Hardware Advice
-
An Recent/compatible Atom ITX with dual NIC should be enough for that bandwidth.
If power consumption is a issue check the new Alix APUc boards.
https://forum.pfsense.org/index.php?topic=59555.0 -
These would be good:
http://www.supermicro.com/products/motherboard/celeron/X10/X10SBA.cfm
http://www.supermicro.com/products/motherboard/Atom/X10/A1SAM-2550F.cfmIf the NIC's are supported. Otherwise when does 2.2 come out, I will wait.
-
Why do you need gigabit capability? I assume you are planning multiple internal subnets/interfaces.
Steve
-
I know I don't really need gigabit connectivity since I have a 5 megabit dsl connection. Its only that I learned that your common consumer grade home router isn't even capable of routing at gigabit speeds. I'm assuming thats LAN to LAN? No I am not planning multiple internal subnets/interfaces. I'm also guessing that the bottleneck in my network is going to be hard disk read speed (from my NAS) so gigabit would be pointless?
-
Traffic between internal machines on the same subnet will not pass through pfSense at all, only your switch. Hence in a machine with 2 interfaces the maximum throughput is limited by which ever is slower, 5Mbps in your case. So if you build a machine capable of firewalling 1Gbps it will be 200X faster than it need be. ;)
Now having multiple internal interfaces is not a bad idea. It allows you to, for example, segregate your wifi clients from wired or add a guest wifi network that has internet access but not access to your NAS.Steve
-
In other words the VK-2D13 would do the job? Until the connection exceeds 87 Mbps?
-
In other words the VK-2D13 would do the job? Until the connection exceeds 87 Mbps?
Basically, but there is no headroom in that box.
Wait two weeks, buy an APU from either pfSense directly or Netgate (they come out of the same warehouse, shipped by the same people.)
-
Yeah 500 Mhz single core with 256 MB of RAM is kind of limited. What comes out in 2 weeks?
-
The new PC-Engines APU board I believe:
https://forum.pfsense.org/index.php?topic=59555.0Steve
-
The apu.1c4 sounds awesome although I would like to see performance data compared to the older model.
