Stuck on 2.1 after auto and manual upgrades to 2.1.2
-
I have tried the auto invoke method and the manual method. The upgrade appears to go fine and the system reboots, but it still reports I am at 2.1 and an upgrade is available.
I am running nanobsd 2g i386 on an Alix board (a netgate kit).
I see someone else had a similar problem.
If I look at the diag/nanobsd/view upgrade log, the first lines are:NanoBSD Firmware upgrade in progress…
Installing /root/firmware.tgz.
SLICE 1
OLDSLICE 2
TOFLASH ad0s1
COMPLETE_PATH ad0s1a
GLABEL_SLICE pfsense0
Fri Apr 11 18:33:22 CDT 2014-Paul
-
I'm having the same issue. After trying the upgrade twice, I'm stuck on 2.1 from September 2013.
It is unclear to me what my next step should be.Any experts listening?
Thanks,
Dave -
I am stuck in the same spot, but investigating this- I see my available free space as only 907MB, the decompressed image is actually 986M. This is likely where I am getting hung up. I'll either have to find a way to clear some space or do a clean install and restore my config and rebuild packages :-\