Ath0 not detected on Alix 2D13
-
Just want to throw it out there, if anyone does get their ath0 wireless N card working, it would be handy to know any steps you did to set it up. I went to test my atheros 5416 chipset card (Dlink DWA-552) and am happy to report it no longer causes a kernel panic. (anything FreeBSD 8 and it's not happy) I set it up as the WAN interface on a test box and it automatically connected itself to an open network, got an IP and appears to have internet. I wasn't able to get it to connect to a secured network however and it didn't look like the rescan option worked as it couldn't find any networks. Haven't had time to investigate why yet.
This was done on the April 7th snapshot..
-
2.2-ALPHA (i386)
built on Wed Apr 9 09:01:59 CDT 2014
FreeBSD 10.0-STABLEStill no "ath0" available in Interfaces->Assign on my Alix 2D13.
-
2.2-ALPHA (i386)
built on Sun Apr 13 15:35:58 CDT 2014
FreeBSD 10.0-STABLEath0 is back on Alix 2D13! Very good. I have set it up in Access Point mode, enabled DHCP and added firewall rules and it is working as expected. I am posting across that now.
-
-
I don't know about that. I think the card in my Alix 2D13 is only b/g
-
I tested an N card and it's not recognised anymore.
It was recognised in an earlier version.Is still shown as:
none2@pci0:4:0:0: class=0x028000 card=0x3123168c chip=0x0033168c rev=0x01 hdr=0x00
class = network -
Can you tell me which vrsion it was recognized before?
Its a PCI card and nothing should have changed there afaik.
I see it even supported by ath AR9300_DEVID_AR9580_PCIE
-
The march 27 version.
It seems these files aren't on the snapshot server anymore. -
A March 27th image was the last time I saw if_cdce.ko; I suspect many modules have been missing since then.
-
Those are inside the kernel nowdays.
And if_cdce iirc is for USB interfaces while this is a PCIe one.
Judging on the other seeing the ath interface for assignment this is a bit strange happening.Though can you try with the next set that will come out?
-
As a test i downloaded the current amd64 memstick serial and booted from this one.
There the card is detected correctly.The version on the sata was upgraded with the autoupgrade function.
I reinstalled and the card seems to work now.
-
Waiting on feedback for N wireless now :)
-
Well the gui is severely lacking in config options.
Shorlty what i'm missing most:
Antenna selection. Since we are working with MIMO devices now there is no more primary/secondary antenna, but all at once.
Some mechanism to select the active chains is required here.
Other stuff which is missing selection option:
HT20/HT40
LDCP
RXSTBC1,12,123
TXSTBC
short GI 20/40Some preliminary tests show that most of it is enabled by default.
Will test some more tomorrow. -
Ok did some tests.
pfSense side:
PC1 connected to APU with an AR9580 (3x3)
PC2 side: AR9580 (3x3)on 2.4GHz
40MHz,
Switching between MCS22 and MCS23
Switching between short GI on and off[ 3] 167.0-168.0 sec 34.3 MBytes 288 Mbits/sec 0.043 ms 0/24451 (0%)
[ 3] 168.0-169.0 sec 33.5 MBytes 281 Mbits/sec 0.066 ms 0/23869 (0%)
[ 3] 169.0-170.0 sec 32.4 MBytes 271 Mbits/sec 0.046 ms 0/23076 (0%)
[ 3] 170.0-171.0 sec 33.9 MBytes 284 Mbits/sec 0.044 ms 0/24176 (0%)
[ 3] 171.0-172.0 sec 34.2 MBytes 287 Mbits/sec 0.041 ms 0/24402 (0%)
[ 3] 172.0-173.0 sec 34.5 MBytes 289 Mbits/sec 0.033 ms 0/24612 (0%)
[ 3] 173.0-174.0 sec 34.7 MBytes 291 Mbits/sec 0.051 ms 0/24763 (0%)
[ 3] 174.0-175.0 sec 32.5 MBytes 273 Mbits/sec 0.090 ms 0/23206 (0%)
[ 3] 175.0-176.0 sec 30.8 MBytes 258 Mbits/sec 0.051 ms 1/21953 (0.0046%)
[ 3] 176.0-177.0 sec 29.4 MBytes 247 Mbits/sec 0.044 ms 0/20995 (0%)
[ 3] 177.0-178.0 sec 31.1 MBytes 261 Mbits/sec 0.034 ms 0/22208 (0%)
[ 3] 178.0-179.0 sec 33.8 MBytes 283 Mbits/sec 0.173 ms 0/24107 (0%)
[ 3] 179.0-180.0 sec 32.9 MBytes 276 Mbits/sec 0.155 ms 0/23466 (0%)
[ 3] 180.0-181.0 sec 32.2 MBytes 270 Mbits/sec 0.034 ms 0/22993 (0%)
[ 3] 181.0-182.0 sec 30.6 MBytes 257 Mbits/sec 0.039 ms 0/21830 (0%)
[ 3] 182.0-183.0 sec 35.0 MBytes 294 Mbits/sec 0.134 ms 0/24979 (0%)
[ 3] 183.0-184.0 sec 32.0 MBytes 268 Mbits/sec 0.051 ms 0/22812 (0%)
[ 3] 184.0-185.0 sec 34.6 MBytes 290 Mbits/sec 0.036 ms 0/24650 (0%)
[ 3] 185.0-186.0 sec 34.7 MBytes 291 Mbits/sec 0.034 ms 0/24729 (0%)on 5GHz
40MHz,
Switching between MCS22 and MCS23
Switching between short GI on and off[ 3] 117.0-118.0 sec 34.2 MBytes 287 Mbits/sec 0.057 ms 0/24365 (0%)
[ 3] 118.0-119.0 sec 33.4 MBytes 280 Mbits/sec 0.055 ms 0/23841 (0%)
[ 3] 119.0-120.0 sec 31.6 MBytes 265 Mbits/sec 0.035 ms 0/22567 (0%)
[ 3] 120.0-121.0 sec 35.2 MBytes 296 Mbits/sec 0.055 ms 0/25139 (0%)
[ 3] 121.0-122.0 sec 32.7 MBytes 274 Mbits/sec 0.057 ms 0/23306 (0%)
[ 3] 122.0-123.0 sec 33.8 MBytes 283 Mbits/sec 0.060 ms 0/24087 (0%)
[ 3] 123.0-124.0 sec 30.3 MBytes 254 Mbits/sec 0.115 ms 0/21628 (0%)
[ 3] 124.0-125.0 sec 32.8 MBytes 275 Mbits/sec 0.031 ms 0/23420 (0%)
[ 3] 125.0-126.0 sec 31.8 MBytes 267 Mbits/sec 0.051 ms 0/22673 (0%)
[ 3] 126.0-127.0 sec 34.9 MBytes 293 Mbits/sec 0.039 ms 0/24888 (0%)
[ 3] 127.0-128.0 sec 30.4 MBytes 255 Mbits/sec 0.123 ms 0/21713 (0%)
[ 3] 128.0-129.0 sec 30.1 MBytes 253 Mbits/sec 0.040 ms 0/21477 (0%)
[ 3] 129.0-130.0 sec 31.7 MBytes 266 Mbits/sec 0.073 ms 0/22636 (0%)
[ 3] 130.0-131.0 sec 31.5 MBytes 264 Mbits/sec 0.044 ms 0/22457 (0%)
[ 3] 131.0-132.0 sec 31.3 MBytes 263 Mbits/sec 0.051 ms 0/22348 (0%)
[ 3] 132.0-133.0 sec 34.0 MBytes 285 Mbits/sec 0.048 ms 0/24243 (0%)
[ 3] 133.0-134.0 sec 33.7 MBytes 283 Mbits/sec 0.046 ms 0/24063 (0%)
[ 3] 134.0-135.0 sec 35.9 MBytes 301 Mbits/sec 0.043 ms 0/25585 (0%)
[ 3] 135.0-136.0 sec 35.9 MBytes 302 Mbits/sec 0.046 ms 0/25641 (0%)
[ 3] 136.0-137.0 sec 35.9 MBytes 302 Mbits/sec 0.041 ms 0/25642 (0%)
