Can anyone tell me where I am screwing up -Networking - OPT2 as Wifi Acces point
-
Hi
I am trying to use my Opt2 connected to a TP-LINK WAP with the ip address configured as follows:
on the OPT2 interface - a static ip address as 10.0.10.254/24
On the Wireless access point - 10.0.10.254 as the IP address, 255.255.255.0 as subnet mask and 10.0.10.254 as gateway and DCHP turned off
I have DHCP turned on on the OPT2 to give out 10.0.10.100-200
My main network on LAN is configured as 10.0.0.254 with DHCP turned on and this works perfect.
But I can never get an IP address from the wireless access point.
Where am I going wrong? I appreciate ANY help as I have wasted a day on this.
-
Your Access Point device has the same address as your OPT2 interface. You need to change one of them.
Steve
-
seriously… i am a dumbass so... I will go sort that out... thanks a lot
