Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Suricata IDS 1.4.6 BETA package update v0.3 released

    Scheduled Pinned Locked Moved pfSense Packages
    41 Posts 12 Posters 13.3k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • D
      DiskWizard
      last edited by

      First, I'd like to apologize if my comment is incorrect. I am not the native english speaker.  The tabs "Check" and "Force" have the "opposite" meanings for me. If you want to just "Check" the program shouldn't download anything, just notify me.

      1. GA-N3150M-D3P 8Gb RAM

      2. GA-C1037EN-EU 4GB RAM

      • 2,5 SATA III Solid State Drive SLIM S60
      1 Reply Last reply Reply Quote 0
      • D
        DiskWizard
        last edited by

        ?! Erm, maybe it is considered to be Update&Upgrade meaning updating the rules and upgrading the software accordingly ?!

        1. GA-N3150M-D3P 8Gb RAM

        2. GA-C1037EN-EU 4GB RAM

        • 2,5 SATA III Solid State Drive SLIM S60
        1 Reply Last reply Reply Quote 0
        • bmeeksB
          bmeeks
          last edited by

          @DiskWizard:

          ?! Erm, maybe it is considered to be Update&Upgrade meaning updating the rules and upgrading the software accordingly ?!

          The two buttons were intended to work this way.  Your comment about "checking" versus "updating" is valid, though.

          The original behavior was to download the MD5 hash from the publisher's web site and compare the hash to the locally stored hash for the current rules package.  If the hash codes matched, nothing else was done.  If they did not match, new rules would be downloaded and applied to all running Snort processes (according to the specific rules enabled for each process).  There were occasions when a "bad" rules package would be downloaded but the MD5 hash file was OK.  In this situation, in order to get a fresh uncorrupted rules package, a manual edit of the MD5 hash file was required to "force" a mismatch in hash values so a new package would download.  This is what the new FORCE button does.  It downloads a fresh rules package without testing the MD5 hash first.

          Bill

          1 Reply Last reply Reply Quote 0
          • S
            ScottCall
            last edited by

            Is there a trick to getting Suricata to start?  (Do I need to reboot, for example?)

            The documentation doesn't make this clear and I'm currently unable to start Suricata by clicking on the red "X" icon, I get this in the logs:
            Apr 14 18:07:38 pf1 php: /suricata/suricata_interfaces.php: Toggle (suricata starting) for XXX(Xxx Internet)…
            Apr 14 18:07:42 pf1 php: /suricata/suricata_interfaces.php: [Suricata] Updating rules configuration for: XXX …
            Apr 14 18:07:45 pf1 php: /suricata/suricata_interfaces.php: [Suricata] Building new sig-msg.map file for XXX…
            Apr 14 18:07:49 pf1 php: /suricata/suricata_interfaces.php: [Suricata] Suricata START for XXX Internet(igb6)…

            but then it returns to the config screen with the red X still present and no suricata processes running.

            I'm running 2.1-RELEASE on 4GB Nano.

            Please Advise

            1 Reply Last reply Reply Quote 0
            • BBcan177B
              BBcan177 Moderator
              last edited by

              Did you perform a Rules Update? If not, that needs to be done first before it will start.

              "Experience is something you don't get until just after you need it."

              Website: http://pfBlockerNG.com
              Twitter: @BBcan177  #pfBlockerNG
              Reddit: https://www.reddit.com/r/pfBlockerNG/new/

              1 Reply Last reply Reply Quote 0
              • S
                ScottCall
                last edited by

                @BBcan17:

                Did you perform a Rules Update? If not, that needs to be done first before it will start.

                Yeah before I configured the interfaces and tried to start.

                Thanks

                1 Reply Last reply Reply Quote 0
                • bmeeksB
                  bmeeks
                  last edited by

                  @ScottCall:

                  @BBcan17:

                  Did you perform a Rules Update? If not, that needs to be done first before it will start.

                  Yeah before I configured the interfaces and tried to start.

                  Thanks

                  Goto the LOGS MGMT tab and open the suricata.log by selecting it in the drop-down selector to view the contents.  See what errors are in there.  Suricata logs it's stuff to its own private log file.  Report back if you see something in there.

                  Bill

                  1 Reply Last reply Reply Quote 0
                  • S
                    ScottCall
                    last edited by

                    @bmeeks:

                    Goto the LOGS MGMT tab and open the suricata.log by selecting it in the drop-down selector to view the contents.  See what errors are in there.  Suricata logs it's stuff to its own private log file.  Report back if you see something in there.

                    Bill

                    Thanks Bill.

                    I checked under the "Logs Browser" and none of the logs exist, they all return "Log file does not exist or that logging feature is not enabled."

                    I'm using ETOpen, Snort VRT (free registered) and Snort GPLv2.

                    I'll schedule some time to reboot the firewall to see if that's what it needs.

                    Thanks
                    -S

                    1 Reply Last reply Reply Quote 0
                    • bmeeksB
                      bmeeks
                      last edited by

                      @ScottCall:

                      @bmeeks:

                      Goto the LOGS MGMT tab and open the suricata.log by selecting it in the drop-down selector to view the contents.  See what errors are in there.  Suricata logs it's stuff to its own private log file.  Report back if you see something in there.

                      Bill

                      Thanks Bill.

                      I checked under the "Logs Browser" and none of the logs exist, they all return "Log file does not exist or that logging feature is not enabled."

                      I'm using ETOpen, Snort VRT (free registered) and Snort GPLv2.

                      I'll schedule some time to reboot the firewall to see if that's what it needs.

                      Thanks
                      -S

                      Whoa!  That's certainly not right.  The suricata.log file should always exist as it is created with any attempted start of Suricata.  Something is seriously borked with the Suricata install is my suspicion.  A reboot and possible reinstall of Suricata would be a good start.

                      EDIT UPDATE: just re-read your original post and noticed the NanoBSD mention.  I overlooked that previously. That could be the problem.  There may be some problems with Suricata forgetting to put the file system in R/W mode before it writes configuration information.  I did all my development and testing on regular installs with hard disks (well, virtual hard disks in VMs).  I have not tested Suricata on something like NanoBSD.  You also may not have enough RAM to run Suricata and pfSense.  You said 4 GB, so I assume that is total CF capacity.  The OS is going to take a bit, and then Suricata gets what's left over.  That is not going to be much.

                      Bill

                      1 Reply Last reply Reply Quote 0
                      • S
                        ScottCall
                        last edited by

                        I did the nano install to try pfSense over the existing (commercial, expensive and outdated) install on the boxes.  I've been planning on converting them to HDD based installs anyways, so I'll hold off on suricata until then.

                        Thanks!

                        1 Reply Last reply Reply Quote 0
                        • bmeeksB
                          bmeeks
                          last edited by

                          @ScottCall:

                          I did the nano install to try pfSense over the existing (commercial, expensive and outdated) install on the boxes.  I've been planning on converting them to HDD based installs anyways, so I'll hold off on suricata until then.

                          Thanks!

                          It should work fine on a conventional HDD (or SSD) installation.  Unfortunately, I don't have a CF system to test with.

                          Bill

                          1 Reply Last reply Reply Quote 0
                          • G
                            Gibbon_99
                            last edited by

                            Hi

                            My logs are full of this message when starting Suricata

                            
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap</error></error></error></error></error></error></error></error></error></error></error></error></error></error></error></error></error></error> 

                            
Version

2.1.2-RELEASE (amd64)
built on Thu Apr 10 05:42:13 EDT 2014
FreeBSD 8.3-RELEASE-p15

You are on the latest version.

                            Any pointers?

                            Thanks

                            1 Reply Last reply Reply Quote 0
                            • bmeeksB
                              bmeeks
                              last edited by

                              @Gibbon_99:

                              Hi

                              My logs are full of this message when starting Suricata

                              
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
Apr 17 17:50:44 	suricata[24023]: 17/4/2014 -- 17:50:44 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap</error></error></error></error></error></error></error></error></error></error></error></error></error></error></error></error></error></error> 

                              
Version

2.1.2-RELEASE (amd64)
built on Thu Apr 10 05:42:13 EDT 2014
FreeBSD 8.3-RELEASE-p15

You are on the latest version.

                              Any pointers?

                              Thanks

                              Have not seen that error before.  This essentially means the protocol on the interface is not supported by Suricata.  Let me first ask you to try the old standard technique of removing Suricata and reinstalling.  Before doing this, go to the GLOBAL SETTINGS tab and check the box near the bottom of the page to retain Suricata settings when deinstalling.  Save that change and then remove the package under System…Packages from the pfSense menu.  When removal is complete, install it again.

                              Please report back on the result.  Also, can you post what the interfaces are you are using Suricata on?  By that I mean vanilla Ethernet, or maybe something like PPP or some kind of tunneling interface?

                              Bill

                              1 Reply Last reply Reply Quote 0
                              • S
                                Supermule Banned
                                last edited by

                                Remember to reboot after deinstall….before you install it again!

                                1 Reply Last reply Reply Quote 0
                                • G
                                  Gibbon_99
                                  last edited by

                                  @bmeeks:

                                  Have not seen that error before.  This essentially means the protocol on the interface is not supported by Suricata.  Let me first ask you to try the old standard technique of removing Suricata and reinstalling.  Before doing this, go to the GLOBAL SETTINGS tab and check the box near the bottom of the page to retain Suricata settings when deinstalling.  Save that change and then remove the package under System…Packages from the pfSense menu.  When removal is complete, install it again.

                                  Please report back on the result.  Also, can you post what the interfaces are you are using Suricata on?  By that I mean vanilla Ethernet, or maybe something like PPP or some kind of tunneling interface?

                                  Bill

                                  Remove and reinstall done - no change - still get the error when using the WAN interface.

                                  I have created a LAN interface mapping, and it works just fine.

                                  The WAN mapping is a PPPOE interface - looks like that type is not yet supported.

                                  Here is the log for the working LAN interface ( type em0 ):

                                  
18/4/2014 -- 12:42:24 - <info>-- allocated 1572864 bytes of memory for the defrag hash... 65536 buckets of size 24
18/4/2014 -- 12:42:24 - <info>-- preallocated 65535 defrag trackers of size 120
18/4/2014 -- 12:42:24 - <info>-- defrag memory usage: 9437064 bytes, maximum: 33554432
18/4/2014 -- 12:42:24 - <info>-- AutoFP mode using "Active Packets" flow load balancer
18/4/2014 -- 12:42:24 - <info>-- preallocated 1024 packets. Total memory 4294656
18/4/2014 -- 12:42:24 - <info>-- allocated 98304 bytes of memory for the host hash... 4096 buckets of size 24
18/4/2014 -- 12:42:24 - <info>-- preallocated 1000 hosts of size 96
18/4/2014 -- 12:42:24 - <info>-- host memory usage: 194304 bytes, maximum: 16777216
18/4/2014 -- 12:42:24 - <info>-- allocated 1572864 bytes of memory for the flow hash... 65536 buckets of size 24
18/4/2014 -- 12:42:24 - <info>-- preallocated 10000 flows of size 224
18/4/2014 -- 12:42:24 - <info>-- flow memory usage: 3812864 bytes, maximum: 33554432
18/4/2014 -- 12:42:24 - <info>-- IP reputation disabled
18/4/2014 -- 12:42:24 - <info>-- Added "35" classification types from the classification file
18/4/2014 -- 12:42:24 - <info>-- Added "19" reference types from the reference.config file
18/4/2014 -- 12:42:24 - <info>-- using magic-file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/magic
18/4/2014 -- 12:42:24 - <info>-- Delayed detect enabled
18/4/2014 -- 12:42:24 - <info>-- Packets will start being processed before signatures are active.
18/4/2014 -- 12:42:24 - <info>-- Threshold config parsed: 1 rule(s) found
18/4/2014 -- 12:42:24 - <info>-- Core dump size is unlimited.
18/4/2014 -- 12:42:24 - <info>-- fast output device (regular) initialized: alerts.log
18/4/2014 -- 12:42:24 - <info>-- Unified2-alert initialized: filename unified2.alert, limit 32 MB
18/4/2014 -- 12:42:24 - <info>-- http-log output device (regular) initialized: http.log
18/4/2014 -- 12:42:24 - <info>-- Syslog output initialized
18/4/2014 -- 12:42:24 - <info>-- Using 1 live device(s).
18/4/2014 -- 12:42:24 - <info>-- using interface em0
18/4/2014 -- 12:42:24 - <info>-- Running in 'auto' checksum mode. Detection of interface state will require 1000 packets.
18/4/2014 -- 12:42:24 - <info>-- Found an MTU of 1500 for 'em0'
18/4/2014 -- 12:42:24 - <info>-- Set snaplen to 1500 for 'em0'
18/4/2014 -- 12:42:24 - <info>-- RunModeIdsPcapAutoFp initialised
18/4/2014 -- 12:42:24 - <info>-- stream "max-sessions": 262144
18/4/2014 -- 12:42:24 - <info>-- stream "prealloc-sessions": 32768
18/4/2014 -- 12:42:24 - <info>-- stream "memcap": 33554432
18/4/2014 -- 12:42:24 - <info>-- stream "midstream" session pickups: disabled
18/4/2014 -- 12:42:24 - <info>-- stream "async-oneside": disabled
18/4/2014 -- 12:42:24 - <info>-- stream "checksum-validation": disabled
18/4/2014 -- 12:42:24 - <info>-- stream."inline": disabled
18/4/2014 -- 12:42:24 - <info>-- stream.reassembly "memcap": 67108864
18/4/2014 -- 12:42:24 - <info>-- stream.reassembly "depth": 0
18/4/2014 -- 12:42:24 - <info>-- stream.reassembly "toserver-chunk-size": 2560
18/4/2014 -- 12:42:24 - <info>-- stream.reassembly "toclient-chunk-size": 2560
18/4/2014 -- 12:42:24 - <info>-- all 7 packet processing threads, 1 management threads initialized, engine started.
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - Signature combines packet specific matches (like dsize, flags, ttl) with stream / state matching by matching on app layer proto (like using http_* keywords).
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $HOME_NET any -> $EXTERNAL_NET 1024:65535 (msg:"MALWARE-CNC Win.Trojan.Fakeavlock variant outbound connection"; flow:to_server,established; dsize:267<>276; content:"User-Agent|3A| Mozilla/5.0 (Windows|3B| U|3B| MSIE 9.0|3B| Windows NT 9.0|3B| en-US)|0D 0A|"; fast_pattern:only; http_header; urilen:159; pcre:"/\x2f[A-F0-9]{158}/U"; metadata:impact_flag red, policy balanced-ips drop, policy security-ips drop, ruleset community, service http; reference:url,www.virustotal.com/file/c49f7dbc036ad0a86df02cbbde00cb3b3fbd651d82f6c9c5a98170644374f64f/analysis/; classtype:trojan-activity; sid:25675; rev:7;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/rules/suricata.rules at line 59
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - previous keyword has a fast_pattern:only; set. Can't have relative keywords around a fast_pattern only content
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $EXTERNAL_NET $HTTP_PORTS -> $HOME_NET any (msg:"MALWARE-OTHER Win.Trojan.Zeus Spam 2013 dated zip/exe HTTP Response - potential malware download"; flow:to_client,established; content:"-2013.zip|0D 0A|"; fast_pattern:only; content:"-2013.zip|0D 0A|"; http_header; content:"-"; within:1; distance:-14; http_header; file_data; content:"-2013.exe"; content:"-"; within:1; distance:-14; metadata:impact_flag red, policy balanced-ips drop, policy security-ips drop, ruleset community, service http; reference:url,www.virustotal.com/en/file/2eff3ee6ac7f5bf85e4ebcbe51974d0708cef666581ef1385c628233614b22c0/analysis/; classtype:trojan-activity; sid:26470; rev:1;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/rules/suricata.rules at line 94
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - previous keyword has a fast_pattern:only; set. Can't have relative keywords around a fast_pattern only content
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $HOME_NET any -> $EXTERNAL_NET $HTTP_PORTS (msg:"MALWARE-CNC Bancos fake JPG encrypted config file download"; flow:to_server,established; content:".com.br|0D 0A 0D 0A|"; fast_pattern:only; content:"/imagens/"; depth:9; http_uri; content:".jpg"; distance:0; http_uri; pcre:"/\.jpg\x20HTTP\/1\.[01]\r\nUser\x2dAgent\x3a\x20[a-z]+\r\nHost\x3a\x20[a-z0-9\x2d\x2e]+\.com\.br\r\n\r\n$/"; metadata:impact_flag red, policy balanced-ips drop, policy security-ips drop, ruleset community, service http; classtype:trojan-activity; sid:26722; rev:1;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/rules/suricata.rules at line 129
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - Signature combines packet specific matches (like dsize, flags, ttl) with stream / state matching by matching on app layer proto (like using http_* keywords).
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $HOME_NET any -> $EXTERNAL_NET $HTTP_PORTS (msg:"MALWARE-CNC Win32/Autorun.JN variant outbound connection"; flow:to_server,established; dsize:142; urilen:8; content:"/u5.htm"; fast_pattern:only; http_uri; content:"//u5.htm"; http_raw_uri; metadata:impact_flag red, policy balanced-ips drop, policy security-ips drop, ruleset community, service http; reference:url,www.microsoft.com/security/portal/threat/encyclopedia/Entry.aspx?Name=Worm%3AWin32%2FAutorun.JN; reference:url,www.virustotal.com/en/file/36144738373c665d262bc007fceaeb9613e59ec29ea3d7424dd9f400af2c0f06/analysis/; classtype:trojan-activity; sid:26966; rev:3;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/rules/suricata.rules at line 189
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - Signature combines packet specific matches (like dsize, flags, ttl) with stream / state matching by matching on app layer proto (like using http_* keywords).
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $HOME_NET any -> $EXTERNAL_NET 80 (msg:"MALWARE-CNC Win.Trojan.Conficker variant outbound connection"; flow:to_server,established; dsize:146; urilen:1; content:"GET / HTTP/1.1|0D 0A|User-Agent: Mozilla/4.0 (compatible|3B| MSIE 7.0|3B| Windows NT 5.1|3B| Trident/4.0)|0D 0A|Host: checkip.dyndns.org|0D 0A|Cache-Control: no-cache|0D 0A 0D 0A|"; fast_pattern:only; metadata:impact_flag red, policy balanced-ips drop, policy security-ips drop, ruleset community, service http; reference:url,www.sans.org/security-resources/malwarefaq/conficker-worm.php; classtype:trojan-activity; sid:28542; rev:1;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/rules/suricata.rules at line 291
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - Signature combines packet specific matches (like dsize, flags, ttl) with stream / state matching by matching on app layer proto (like using http_* keywords).
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $HOME_NET any -> $EXTERNAL_NET 80 (msg:"MALWARE-CNC Win.Trojan.Conficker variant outbound connection"; flow:to_server,established; dsize:139; urilen:1; content:"GET / HTTP/1.1|0D 0A|User-Agent: Mozilla/4.0 (compatible|3B| MSIE 7.0|3B| Windows NT 5.1|3B| Trident/4.0)|0D 0A|Host: www.ask.com|0D 0A|Cache-Control: no-cache|0D 0A 0D 0A|"; fast_pattern:only; metadata:impact_flag red, policy balanced-ips drop, policy security-ips drop, ruleset community, service http; reference:url,www.sans.org/security-resources/malwarefaq/conficker-worm.php; classtype:trojan-activity; sid:28543; rev:1;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/rules/suricata.rules at line 292
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - previous keyword has a fast_pattern:only; set. Can't have relative keywords around a fast_pattern only content
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $HOME_NET any -> $EXTERNAL_NET $HTTP_PORTS (msg:"MALWARE-CNC Win.Trojan.Injector variant outbound communication"; flow:to_server,established; urilen:9; content:"/load.exe HTTP/1.1|0D 0A|User-Agent: Mozilla/"; fast_pattern:only; content:"|3B 20|MSIE|20|"; http_header; content:")|0D 0A|Host: "; distance:0; http_header; content:!"Accept"; http_header; metadata:impact_flag red, policy balanced-ips drop, policy security-ips drop, ruleset community, service http; reference:url,urlquery.net/search.php?q=%5C%2Fload%5C.exe%24&type=regexp&start=2013-08-24&end=2013-11-22&max=400; reference:url,www.virustotal.com/en/file/032572ea1f34a060ecac98a8e2899dc0f2a41dff199e879050481ddd3818b4d0/analysis/; classtype:trojan-activity; sid:28807; rev:1;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/rules/suricata.rules at line 298
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - Signature combines packet specific matches (like dsize, flags, ttl) with stream / state matching by matching on app layer proto (like using http_* keywords).
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $HOME_NET any -> $EXTERNAL_NET $HTTP_PORTS (msg:"MALWARE-CNC Win.Trojan.WEC variant outbound connection"; flow:to_server,established; dsize:69; urilen:1; content:"GET / HTTP/1.1|0D 0A|User-Agent: Mozilla/4.0|0D 0A|Host: checkip.dyndns.org|0D 0A 0D 0A|"; fast_pattern:only; metadata:impact_flag red, policy balanced-ips drop, policy security-ips drop, ruleset community, service http; reference:url,www.virustotal.com/en/file/164c792247b2822ab1dce8271a9498d3c9172ff21d36feccf83265ded1be8d0b/analysis/; classtype:trojan-activity; sid:29882; rev:2;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/rules/suricata.rules at line 416
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - previous keyword has a fast_pattern:only; set. Can't have relative keywords around a fast_pattern only content
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $HOME_NET any -> $EXTERNAL_NET $HTTP_PORTS (msg:"MALWARE-CNC Win.Trojan.Bancos variant outbound connection "; flow:to_server,established; content:"Content-Length: 166"; content:".php HTTP/1.1|0D 0A|Accept: */*|0D 0A|Content-Type: application/x-www-form-urlencoded|0D 0A|User-Agent: Mozilla/5.0 (Windows NT 6.1|3B| Trident/7.0|3B| rv:11.0) like Gecko|0D 0A|Host: "; fast_pattern:only; content:"v="; depth:2; http_client_body; content:"&c="; within:7; http_client_body; pcre:"/\x3d\x3d$/P"; metadata:impact_flag red, policy balanced-ips drop, policy security-ips drop, ruleset community, service http; reference:url,www.virustotal.com/en/file/51540d7c9a4bc2a430bc50c85cf9cec5c6f2bb755e800a3f3575ba34fe5f008c/analysis; classtype:trojan-activity; sid:29895; rev:1;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/rules/suricata.rules at line 421
18/4/2014 -- 12:42:28 - <info>-- No packets with invalid checksum, assuming checksum offloading is NOT used
18/4/2014 -- 12:42:35 - <info>-- 2 rule files processed. 15090 rules successfully loaded, 9 rules failed</info></info></error></error></error></error></error></error></error></error></error></error></error></error></error></error></error></error></error></error></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info>

                                  Here's the log for the not working WAN interface ( type PPPOE )

                                  
18/4/2014 -- 12:46:39 - <info>-- allocated 1572864 bytes of memory for the defrag hash... 65536 buckets of size 24
18/4/2014 -- 12:46:39 - <info>-- preallocated 65535 defrag trackers of size 120
18/4/2014 -- 12:46:39 - <info>-- defrag memory usage: 9437064 bytes, maximum: 33554432
18/4/2014 -- 12:46:39 - <info>-- AutoFP mode using "Active Packets" flow load balancer
18/4/2014 -- 12:46:39 - <info>-- preallocated 1024 packets. Total memory 4294656
18/4/2014 -- 12:46:39 - <info>-- allocated 98304 bytes of memory for the host hash... 4096 buckets of size 24
18/4/2014 -- 12:46:39 - <info>-- preallocated 1000 hosts of size 96
18/4/2014 -- 12:46:39 - <info>-- host memory usage: 194304 bytes, maximum: 16777216
18/4/2014 -- 12:46:39 - <info>-- allocated 1572864 bytes of memory for the flow hash... 65536 buckets of size 24
18/4/2014 -- 12:46:39 - <info>-- preallocated 10000 flows of size 224
18/4/2014 -- 12:46:39 - <info>-- flow memory usage: 3812864 bytes, maximum: 33554432
18/4/2014 -- 12:46:39 - <info>-- IP reputation disabled
18/4/2014 -- 12:46:39 - <info>-- Added "35" classification types from the classification file
18/4/2014 -- 12:46:39 - <info>-- Added "19" reference types from the reference.config file
18/4/2014 -- 12:46:39 - <info>-- using magic-file /usr/pbi/suricata-amd64/etc/suricata/suricata_51110_pppoe0/magic
18/4/2014 -- 12:46:39 - <info>-- Delayed detect enabled
18/4/2014 -- 12:46:39 - <info>-- Packets will start being processed before signatures are active.
18/4/2014 -- 12:46:39 - <info>-- Threshold config parsed: 0 rule(s) found
18/4/2014 -- 12:46:39 - <info>-- Core dump size is unlimited.
18/4/2014 -- 12:46:39 - <info>-- fast output device (regular) initialized: alerts.log
18/4/2014 -- 12:46:39 - <info>-- http-log output device (regular) initialized: http.log
18/4/2014 -- 12:46:39 - <info>-- Syslog output initialized
18/4/2014 -- 12:46:39 - <info>-- Using 1 live device(s).
18/4/2014 -- 12:46:39 - <info>-- using interface pppoe0
18/4/2014 -- 12:46:39 - <info>-- Running in 'auto' checksum mode. Detection of interface state will require 1000 packets.
18/4/2014 -- 12:46:39 - <info>-- Found an MTU of 1492 for 'pppoe0'
18/4/2014 -- 12:46:39 - <info>-- Set snaplen to 1492 for 'pppoe0'
18/4/2014 -- 12:46:39 - <info>-- RunModeIdsPcapAutoFp initialised
18/4/2014 -- 12:46:39 - <info>-- stream "max-sessions": 262144
18/4/2014 -- 12:46:39 - <info>-- stream "prealloc-sessions": 32768
18/4/2014 -- 12:46:39 - <info>-- stream "memcap": 33554432
18/4/2014 -- 12:46:39 - <info>-- stream "midstream" session pickups: disabled
18/4/2014 -- 12:46:39 - <info>-- stream "async-oneside": disabled
18/4/2014 -- 12:46:39 - <info>-- stream "checksum-validation": disabled
18/4/2014 -- 12:46:39 - <info>-- stream."inline": disabled
18/4/2014 -- 12:46:39 - <info>-- stream.reassembly "memcap": 67108864
18/4/2014 -- 12:46:39 - <info>-- stream.reassembly "depth": 0
18/4/2014 -- 12:46:39 - <info>-- stream.reassembly "toserver-chunk-size": 2560
18/4/2014 -- 12:46:39 - <info>-- stream.reassembly "toclient-chunk-size": 2560
18/4/2014 -- 12:46:39 - <info>-- all 7 packet processing threads, 1 management threads initialized, engine started.
18/4/2014 -- 12:46:39 - <info>-- 1 rule files processed. 163 rules successfully loaded, 0 rules failed
18/4/2014 -- 12:46:39 - <info>-- 163 signatures processed. 0 are IP-only rules, 0 are inspecting packet payload, 35 inspect application layer, 76 are decoder event only
18/4/2014 -- 12:46:39 - <info>-- building signature grouping structure, stage 1: adding signatures to signature source addresses... complete
18/4/2014 -- 12:46:39 - <info>-- building signature grouping structure, stage 2: building source address list... complete
18/4/2014 -- 12:46:39 - <info>-- building signature grouping structure, stage 3: building destination address lists... complete
18/4/2014 -- 12:46:39 - <info>-- Signature(s) loaded, Detect thread(s) activated.
18/4/2014 -- 12:46:40 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
18/4/2014 -- 12:46:40 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
18/4/2014 -- 12:46:40 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
( lots of repeats snipped )</error></error></error></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info>
                                  1 Reply Last reply Reply Quote 0
                                  • bmeeksB
                                    bmeeks
                                    last edited by

                                    @Gibbon_99:

                                    Remove and reinstall done - no change - still get the error when using the WAN interface.

                                    I have created a LAN interface mapping, and it works just fine.

                                    The WAN mapping is a PPPOE interface - looks like that type is not yet supported.

                                    Here is the log for the working LAN interface ( type em0 ):

                                    
18/4/2014 -- 12:42:24 - <info>-- allocated 1572864 bytes of memory for the defrag hash... 65536 buckets of size 24
18/4/2014 -- 12:42:24 - <info>-- preallocated 65535 defrag trackers of size 120
18/4/2014 -- 12:42:24 - <info>-- defrag memory usage: 9437064 bytes, maximum: 33554432
18/4/2014 -- 12:42:24 - <info>-- AutoFP mode using "Active Packets" flow load balancer
18/4/2014 -- 12:42:24 - <info>-- preallocated 1024 packets. Total memory 4294656
18/4/2014 -- 12:42:24 - <info>-- allocated 98304 bytes of memory for the host hash... 4096 buckets of size 24
18/4/2014 -- 12:42:24 - <info>-- preallocated 1000 hosts of size 96
18/4/2014 -- 12:42:24 - <info>-- host memory usage: 194304 bytes, maximum: 16777216
18/4/2014 -- 12:42:24 - <info>-- allocated 1572864 bytes of memory for the flow hash... 65536 buckets of size 24
18/4/2014 -- 12:42:24 - <info>-- preallocated 10000 flows of size 224
18/4/2014 -- 12:42:24 - <info>-- flow memory usage: 3812864 bytes, maximum: 33554432
18/4/2014 -- 12:42:24 - <info>-- IP reputation disabled
18/4/2014 -- 12:42:24 - <info>-- Added "35" classification types from the classification file
18/4/2014 -- 12:42:24 - <info>-- Added "19" reference types from the reference.config file
18/4/2014 -- 12:42:24 - <info>-- using magic-file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/magic
18/4/2014 -- 12:42:24 - <info>-- Delayed detect enabled
18/4/2014 -- 12:42:24 - <info>-- Packets will start being processed before signatures are active.
18/4/2014 -- 12:42:24 - <info>-- Threshold config parsed: 1 rule(s) found
18/4/2014 -- 12:42:24 - <info>-- Core dump size is unlimited.
18/4/2014 -- 12:42:24 - <info>-- fast output device (regular) initialized: alerts.log
18/4/2014 -- 12:42:24 - <info>-- Unified2-alert initialized: filename unified2.alert, limit 32 MB
18/4/2014 -- 12:42:24 - <info>-- http-log output device (regular) initialized: http.log
18/4/2014 -- 12:42:24 - <info>-- Syslog output initialized
18/4/2014 -- 12:42:24 - <info>-- Using 1 live device(s).
18/4/2014 -- 12:42:24 - <info>-- using interface em0
18/4/2014 -- 12:42:24 - <info>-- Running in 'auto' checksum mode. Detection of interface state will require 1000 packets.
18/4/2014 -- 12:42:24 - <info>-- Found an MTU of 1500 for 'em0'
18/4/2014 -- 12:42:24 - <info>-- Set snaplen to 1500 for 'em0'
18/4/2014 -- 12:42:24 - <info>-- RunModeIdsPcapAutoFp initialised
18/4/2014 -- 12:42:24 - <info>-- stream "max-sessions": 262144
18/4/2014 -- 12:42:24 - <info>-- stream "prealloc-sessions": 32768
18/4/2014 -- 12:42:24 - <info>-- stream "memcap": 33554432
18/4/2014 -- 12:42:24 - <info>-- stream "midstream" session pickups: disabled
18/4/2014 -- 12:42:24 - <info>-- stream "async-oneside": disabled
18/4/2014 -- 12:42:24 - <info>-- stream "checksum-validation": disabled
18/4/2014 -- 12:42:24 - <info>-- stream."inline": disabled
18/4/2014 -- 12:42:24 - <info>-- stream.reassembly "memcap": 67108864
18/4/2014 -- 12:42:24 - <info>-- stream.reassembly "depth": 0
18/4/2014 -- 12:42:24 - <info>-- stream.reassembly "toserver-chunk-size": 2560
18/4/2014 -- 12:42:24 - <info>-- stream.reassembly "toclient-chunk-size": 2560
18/4/2014 -- 12:42:24 - <info>-- all 7 packet processing threads, 1 management threads initialized, engine started.
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - Signature combines packet specific matches (like dsize, flags, ttl) with stream / state matching by matching on app layer proto (like using http_* keywords).
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $HOME_NET any -> $EXTERNAL_NET 1024:65535 (msg:"MALWARE-CNC Win.Trojan.Fakeavlock variant outbound connection"; flow:to_server,established; dsize:267<>276; content:"User-Agent|3A| Mozilla/5.0 (Windows|3B| U|3B| MSIE 9.0|3B| Windows NT 9.0|3B| en-US)|0D 0A|"; fast_pattern:only; http_header; urilen:159; pcre:"/\x2f[A-F0-9]{158}/U"; metadata:impact_flag red, policy balanced-ips drop, policy security-ips drop, ruleset community, service http; reference:url,www.virustotal.com/file/c49f7dbc036ad0a86df02cbbde00cb3b3fbd651d82f6c9c5a98170644374f64f/analysis/; classtype:trojan-activity; sid:25675; rev:7;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/rules/suricata.rules at line 59
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - previous keyword has a fast_pattern:only; set. Can't have relative keywords around a fast_pattern only content
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $EXTERNAL_NET $HTTP_PORTS -> $HOME_NET any (msg:"MALWARE-OTHER Win.Trojan.Zeus Spam 2013 dated zip/exe HTTP Response - potential malware download"; flow:to_client,established; content:"-2013.zip|0D 0A|"; fast_pattern:only; content:"-2013.zip|0D 0A|"; http_header; content:"-"; within:1; distance:-14; http_header; file_data; content:"-2013.exe"; content:"-"; within:1; distance:-14; metadata:impact_flag red, policy balanced-ips drop, policy security-ips drop, ruleset community, service http; reference:url,www.virustotal.com/en/file/2eff3ee6ac7f5bf85e4ebcbe51974d0708cef666581ef1385c628233614b22c0/analysis/; classtype:trojan-activity; sid:26470; rev:1;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/rules/suricata.rules at line 94
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - previous keyword has a fast_pattern:only; set. Can't have relative keywords around a fast_pattern only content
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $HOME_NET any -> $EXTERNAL_NET $HTTP_PORTS (msg:"MALWARE-CNC Bancos fake JPG encrypted config file download"; flow:to_server,established; content:".com.br|0D 0A 0D 0A|"; fast_pattern:only; content:"/imagens/"; depth:9; http_uri; content:".jpg"; distance:0; http_uri; pcre:"/\.jpg\x20HTTP\/1\.[01]\r\nUser\x2dAgent\x3a\x20[a-z]+\r\nHost\x3a\x20[a-z0-9\x2d\x2e]+\.com\.br\r\n\r\n$/"; metadata:impact_flag red, policy balanced-ips drop, policy security-ips drop, ruleset community, service http; classtype:trojan-activity; sid:26722; rev:1;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/rules/suricata.rules at line 129
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - Signature combines packet specific matches (like dsize, flags, ttl) with stream / state matching by matching on app layer proto (like using http_* keywords).
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $HOME_NET any -> $EXTERNAL_NET $HTTP_PORTS (msg:"MALWARE-CNC Win32/Autorun.JN variant outbound connection"; flow:to_server,established; dsize:142; urilen:8; content:"/u5.htm"; fast_pattern:only; http_uri; content:"//u5.htm"; http_raw_uri; metadata:impact_flag red, policy balanced-ips drop, policy security-ips drop, ruleset community, service http; reference:url,www.microsoft.com/security/portal/threat/encyclopedia/Entry.aspx?Name=Worm%3AWin32%2FAutorun.JN; reference:url,www.virustotal.com/en/file/36144738373c665d262bc007fceaeb9613e59ec29ea3d7424dd9f400af2c0f06/analysis/; classtype:trojan-activity; sid:26966; rev:3;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/rules/suricata.rules at line 189
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - Signature combines packet specific matches (like dsize, flags, ttl) with stream / state matching by matching on app layer proto (like using http_* keywords).
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $HOME_NET any -> $EXTERNAL_NET 80 (msg:"MALWARE-CNC Win.Trojan.Conficker variant outbound connection"; flow:to_server,established; dsize:146; urilen:1; content:"GET / HTTP/1.1|0D 0A|User-Agent: Mozilla/4.0 (compatible|3B| MSIE 7.0|3B| Windows NT 5.1|3B| Trident/4.0)|0D 0A|Host: checkip.dyndns.org|0D 0A|Cache-Control: no-cache|0D 0A 0D 0A|"; fast_pattern:only; metadata:impact_flag red, policy balanced-ips drop, policy security-ips drop, ruleset community, service http; reference:url,www.sans.org/security-resources/malwarefaq/conficker-worm.php; classtype:trojan-activity; sid:28542; rev:1;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/rules/suricata.rules at line 291
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - Signature combines packet specific matches (like dsize, flags, ttl) with stream / state matching by matching on app layer proto (like using http_* keywords).
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $HOME_NET any -> $EXTERNAL_NET 80 (msg:"MALWARE-CNC Win.Trojan.Conficker variant outbound connection"; flow:to_server,established; dsize:139; urilen:1; content:"GET / HTTP/1.1|0D 0A|User-Agent: Mozilla/4.0 (compatible|3B| MSIE 7.0|3B| Windows NT 5.1|3B| Trident/4.0)|0D 0A|Host: www.ask.com|0D 0A|Cache-Control: no-cache|0D 0A 0D 0A|"; fast_pattern:only; metadata:impact_flag red, policy balanced-ips drop, policy security-ips drop, ruleset community, service http; reference:url,www.sans.org/security-resources/malwarefaq/conficker-worm.php; classtype:trojan-activity; sid:28543; rev:1;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/rules/suricata.rules at line 292
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - previous keyword has a fast_pattern:only; set. Can't have relative keywords around a fast_pattern only content
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $HOME_NET any -> $EXTERNAL_NET $HTTP_PORTS (msg:"MALWARE-CNC Win.Trojan.Injector variant outbound communication"; flow:to_server,established; urilen:9; content:"/load.exe HTTP/1.1|0D 0A|User-Agent: Mozilla/"; fast_pattern:only; content:"|3B 20|MSIE|20|"; http_header; content:")|0D 0A|Host: "; distance:0; http_header; content:!"Accept"; http_header; metadata:impact_flag red, policy balanced-ips drop, policy security-ips drop, ruleset community, service http; reference:url,urlquery.net/search.php?q=%5C%2Fload%5C.exe%24&type=regexp&start=2013-08-24&end=2013-11-22&max=400; reference:url,www.virustotal.com/en/file/032572ea1f34a060ecac98a8e2899dc0f2a41dff199e879050481ddd3818b4d0/analysis/; classtype:trojan-activity; sid:28807; rev:1;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/rules/suricata.rules at line 298
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - Signature combines packet specific matches (like dsize, flags, ttl) with stream / state matching by matching on app layer proto (like using http_* keywords).
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $HOME_NET any -> $EXTERNAL_NET $HTTP_PORTS (msg:"MALWARE-CNC Win.Trojan.WEC variant outbound connection"; flow:to_server,established; dsize:69; urilen:1; content:"GET / HTTP/1.1|0D 0A|User-Agent: Mozilla/4.0|0D 0A|Host: checkip.dyndns.org|0D 0A 0D 0A|"; fast_pattern:only; metadata:impact_flag red, policy balanced-ips drop, policy security-ips drop, ruleset community, service http; reference:url,www.virustotal.com/en/file/164c792247b2822ab1dce8271a9498d3c9172ff21d36feccf83265ded1be8d0b/analysis/; classtype:trojan-activity; sid:29882; rev:2;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/rules/suricata.rules at line 416
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - previous keyword has a fast_pattern:only; set. Can't have relative keywords around a fast_pattern only content
18/4/2014 -- 12:42:24 - <error>-- [ERRCODE: SC_ERR_INVALID_SIGNATURE(39)] - error parsing signature "alert tcp $HOME_NET any -> $EXTERNAL_NET $HTTP_PORTS (msg:"MALWARE-CNC Win.Trojan.Bancos variant outbound connection "; flow:to_server,established; content:"Content-Length: 166"; content:".php HTTP/1.1|0D 0A|Accept: */*|0D 0A|Content-Type: application/x-www-form-urlencoded|0D 0A|User-Agent: Mozilla/5.0 (Windows NT 6.1|3B| Trident/7.0|3B| rv:11.0) like Gecko|0D 0A|Host: "; fast_pattern:only; content:"v="; depth:2; http_client_body; content:"&c="; within:7; http_client_body; pcre:"/\x3d\x3d$/P"; metadata:impact_flag red, policy balanced-ips drop, policy security-ips drop, ruleset community, service http; reference:url,www.virustotal.com/en/file/51540d7c9a4bc2a430bc50c85cf9cec5c6f2bb755e800a3f3575ba34fe5f008c/analysis; classtype:trojan-activity; sid:29895; rev:1;)" from file /usr/pbi/suricata-amd64/etc/suricata/suricata_12618_em0/rules/suricata.rules at line 421
18/4/2014 -- 12:42:28 - <info>-- No packets with invalid checksum, assuming checksum offloading is NOT used
18/4/2014 -- 12:42:35 - <info>-- 2 rule files processed. 15090 rules successfully loaded, 9 rules failed</info></info></error></error></error></error></error></error></error></error></error></error></error></error></error></error></error></error></error></error></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info>

                                    Here's the log for the not working WAN interface ( type PPPOE )

                                    
18/4/2014 -- 12:46:39 - <info>-- allocated 1572864 bytes of memory for the defrag hash... 65536 buckets of size 24
18/4/2014 -- 12:46:39 - <info>-- preallocated 65535 defrag trackers of size 120
18/4/2014 -- 12:46:39 - <info>-- defrag memory usage: 9437064 bytes, maximum: 33554432
18/4/2014 -- 12:46:39 - <info>-- AutoFP mode using "Active Packets" flow load balancer
18/4/2014 -- 12:46:39 - <info>-- preallocated 1024 packets. Total memory 4294656
18/4/2014 -- 12:46:39 - <info>-- allocated 98304 bytes of memory for the host hash... 4096 buckets of size 24
18/4/2014 -- 12:46:39 - <info>-- preallocated 1000 hosts of size 96
18/4/2014 -- 12:46:39 - <info>-- host memory usage: 194304 bytes, maximum: 16777216
18/4/2014 -- 12:46:39 - <info>-- allocated 1572864 bytes of memory for the flow hash... 65536 buckets of size 24
18/4/2014 -- 12:46:39 - <info>-- preallocated 10000 flows of size 224
18/4/2014 -- 12:46:39 - <info>-- flow memory usage: 3812864 bytes, maximum: 33554432
18/4/2014 -- 12:46:39 - <info>-- IP reputation disabled
18/4/2014 -- 12:46:39 - <info>-- Added "35" classification types from the classification file
18/4/2014 -- 12:46:39 - <info>-- Added "19" reference types from the reference.config file
18/4/2014 -- 12:46:39 - <info>-- using magic-file /usr/pbi/suricata-amd64/etc/suricata/suricata_51110_pppoe0/magic
18/4/2014 -- 12:46:39 - <info>-- Delayed detect enabled
18/4/2014 -- 12:46:39 - <info>-- Packets will start being processed before signatures are active.
18/4/2014 -- 12:46:39 - <info>-- Threshold config parsed: 0 rule(s) found
18/4/2014 -- 12:46:39 - <info>-- Core dump size is unlimited.
18/4/2014 -- 12:46:39 - <info>-- fast output device (regular) initialized: alerts.log
18/4/2014 -- 12:46:39 - <info>-- http-log output device (regular) initialized: http.log
18/4/2014 -- 12:46:39 - <info>-- Syslog output initialized
18/4/2014 -- 12:46:39 - <info>-- Using 1 live device(s).
18/4/2014 -- 12:46:39 - <info>-- using interface pppoe0
18/4/2014 -- 12:46:39 - <info>-- Running in 'auto' checksum mode. Detection of interface state will require 1000 packets.
18/4/2014 -- 12:46:39 - <info>-- Found an MTU of 1492 for 'pppoe0'
18/4/2014 -- 12:46:39 - <info>-- Set snaplen to 1492 for 'pppoe0'
18/4/2014 -- 12:46:39 - <info>-- RunModeIdsPcapAutoFp initialised
18/4/2014 -- 12:46:39 - <info>-- stream "max-sessions": 262144
18/4/2014 -- 12:46:39 - <info>-- stream "prealloc-sessions": 32768
18/4/2014 -- 12:46:39 - <info>-- stream "memcap": 33554432
18/4/2014 -- 12:46:39 - <info>-- stream "midstream" session pickups: disabled
18/4/2014 -- 12:46:39 - <info>-- stream "async-oneside": disabled
18/4/2014 -- 12:46:39 - <info>-- stream "checksum-validation": disabled
18/4/2014 -- 12:46:39 - <info>-- stream."inline": disabled
18/4/2014 -- 12:46:39 - <info>-- stream.reassembly "memcap": 67108864
18/4/2014 -- 12:46:39 - <info>-- stream.reassembly "depth": 0
18/4/2014 -- 12:46:39 - <info>-- stream.reassembly "toserver-chunk-size": 2560
18/4/2014 -- 12:46:39 - <info>-- stream.reassembly "toclient-chunk-size": 2560
18/4/2014 -- 12:46:39 - <info>-- all 7 packet processing threads, 1 management threads initialized, engine started.
18/4/2014 -- 12:46:39 - <info>-- 1 rule files processed. 163 rules successfully loaded, 0 rules failed
18/4/2014 -- 12:46:39 - <info>-- 163 signatures processed. 0 are IP-only rules, 0 are inspecting packet payload, 35 inspect application layer, 76 are decoder event only
18/4/2014 -- 12:46:39 - <info>-- building signature grouping structure, stage 1: adding signatures to signature source addresses... complete
18/4/2014 -- 12:46:39 - <info>-- building signature grouping structure, stage 2: building source address list... complete
18/4/2014 -- 12:46:39 - <info>-- building signature grouping structure, stage 3: building destination address lists... complete
18/4/2014 -- 12:46:39 - <info>-- Signature(s) loaded, Detect thread(s) activated.
18/4/2014 -- 12:46:40 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
18/4/2014 -- 12:46:40 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
18/4/2014 -- 12:46:40 - <error>-- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap
( lots of repeats snipped )</error></error></error></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info>

                                    Yep, that is the problem – PPPoE does not appear to be supported by the underlying Suricata binary.  I will research to see if there is anything I might could do to address this.  I seem to remember some folks using Snort just fine on a PPPoE interface, and Snort and Suricata both are using the same libpcap library on pfSense.

                                    Bill

                                    1 Reply Last reply Reply Quote 0
                                    • BBcan177B
                                      BBcan177 Moderator
                                      last edited by

                                      @bmeeks:

                                      Yep, that is the problem – PPPoE does not appear to be supported by the underlying Suricata binary.  I will research to see if there is anything I might could do to address this.  I seem to remember some folks using Snort just fine on a PPPoE interface, and Snort and Suricata both are using the same libpcap library on pfSense.

                                      I have one of my pfSense boxes on ppoe with Snort for over a year without any issue like this. Just an FYI.

                                      "Experience is something you don't get until just after you need it."

                                      Website: http://pfBlockerNG.com
                                      Twitter: @BBcan177  #pfBlockerNG
                                      Reddit: https://www.reddit.com/r/pfBlockerNG/new/

                                      1 Reply Last reply Reply Quote 0
                                      • M
                                        Mr. Jingles
                                        last edited by

                                        I can confirm I have the same problem, my log is flooded with this:

                                        suricata: 14/6/2014 -- 12:13:21 - <error> -- [ERRCODE: SC_ERR_DATALINK_UNIMPLEMENTED(38)] - Error: datalink type 0 not yet supported in module DecodePcap</error>

                                        This might perhaps also explain why I don't see any hits on WAN (VDSL2) (but also not on WAN2 (Cable), for that matter), but quite some on LAN.

                                        Suricata 1.4.6 pkg v1.0.3

                                        It runs on VDSL2 (PPPoE), Cable (DHCP), and LAN.

                                        Snort, which I ran for over a year did not show these errors. I only switched to Suricata yesterday as smart people in here recommended to do so.

                                        6 and a half billion people know that they are stupid, agressive, lower life forms.

                                        1 Reply Last reply Reply Quote 0
                                        • C
                                          Cino
                                          last edited by

                                          I'm trying to setup Suricata basically the same way I have snort configured today and I may have found an issue or maybe the snort code wasn't carried over.

                                          Home Net and External Net are not pulling from 'Pass Lists' tab like they do in Snort. Only the Pass List area is able to pull from the list in Suricata..

                                          Another issue I found is in the Alert log… In Snort, IPv6 address are compress if there are a bunch of 0:0:0... So an address may look like 123:345:567::1. In Suricata, they are displaying like 123:345:567:0000:0000:0000:0000:1..  Hopefully that is something that can be fix

                                          thanks again!!

                                          1 Reply Last reply Reply Quote 0
                                          • dotOneD
                                            dotOne
                                            last edited by

                                            It seems suricata has the same issue with the IPv6 link-local address as Snort has.
                                            The default home net has the external link-local address with the interface reference in it.
                                            This results in an error when parsing the home nets.

                                            Jun 25 15:41:05 suricata: 25/6/2014 – 15:41:05 - <error>-- [ERRCODE: SC_ERR_INVALID_YAML_CONF_ENTRY(139)] - failed to parse address var "HOME_NET" with value "[10.0.8.0/24,10.0.9.0/24,10.0.18.0/24,10.0.19.0/24,64.4.0.0/18,64.233.160.0/19,65.52.0.0/14,66.102.0.0/20,66.249.64.0/19,72.14.192.0/18,74.125.0.0/16,82.75.177.152/32,82.94.229.0/24,82.101.62.110/32,127.0.0.1,131.253.21.0/24,131.253.22.0/23,131.253.24.0/21,131.253.32.0/20,157.54.0.0/32,157.56.0.0/14,157.60.0.0/16,172.16.1.0/24,172.16.3.0/24,192.168.1.0/24,192.168.2.0/24,192.168.10.0/24,194.109.0.0/16,194.109.5.175,194.109.6.66,194.109.9.99,207.46.0.0/16,207.68.128.0/18,207.68.192.0/20,209.85.128.0/17,212.238.xxx.xxx,213.75.10.0/24,213.84.136.0/24,216.239.32.0/18,2001:888:0:6::66,2001:888:0:9::99,2001:888:0:80::1/128,2001:888:2000:49::/48,2001:xxxx:xxxx:0:xxxx:xxxx:xxxx:xxxx/128,2001:xxxx:xxxx:1::/64,2001:xxxx:xxxx:2::/64,2001:xxxx:xxxx:3::/64,fe80::2a0:a50f:fc78:5530,[b]fe80::290:bff:fe32:5b2e%em0]". Please check it's syntax
                                            Jun 25 15:41:05 suricata: 25/6/2014 – 15:41:05 - <error>-- [ERRCODE: SC_ERR_ADDRESS_ENGINE_GENERIC(89)] - failed to parse address "fe80::290:bff:fe32:5b2e%em0"
                                            Jun 25 15:41:05 suricata: 25/6/2014 – 15:41:05 - <error>-- [ERRCODE: SC_ERR_ADDRESS_ENGINE_GENERIC(89)] - failed to parse address "fe80::290:bff:fe32:5b2e%em0"
                                            Jun 25 15:41:05 suricata: 25/6/2014 – 15:41:05 - <info>-- AutoFP mode using "Active Packets" flow load balancer
                                            Jun 25 15:41:05 suricata: 25/6/2014 -- 15:41:05 - <info>-- defrag memory usage: 9437064 bytes, maximum: 33554432
                                            Jun 25 15:41:05 suricata: 25/6/2014 -- 15:41:05 - <info>-- preallocated 65535 defrag trackers of size 120
                                            Jun 25 15:41:05 suricata: 25/6/2014 -- 15:41:05 - <info>-- allocated 1572864 bytes of memory for the defrag hash... 65536 buckets of size 24</info></info></info></info></error></error></error>

                                            Using snort I can supply a home list and an external net by creating an alias.
                                            On suricata I can create an alias but it will not show up in the drop-down list.

                                            When looking in suricata_interfaces_edit.php I see the drop-down is populated using a passlist, however I cannot create a whitelist but only a passlist (used in the alert suppression).

                                            home net: line 697:
                                                           
                                                           
                                                                    <select name="homelistname" class="formselect" id="homelistname">                                                                        echo "<option value="default">default</option>";                                        /* find whitelist names and filter by type /                                        if (is_array($suricataglob['whitelist']['item'])) {                                                foreach ($suricataglob[[color=blue]'whitelist']['item'] as $value) {                                                        $ilistname = $value['name'];                                                        if ($ilistname == $pconfig['homelistname'])                                                                echo "<option value="$ilistname" selected="">";                                                        else                                                                echo "</option><option value="$ilistname">";                                                        echo htmlspecialchars($ilistname) . '</option>';Alert suppression: line 775:                                                       </select>
                                                                                                    /                                             find passlist names and filter by type, make sure to track by uuid */
                                                                            echo "<option value="default">default</option>\n";
                                                                            if (is_array($suricataglob['passlist']['item'])) {
                                                                                    foreach ($suricataglob['passlist']['item'] as $value) {
                                                                                            if ($value['name'] == $pconfig['passlistname'])
                                                                                                    echo "<option value="{$value[" name']}'="" selected="">";</option>

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.