              Right rather than my usual 'WordCad' effort I thought I'd give gliffy a try. Think I need more practise!  ::)
              Anyway here's the diagram. I didn't put any IPs or subnets on there since that's up to you really.
              I hope you can understand it.

              Steve

              vbox_suggested_setup.jpg
              vbox_suggested_setup.jpg_thumb

              1 Reply Last reply Reply Quote 0
              • S
                satimis
                last edited by

                @stephenw10:

                Right rather than my usual 'WordCad' effort I thought I'd give gliffy a try. Think I need more practise!  ::)
                Anyway here's the diagram. I didn't put any IPs or subnets on there since that's up to you really.
                I hope you can understand it.

                Hi,

                Thanks for your diagram.

                Performed following steps but without result.

                Started pfSense```

                ........
                Configuring WAN interface ......
                (holding here for a long time but finally done)
                Configuring WAN interface done
                .....

                
Also holding here for long time```

....
Starting NTP time client .. . Error : Error : hostname nor servname provided, or not known
Error : hostname nor servname provided, or not known
....

                WAN (wan)  -> em1  -> NONE (DHCP)
                LAN (lan  -> em0  -> 192.168.1.1

                VM Ubuntu 12.04 desktop

                Network -> Adapter 1
                Bridged Adapter
                eth1 (not eth0)

                It can ping 192.168.1.1 but unable to ping yahoo.com

                Also on browser I can login pfSense

                $ sudo ifconfig```

                eth0      Link encap:Ethernet  HWaddr 08:00:27:10:8c:3d 
                          inet addr:192.168.1.100  Bcast:192.168.1.255  Mask:255.255.255.0
                          inet6 addr: fe80::a00:27ff:fe10:8c3d/64 Scope:Link
                          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
                          RX packets:48 errors:0 dropped:0 overruns:0 frame:0
                          TX packets:102 errors:0 dropped:0 overruns:0 carrier:0
                          collisions:0 txqueuelen:1000
                          RX bytes:4344 (4.3 KB)  TX bytes:13633 (13.6 KB)

                lo        Link encap:Local Loopback 
                          inet addr:127.0.0.1  Mask:255.0.0.0
                          inet6 addr: ::1/128 Scope:Host
                          UP LOOPBACK RUNNING  MTU:65536  Metric:1
                          RX packets:84 errors:0 dropped:0 overruns:0 frame:0
                          TX packets:84 errors:0 dropped:0 overruns:0 carrier:0
                          collisions:0 txqueuelen:0
                          RX bytes:5660 (5.6 KB)  TX bytes:5660 (5.6 KB)

                
According to following article:
Virtualize your router using pfSense and Virtualbox
http://www.area536.com/projects/virtualize-your-router-using-pfsense-and-virtualbox/

I further performed following steps:

Host
====
$ sudo ifconfig```

eth0      Link encap:Ethernet  HWaddr 00:26:18:44:b6:1a  
          inet6 addr: fe80::226:18ff:fe44:b61a/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1229 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1627 errors:0 dropped:0 overruns:0 carrier:1
          collisions:0 txqueuelen:1000 
          RX bytes:883218 (862.5 KiB)  TX bytes:324344 (316.7 KiB)
          Interrupt:18 

eth1      Link encap:Ethernet  HWaddr 90:f6:52:03:57:86  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:43 Base address:0x4000
....
....

                eth0   HWaddr 00:26:18:44:b6:1a
                MAC  00261844b61a

                eth1      Link encap:Ethernet  HWaddr 90:f6:52:03:57:86
                MAC 90f652035786

                Tried changing following MAC Address on both eth0 and eth1

                MAC  00261844b61a/00261844B61A
                    90f652035786/90F652035786

                Still the same pfSense can't connect ISP

                A side question, how to draw your diagram?

                Rgds
                satimis

                1 Reply Last reply Reply Quote 0
                • stephenw10S
                  stephenw10 Netgate Administrator
                  last edited by

                  @satimis:

                  
........
Configuring WAN interface ......
(holding here for a long time but finally done)
Configuring WAN interface done
.....

                  Also holding here for long time```

                  ....
                  Starting NTP time client .. . Error : Error : hostname nor servname provided, or not known
                  Error : hostname nor servname provided, or not known
                  ....

                  That's expected behaviour as it tries to obtain an IP address via DHCP (and fails) and then tries to get the time from an NTP server (and fails).

                  @satimis:

                  WAN (wan)  -> em1  -> NONE (DHCP)
                  LAN (lan  -> em0  -> 192.168.1.1

                  Ok, so which adapter is which? Is the router still in it's standard mode, handing out IP address on it's LAN? If so then probably have the interfaces the wrong way around. This worked earlier. You set the interface that is assigned to the pfSense WAN to 'bridged interface' and pfSense recived an IP on its WAN from the router. It was em1 there too though so perahps you have changed the WAN adapter to 'internal' in VBox instead of the LAN.

                  @satimis:

                  VM Ubuntu 12.04 desktop

                  Network -> Adapter 1
                  Bridged Adapter
                  eth1 (not eth0)

                  It can ping 192.168.1.1 but unable to ping yahoo.com
                  Also on browser I can login pfSense

                  The Ubuntu VM that we are using to configure pfSense should have only one adapter enabled on it and it should be type 'Internal'. It is shown as any of the VMs I have on PC1 in my diagram. It should be set to use DHCP in Ubuntu so that you can see when it is correctly receiving an IP from pfSense.

                  It seems likely that you have accidentally set the pfSense VM WAN adapter to internal and the LAN adapter to bridged. In that instance the pfSense LAN would be accessible via a bridged adapter on the Ubuntu VM because they are both bridged to the same physical NIC in the host.

                  If that is the case you need rectify this by either reassigning the interfaces in pfSense, WAN as em0 and LAN as em1, OR change the adapter types in VBox so the the correct adapters are bridged and internal.

                  Forget about MAC addresses for now. You may have to spoof the WAN MAC address in pfSense if your ISP requires that

                  @satimis:

                  A side question, how to draw your diagram?

                  I used giffly.com gliffy.com. The first time I used it hence the colours are at bit odd. Haven't worked out how to change that yet.  ::)

                  1 Reply Last reply Reply Quote 0
                  • S
                    satimis
                    last edited by

                    Hi Steve,

                    pfSense was imported on "pfSense-2.0.3-RELEASE-amd64.ova" download on pfSense website.

                    Remark:
                    I'm confused here.  Physical NIC-1 (eth0) is onboard (motherboard) and physical NIC-2 (eth1) is a PCI-e Gigabit NIC.  On host they are displayed correctly.  However on pfSense and VM NIC-1 becomes eth1 and NIC-2 eth0

                    Changed eth0 and eth1 back to their original MAC Addresses.  Started pfSense

                    Adapter 1
                    Attached to: Bridge
                    eth0

                    Adapter 2
                    Attached to: Bridge
                    eth1

                    VM 12.04 Desktop

                    Adapter 1
                    Attached to: Internal Network
                    Name: intnet

                    $ sudo ifconfig

                    
eth0      Link encap:Ethernet  HWaddr 08:00:27:10:8c:3d  
          inet6 addr: fe80::a00:27ff:fe10:8c3d/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:12394 (12.3 KB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:16 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:1312 (1.3 KB)  TX bytes:1312 (1.3 KB)

                    $ ping 192.168.1.1
                    connect: Network is unreachable

                    I think my problem is pfSense can't establish a second connection to ISP via the virtual NIC.  Because Host is already connected to ISP.  Seemly second connection is NOT allowed unless behind a physical router.

                    Other advice noted with thanks.

                    satimis

                    1 Reply Last reply Reply Quote 0
                    • stephenw10S
                      stephenw10 Netgate Administrator
                      last edited by

                      The pfSense VM needs to have :

                      Adapter 2
                      Attached to: Internal Network
                      Name: intnet

                      That is the adapter that is then set as the pfSense LAN interface.

                      Steve

                      1 Reply Last reply Reply Quote 0
                      • S
                        satimis
                        last edited by

                        @stephenw10:

                        The pfSense VM needs to have :

                        Adapter 2
                        Attached to: Internal Network
                        Name: intnet

                        That is the adapter that is then set as the pfSense LAN interface.

                        Steve

                        Performed following steps

                        pfSense
                        Adapter 1
                        Bridge
                        eth0 (also tried eth1)

                        Adapter 2
                        Internal Network
                        intnet

                        WAN still can't connect ISP

                        WAN (wan) -> em1 -> NONE (DHCP)
                        LAN (lan) -> em0 -> 192.168.1.1

                        VM Ubuntu
                        Adapter 1
                        Bridge
                        eth1 (also tried eth0)

                        same output;

                        $ sudo ifconfig```

                        lo        Link encap:Local Loopback 
                                  inet addr:127.0.0.1  Mask:255.0.0.0
                                  inet6 addr: ::1/128 Scope:Host
                                  UP LOOPBACK RUNNING  MTU:65536  Metric:1
                                  RX packets:176 errors:0 dropped:0 overruns:0 frame:0
                                  TX packets:176 errors:0 dropped:0 overruns:0 carrier:0
                                  collisions:0 txqueuelen:0
                                  RX bytes:14432 (14.4 KB)  TX bytes:14432 (14.4 KB)

                        
Rgds
satimis
                        1 Reply Last reply Reply Quote 0
                        • stephenw10S
                          stephenw10 Netgate Administrator
                          last edited by

                          You changed the Ubuntu VM adapter type. That has to be Internal also so it can talk to the pfSense LAN.

                          Do you have the router connected to the physical NIC that is bridged to the pfSense WAN adapter?

                          Steve

                          1 Reply Last reply Reply Quote 0
                          • S
                            satimis
                            last edited by

                            @stephenw10:

                            You changed the Ubuntu VM adapter type. That has to be Internal also so it can talk to the pfSense LAN.

                            Have another round

                            pfSense
                            Adapter 1
                            Bridge
                            eth0

                            Adapter 2
                            Internal Network
                            intnet

                            WAN (wan) -> em1 -> NONE (DHCP)
                            LAN (lan) -> em0 -> 192.168.1.1

                            VM Ubuntu
                            Adapter 1
                            Internal Network
                            intnet

                            $ sudo ifconfig```

                            lo        Link encap:Local Loopback 
                                      inet addr:127.0.0.1  Mask:255.0.0.0
                                      inet6 addr: ::1/128 Scope:Host
                                      UP LOOPBACK RUNNING  MTU:65536  Metric:1
                                      RX packets:16 errors:0 dropped:0 overruns:0 frame:0
                                      TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
                                      collisions:0 txqueuelen:0
                                      RX bytes:1312 (1.3 KB)  TX bytes:1312 (1.3 KB)

                            
$ ping 192.168.1.1```

connect: Network is unreachable

                            pfSense
                            Adapter 1
                            Bridge
                            eth1

                            WAN (wan) -> em1 -> NONE (DHCP)
                            LAN (lan) -> em0 -> 192.168.1.1

                            VM Ubuntu
                            Adapter 1
                            Internal Network
                            intnet

                            $ sudo ifconfig

                            
eth0      Link encap:Ethernet  HWaddr 08:00:27:10:8c:3d  
          inet6 addr: fe80::a00:27ff:fe10:8c3d/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1 errors:0 dropped:0 overruns:0 frame:0
          TX packets:51 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:60 (60.0 B)  TX bytes:11704 (11.7 KB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:464 errors:0 dropped:0 overruns:0 frame:0
          TX packets:464 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:37760 (37.7 KB)  TX bytes:37760 (37.7 KB)

                            Do you have the router connected to the physical NIC that is bridged to the pfSense WAN adapter?

                            No.  If PC1 is connected behind a router.  It worked already, about 2 days ago.

                            Present connection:
                            ISP -> Cable Modem -> PC1
                            Interface - pppoe

                            satimis

                            1 Reply Last reply Reply Quote 0
                            • stephenw10S
                              stephenw10 Netgate Administrator
                              last edited by

                              Hmm, OK. So if both the pfSense LAN and the Ubuntu NIC are on the same internal network then either the DHCP server is not enabled on the pfSense (it would be enabled by default) or the Ubuntu VM is not set to use DHCP.
                              In your second setup you can see the Ubuntu VM sees the interface as UP but isn't receiving an IP.

                              If you have the router in place then it will hand out an IP to the pfSense WAN and you will be able see immediately if you have the correct adapters assigned to the interfaces.

                              Steve

                              1 Reply Last reply Reply Quote 0
                              • S
                                satimis
                                last edited by

                                Hi Steve

                                The problem is my modem only has 1 IP address to assign.  Debian Host is getting this IP address before pfSense starts up.  I must sort out this problem first.  Secondly login and password are needed for assigning IP address.  Where shall I enter them to assign the IP address to pfSense in order to get connection to Internet?

                                satimis

                                1 Reply Last reply Reply Quote 0
                                • stephenw10S
                                  stephenw10 Netgate Administrator
                                  last edited by

                                  Well you could do that but as you say you need to be able to enter the PPP username/password to pfSense and you can only do that (without resorting to manually editing files) via the webgui. To access the webgui you need to sort out the connection between the pfSense LAN interface and Ubutu VM you're using for administration.
                                  If you put the router back inplace between the modem and PC1 then it will hand out a private IP to pfSense which you will be able to immediately see in the pfSense console. That will make it much easier to determine that you have the LAN interface assigned to the correct VM adapter and that that adapter is configured correctly.

                                  Steve

                                  1 Reply Last reply Reply Quote 0
                                  • D
                                    doktornotor Banned
                                    last edited by

                                    Cannot you just add serial port in Virtualbox and use that as console?

                                    1 Reply Last reply Reply Quote 0
                                    • stephenw10S
                                      stephenw10 Netgate Administrator
                                      last edited by

                                      You could but there's no need to do that you can already access the virtual VGA console. To configure the WAN for PPPoE you pretty much need to do it from the LAN side via the webgui.

                                      Any second opinions on this are welcomed. As I said earlier in the thread I've used VBox only a few times and not recently so most of what I've said here is based on research rather than experience.

                                      Steve

                                      1 Reply Last reply Reply Quote 0
                                      • D
                                        doktornotor Banned
                                        last edited by

                                        Only have ESXi and Hyper-V boxes available ATM, so… afraid I won't be of much help. I kinda don't understand what's the trouble here then. The web GUI does not work with WAN down, or what? If it does not, what's the problem with assigning some static temp IP to WAN meanwhile, just to get it running?

                                        1 Reply Last reply Reply Quote 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator
                                          last edited by

                                          There are two issues.
                                          The first is configuring the pfSense WAN interface to connect using PPPoE via a bridged adapter in VBox to the physical NIC and the cable modem. However we havne't yet actually tackled that because of the second issue…
                                          Configuring the pfSense WAN to PPPoE needs (or is very much easier) to be done from the LAN side. Here the LAN interface is connected to an internal virtual network only so we have added an Ubuntu VM on that same network in order to fire up a browser and point it at the pfSense webgui. Currently the Ubuntu VM is not receiving an IP from the pfSense DHCP server. This should be pretty easy to accomplish. It's not helped by the fact that earlier access to the pfSense webgui was established via some accidental bridging route.

                                          If you're up for it read back through the thread, try not to shout at the computer to much!  ;)

                                          Steve

                                          1 Reply Last reply Reply Quote 0
                                          • S
                                            satimis
                                            last edited by

                                            Hi all,

                                            Performed following steps but still fail.

                                            Connection
                                            ISP -> Modem -> PC

                                            Make following changes:

                                            Host

                                            /etc/network/interfaces```

                                            The loopback network interface

                                            auto lo
                                            iface lo inet loopback

                                            auto eth0
                                            iface eth0 inet static
                                            #(configure Debian host not using DHCP for the eth0 interface)

                                            auto vboxnet0
                                            iface vboxnet0 inet dhcp
                                            #(configure debian host to connect to the pfSence router via the LAN port)

                                            
pfSense:
======
NIC1 of pfSence host - Adapter 1 - Bridged to eth0\. (also tried eth1/Internal Network)
NIC2 Adapter 2 - Host-Only Adapter
Name vboxnet0

Reboot Host

$ sudo ifconfig```

eth1      Link encap:Ethernet  HWaddr 90:f6:52:03:57:86  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:43 Base address:0xc000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:24 errors:0 dropped:0 overruns:0 frame:0
          TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:1584 (1.5 KiB)  TX bytes:1584 (1.5 KiB)

vboxnet0  Link encap:Ethernet  HWaddr 0a:00:27:00:00:00  
          inet addr:192.168.56.1  Bcast:192.168.56.255  Mask:255.255.255.0
          inet6 addr: fe80::800:27ff:fe00:0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:54 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:9229 (9.0 KiB)

                                            Started pfSense

                                            
....
....
Configuring WAN interface .... starting pppoe link... done
.......
Starting NTP time client...Error : hostname nor servname provided, or not known
(held here for sometime)

WAN (wan)  ->  pppoe0  ->  NONE (PPPoE)
LAN (lan)  ->  em0  ->  192.168.1.1
....
....

                                            (see attached photo image)

                                            VM Ubuntu 12.04 64bit

                                            Adapter -1
                                            Bridge
                                            eth0

                                            Start VM
                                            Warning:```

                                            The virtual machine execution may run into an error condition as
                                            described below.  We suggest that you take an appropriate
                                            action to avert the error.

                                            Bridged interface eth0 is down.  Guest will not be able to use
                                            this interface.

                                            Details
                                            Error ID:  BridgeInterfaceDown
                                            Severity:  Warning

                                            
Login pfSense (192.168.1.1)

Username
admin
Password
pfsense
-> Login

-> Interfaces -> WAN
Description  WAN

Type  PPPoE

Username (xxxxxxx)
Password (xxxxxx)

(check)
Block private networks
Block bogon networks
-> Save

Warning```

Interfaces: WAN
The WAN configuration has been changed.
You must apply the changes in order for them to take effect.
Don't forget to adjust the DHCP Server range if needed after applying.

                                            -> Apply Changes

                                            -> Status -> Interfaces -> click (connect)

                                            Still failed (see attached photo image)

                                            According to following document:-
                                            pfSense initial configuration with ADSL WAN
                                            http://www.interspective.net/2012/05/pfsense-initial-configuration-adsl-wan.html

                                            
....
The first thing you want to do is use a web browser to connect to your old modem / router and set the WAN interface to 'Bridge Mode'. Once you've logged in you will need to find the WAN type....

                                            First I'm not allowed to touch the modem, impossible making change on its settings.  Besides there will be no sense using the router to continue this test.  My goal is using vRouter (pfSense)

                                            I think my chance of success being remote?  I'll buy a new router after switching to the new ISP on the coming April (the current router is on loan).

                                            Rgds
                                            satimis

                                            Screenshot_pfsense_20140309.png
                                            Screenshot_pfsense_20140309.png_thumb
                                            Screenshot_wan_interface_20140309.png
                                            Screenshot_wan_interface_20140309.png_thumb
                                            Screenshot_lan_20140310.png
                                            Screenshot_lan_20140310.png_thumb

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.