After adding second wan, pfsense hangs

[TLP]

Hello, after adding the second wan, the firewall hangs and cant navigate to pfsense webgui or to the internet, it keep hanging and returning

what can it be??
thanks

[TLP]

I receive the following error

503 - Service Not Available

[TLP]

And after setting the new wan(opt1), I started receiving the following errors on my openvpn and lan
I deleted the wan(opt1) but the error persists

edit
Not sure if this helps but these are my NICs
bce0 - OPT1 - Offboard - Broadcom BCM5709 PCI-Express Dual Port Gigabit
bce1 - Never used - Offboard - Broadcom BCM5709 PCI-Express Dual Port Gigabit
bce2 - Never used - Offboard - Broadcom BCM5709 PCI-Express Dual Port Gigabit
bce3 - Never used - Offboard - Broadcom BCM5709 PCI-Express Dual Port Gigabit
bce4 - LAN - Onboard - Broadcom BCM5716 Dual Port Gigabit
bce5 - WAN - Onboard - Broadcom BCM5716 Dual Port Gigabit

[galaxy60]

In your firewall rules can you make sure that your openvpn has an allow all rule, also what rule do you have on your LAN  for outbound traffic some screen shots would be nice

[TLP]

Both have rules "Allow All-to-All"
The problem is with the fragmented packets, that pfsense blocks by default (which is the correct thing to do)